-
Zone controller by definition off
In the current softwareversion all installed thermostats get the same zone controller after installing a wall thermostat. This should not happen by default. Can't this be changed by making this a configuration part of the initial installation when a wall thermostat is added to the system, where the user gets the option to…
-
Support for the EMS2 bus - Bosch Condens
Bosch / Junkers / Nefit boilers with the EMS2 bus have been on the market for many years now, have a large chunk of the European market share but Tado only supports relay operation for them. I myself have a Condens 2300i boiler and while the relay mode works up to a point, the TPI algorithm operating the relay can't avoid…
-
Include a full calendar plan
I miss a feature to plan with my Tado radiator knops on a calendar day basis. For example planning a period of holidays (heating off/away), indicating days I work from home (heating in my working room on during working hours) The current weekly schedule by room is a good start but very limited when things do not follow a…
-
Set max temp for manual
There is currently a feature for auto stopping manual overrides on radiator valves but there is no option to set the max temperature allowed. My kids keep turning up the temperature to max. Can you consider adding a max temperature setting.
-
Tado Wifi enabled Hot Water Cylinder Temperature Thermostat Display & Controller
As far as I can understand, if you do not have a smart (oil or gas) boiler or a boiler that can separately control and heat only your hot water you are limited to the control and heating of your hot water cylinder by timer schedules only. However a timer schedule cannot detect if you already have enough supply or hot…
-
Geolocatie per kamer per gsm toestel. Nuttig voor thuiswerkers of oudere kinderen in het huis.
Beste voorstel. Op één kamer in het huis zou ik deze graag laten kijken naar geolocatie van 1 gsm toestel ipv alle gezinsleden. Voorbeeld: zoon 1 is enkele dagen thuis in de week maar dit is zeer onregelmatig. Voorbeeld : thuiswerker met onregelmatige dagen. bureau verwarming .
-
Suggestions left unanswered.
Hi, Many of us have been asking for it for a long time. I am the new user of TADO V3+ and I am actually satisfied with it. However, after reading many suggestions of other users, Tado does not take it seriously. A lot of comments on the appearance and functionality of the main screen. Windows 8 appearance is ok but why is…
-
Geofencing per room per person
My wife and I both work from home and have tado TRVs in our home offices. It would be useful if our individual rooms turned off heating when either of us leave the house. So if I’m still at home my room could stay heated but if my wife left the house the geofencing could detect that she was out and could turn the heating…
-
Wifi geofencing
It would be good if there was WiFi only geofencing. There is not point to keep GPS up whole day and drain battery. I know it would limit app to on and off rather than vicinity check but there is few benefits for me from GPS geofencing as home members keep turning GPS off to save battery life thus geofencing do not work as…
-
Multiple accounts in 1 Tado App
Being a fan of Tado, I introduced to both my kids and mother in law. My mother in law needs some assistance, and in case, I can have the control from my home. But needed an other divice, because it's not possible to have 2 accounts on the same app. Is it possible to add multiple accouts / living address to 1 app on 1…
-
Viesmann DHW Control - Set Temperature in ECO mode
I have Viessmann Vitodens 100-W B1kF connected via OpenTherm to a Wireless Receiver (EU) version. There seems to be a problem with DHW and I would like to share my experience after investigating and talking to Tado about it. I hope this suggestion will help others so that maybe Tado implements it. Situation Viessmann has 2…
-
Use a button instead of a slider
When enabling heating you need to fiddle with the slider to set the heating to a specific temperature but pretty much always I set the temperature to fixed value for a given room. It would be more convenient to just have a big button that would enable/disable heating and use the default target temperature (global… or even…
-
Modify Limits of Room Temperature Control
Is it possible to modify the upper limit of the Heating Temperature in the Smart Thermostat (it is currently restricted to 25 degrees Centigrade)?
-
Temperature limit on thermostats
Hallo, Is it possible to make the maximum temperature of Tado thermostats (currently 25 ºC/77 ºF) adjustable? Of course my question is related to the climate crisis and the current energy crisis in Europe. Some people do not save energy and their energy use has become extremely expensive. I'm looking for ways to limit…
-
Lock Set temperature limit peer room
Lock Limit of set temperature - bearing in mind global warming, as well as useful functions: the application lacks setting the maximum temperature in a given room, it is about manually setting to Smart thermostat and Smart radiator to, for example. The maximum possibility of setting the temperature was in the application…
-
Add new "fingertap on top"-functionality for X devices
It is possible to hold your finger on an X device in order to start configuring it, i.e. place your finger on the display, wait until the circle is completed, (re)configure as desired. Firstly, I would like the duration to be massively increased, e.g. 30 seconds, in order to make it more child safe, i.e. retain the…
-
Configurable "How many degrees to change"-setting for X devices
Especially for X, it is a pain for non-technical users to use the device manually, especially to turn it on and off. This has changed since V3, as X seems to require much more movement on the device I would therefore like to be able to configure a "How many degrees to change"-delta value for my household. It should be…
-
Protect thermostatic valves from stucking closed during summer (off heating season)
Most thermostatic valves get stuck if they are left in a CLOSED position for an extended period of time. In order to prevent this we could either 1) leave all valves OPEN when heating is off - if the heater does not work, it makes no difference which position the valves are, and in OPEN position they do not stuck. Or 2)…
-
Samsung Smartthings
Hey How do i get Tado radiator to work with Samsung Smartthings - I tried both smartthings app(classic) but no luck :(
-
Mac M1 and the Tado App
Is it possible to allow the app to run on the M1 and M2 series Mac computers ? Not everyone in our home has a smartphone, so it would be nice they can use their laptop to control Tado. I asked this question a year ago but no one seems to care. It requires no extra programming, just a setting to make the app visible on the…
-
Grouping rooms for boost/off
I have our house divided into rooms with timings setup that work majority of the time. But, it would be good to boost multiple rooms at once but not all rooms (eg downstairs). Would be great if you could have boost/off zones that consist of multiple rooms, without it being all rooms.
-
Manual adjust graph axis
I would like to be able to adjust the axis of the temperature graphs in the Tado app. Currently this goes automatically hence graph axes jump every day and is different for each room. That makes it difficult to compare different days or rooms and makes it difficult to observe how quickly a room heats up or cools down. I…
-
Dynamically adjust opening percentage based on rest of system as well as heat demand
A couple of weeks ago I posted a suggestion that users be allowed to set the minimum opening percentage on the smart valves to alleviate water rushing noise. In a separate thread about vibration, a solution was suggested to remove the Tado valve from the radiator nearest the boiler because "…it can happen that the water…
-
Icons for each room type
Can you give the ability to select a range of icons that can be applied for each room that we have. The Hot Water icon is a great example of a visual icon that is easy to see very quickly. We have 14 buttons for heating rooms in our house and it would be very helpful if there were icons for different rooms. For example,…
-
Enable tado on wifi without internet
Today I had 6 hours without heating in the winter. My internet was not working for 6 hours. Tado expects the bridge to be connected to internet for smart scheduler to work and connect with wireless thermostats. Why not enable bridge using wifi home without internet? A heating system should never rely on internet. Relying…
-
Making smart schedule more smart
Would be nice have one page in which they are group the history for heating activity of all rooms together, to have more clear when the boiler can be left off reducing one or more temperatures at a certain time. (Sorry for my English)
-
Combining TRV's into room groups
New to Tado so please excuse me if this is already possible… I have fitted 18 thermostatic valves to our heating system that is plumbed as 3 separate zones. Some rooms have multiple radiators that obviously show up individually in the operating app. Is it possible to cluster these into one room group which then averages…
-
Guest car support
For guests using the home charger, offer the capability to control the charger timings by: - manually setting start and finish state of charge - departure time - make/model of car
-
Worcester Bosch 4000 ems control
Please enable support of EMS / Ebus functionality so Tado can control modulation of this boiler
-
Energy IQ - Better process for when energy meter is replaced
I recently had to have our smart gas meter replaced, because the existing one became faulty. This meant that my meter reading dropped back to zero when the meter was replaced. When I came to enter a meter reading in Energy IQ, it said I could not enter a number lower than the previous reading. I contacted support, they…