-
Allow combining Smart AC Control and Smart Radiators in one room
Currently, Tado App doesn’t allow combining Smart AC Control and Smart Radiator in the same room. Please enable this feature.
-
Tado x Thermostat - Set the MAX temp
Hi, I need (so fast as possible) the ability to lock (via software) the thermostat X or to set the max temp so that people cannot set the temperature above the set threshold. Urgent!!
-
Configurable "How many degrees to change"-setting for X devices
Especially for X, it is a pain for non-technical users to use the device manually, especially to turn it on and off. This has changed since V3, as X seems to require much more movement on the device I would therefore like to be able to configure a "How many degrees to change"-delta value for my household. It should be…
-
Enable tado on wifi without internet
Today I had 6 hours without heating in the winter. My internet was not working for 6 hours. Tado expects the bridge to be connected to internet for smart scheduler to work and connect with wireless thermostats. Why not enable bridge using wifi home without internet? A heating system should never rely on internet. Relying…
-
Making smart schedule more smart
Would be nice have one page in which they are group the history for heating activity of all rooms together, to have more clear when the boiler can be left off reducing one or more temperatures at a certain time. (Sorry for my English)
-
Guest car support
For guests using the home charger, offer the capability to control the charger timings by: - manually setting start and finish state of charge - departure time - make/model of car
-
Heating System Override switching it on for 1hr, 2hr 3hr or set a time
Strangely, the Tado system allows you switch on the hot water heating for a specified time outside the schedule. But it is not possible to do the same for the heating. Instead, you have go into each device, which is a ridiculously time consuming and fiddly process. Yet, it is standard functionality on most central heating…
-
Hot water override
need an ability to 'boost' hot water for a short period of time. We have a system with a hot water tank. Sometimes we can run low on hot water and need an option to boost it for a short period - say 30/45mins. Currently the app allows you to override the schedule until the next event, inevitably it means you turn on the…
-
Tado x regolare la temperatura dei caloriferi, impostare icona quando la caldaia è accesa
Buonasera chiedo di poter impostare su ogni testa termostatica la temperatura di mandata nel calorifero per tutti quelli che non hanno il protocollo opentherm in modo tale da regolare automaticamente con l'algoritmo in base al meteo ecc la temperatura dell'acqua dei termosifoni. Mettere una spia su app per vedere quando si…
-
Geolocation Improvement's for Mobile users W3W?
Tado like devices often get repurposed into not conventional ‘homes’, such as canal boats and Rv’s Could the home location be made dynamic either using data from the home network ( our teletonica router has a gps function)? If that is too complicated or not possible due to the hardware limitations in the internet bridge,…
-
IFTTT replacement - customised boost temperature and duration
I used to use IFTTT to boost my heating to 21 or 22 degrees for 1-2 hours depending on the setting. It was WAY more useful than just 25 degrees for 30 minutes. Tado removed the integration, but could features like this be integrated into the app then? It seems like an easy change, we can already boost, it just needs to…
-
tado GmbH Incident - degraded performance affecting the tado° app - 19 November 2024
Yesterday, as reported by tado GmbG Inicident, there was a temporary degraded performance affecting the tado app. Just to inform you how this incident may have affected my Panasonic Aquarea heat pump system. It appeared that the heat pump did not warm the house at all for some hours. Due to the heat already present in the…
-
Set Humidex instead temperature
It can be useful to have the option to set the perceived temperature instead only the normal temperature. In the high humidity zones temperature is not significant. It would be nice to trigger the air conditioning with your wireless control to decrease humidity.
-
Smart wall plug for underfloor heating pump
You offer nearly everything except a way to turn a underfloor heating pump on or off. My living room thermostat is connected to the underfloor heating, and to control the pump I have to set up a complicated process through Homey and a Z-Wave smart wall plug. It would be great to have a Tado smart wall plug which can be…
-
temperature adjusted at the radiator valves
If the temperature is adjusted at the radiator valves, that new temperature remains set until someone adjusts it again or until someone chooses to go to the schedule at the next schedule change. I would like to be able to decide myself via the setting what the reaction should be when turning the radiator valves. In my…
-
Funzioni in app
1 ) Sarebbe utile integrare in app la possibilità di variare manualmente la temperatura di mandata dell'acqua. 2) Quando alla caldaia è collegata una sonda esterna utilizzare la temperatura letta da essa ( sicuramente più precisa ) per regolare la temperatura interna perchè i dati del meteo sono troppo generici e succede,…
-
Smart AC Control X
You should definitely make a Smart AC Control X. Tado X is awesome, but the finishing touch would be automatic dehumidification. Using the air conditioner to dehumidify in the winter is a lot more energy efficient than opening a window. I'd love to be able to set a target humidity level or range, and have you take care of…
-
[suggestion] Change icon for room block
Hi! On the Room & Devices screen you have a list of blocks. Each block represents room and devices located in this room. It's clear when you see right arrow icon for the device. Once pressing you see device settings screen. But when I see the same arrow for the room - it's not clear what it does. Actually it opens a screen…
-
Less confusion about being at home
The Tado app has a small piece of code in the Geofencing area which pulls the trigger defining that one is at home, by recognising a home network and logging into it. It has a small oversight which confuses it. In an old thick walled house it is often necessary to fit wireless repeaters or powerline wireless nodes. They…
-
Extend the diameter of the Home Area.
Way back around 2013, when I first fitted a Tado system with an extension kit as a relay control over the boiler, there was a bug in Tado's system. It couldn't locate my actual address correctly on the map and it also allowed me to set the Home Area diameter to as much as 50 miles away from home. Since moving into a very…
-
Add command ON/OFF of the system in the wireless sensor Thermostat
Hi is possible add to the wireless sensor thermostat the command of on/off of the system, like is in the app of mobile. The same way that the temperature of the hot water is adjusted to the thermostat menu. Thank
-
Ensure that Tado Support reply to support requests
Hello, I have messaged tado customer support numerous times over the past few days (including setting up new message threads). However, I have not received a reply. My suggestion for improvement is that you improve this situation and make sure requests for support are answered. Mine is quite urgent because my tado has…
-
Room type and management
I would propose one new room type be added namely "hallway". I have many hallway radiators and the current profiles don't really fit any of the default templates. Another thing I have noticed but probably just a bug is the renaming of rooms doesn't seem to reflect on the Android Home screen. Although I have changed the…
-
Away/home status in Alexa
Hello, Since ifttt is OUT, it's important to have the tado status return on Alexa routine. We need to have this information: away, home. I think it's the same for google. Regard
-
Make Smart AC Control expose more AC settings to HomeKit?
Is there any reason why the only options in HomeKit are cooling, heating and off? In the Tado app I can see that it knows the commands for auto mode, dry mode, fan mode, fan speed, tilt, fixed etc. HomeKit supports these modes and settings, I don't think it would be that difficult to expose these modes and settings to…
-
language for android
Hello, please add language settings for Android in the app
-
Temperature still visible with grouped TRV’s
In my Living Room I have multiple TRV’s, two of them for some reason intermittently lose connection. When this happens I cannot see the temperature on the main screen of the app. It just says the whole room has a fault. I think it would be better if you could still see the temperature of the room on this screen but there…
-
"feels like" temperature setting
21c feels quite different depending on the humidity in the room It would be great if the trv would adjust accordingly, depending on the humidity.
-
Merged: Multiple homes
This discussion has been merged.
-
More than one PV array
Hi, The ability to add your Solar Array details to your Tado Balance system was launched a few days ago. Sadly, it doesn't give any way to add more than one array, and I assume most of us have solar panels on more than one area. In my case it's South-West, North-Eas and South East with different angles and numbers of…