-
Better Boost Options
I was pleased to see the boast function for the system but very disappointed that you can't select the temp (25 is way to high for my house), or select to just boost one room/trv. I find that I often want to boost a room for just 10mins, and only being able to boost for 30mins at 25 is wasteful and unnecessary. I see that…
-
Integrate outside air humidity
Vaak krijg ik van Tado het advies om een venster te openen om de luchtvochtigheid in huis te doen dalen. Dit terwijl het buiten vochtiger is dan binnen. Ik ben geen app ontwikkelaar en ken hier weinig van, maar is er een mogelijkheden om de luchtvochtigheid uit een online weerbericht te halen en zo het advies enkel te…
-
Smart boiler pressure gauge
Please create a smart boiler pressure gauge so that we can view boiler water pressure in the Tado app. I would like to get a notification from the Tado app if water pressure drops too low. Many thanks for your consideration.
-
Zones
Add the ability to set schedules for zones, keeping the individual devices as rooms, therefore seeing the temp and humidity for each area but controlling as a single schedule. Currently, you can an add multiple devices as a single room, setting a device as the master however you loose the visibility of what the…
-
Grouping rooms for boost/off
I have our house divided into rooms with timings setup that work majority of the time. But, it would be good to boost multiple rooms at once but not all rooms (eg downstairs). Would be great if you could have boost/off zones that consist of multiple rooms, without it being all rooms.
-
Group Rooms together
Hi, It would be beneficial to group rooms and schedules together. For instance if I want to boost the temp in certain rooms or update the schedule in certain rooms. I can hit the boost button or schedule them together
-
Need for multiple profiles
Dear Team, I have installed 12 Tados so far in my house and more are to come. I like the idea, although it is not a new one. However, yours seems to work 👌 Having said this, I am missing one huge functionality: as an example: if you have your kids over every other week, I would need to every week redo the schedules so as…
-
Greenstar 8000 EMS compatibility
Please develop EMS compatibility with Worcester Bosch Greenstar 8000 range to permit proper modulation control.
-
Allow "Auto" within HomeKit
Many smart heating systems when exposed to HomeKit allow the use of "OFF, HEAT and AUTO", even Drayton Wiser which can only be exposed through a custom made plug-in via homebridge can use AUTO. The AUTO function (at least as I see it) would allow the system to return back to the current schedule. For example, in HomeKit I…
-
New hardware product: controller for electric underfloor heating
Please consider adding a new item of hardware to your set of products; a controller for underfloor heating. Such a unit should: Be able to switch at least 16A. Have an integrated air temperature sensor. Have connections for an underfloor temperature probe. Support operation in 3 modes; air temp only, floor temp only and…
-
Apple Watch App
I've got quite a large Tado heating system installed on everything in my home. I've just got an Apple Watch. I get the notification when I leave home on the watch. However, I can't switch to away mode from the watch. This would be very useful (and also to be able to switch back to home mode). You definitely need to write…
-
Widget for iPhone
When you swipe to the right on a iphone, you get your widgets. It would be very handy, when there is a Tado widget available. I cab nmanage sereral home application through the widgets, but for Tado I must perform extra actions.
-
Support multiple wireless receivers / extension kits
Currently Tado seems to be limited to 1 wireless receiver or extension kit per home. Please could this be enhanced to allow multiple wireless receivers/kits, as this must surely be only a software restriction. I currently have an extension kit controlling my hot water, but this is a large house with multiple underfloor…
-
Limitations for larger properties
So, I've got a large property - 19 rooms 10 downstairs including hall, 9 upstairs including landing. Its an odd L shape as well which means i have concerns about distance. I was excited when i read tado supports 25 devices... and then i realised the limitations...having spoken with 1st line support... I want to zone each…
-
Android widget with home overview
I would like a widget where to quickly glimpse the home state: Home/Away Temperature/Humidity/Open Window for several (selected) rooms Does anybody else feel this would b e a nice addition?
-
Smart Rads power by rechargeable lithium ion AA batteries
Hi I just wanted to to share some tips that we can use the rechargeable lithium ion AA batteries. We can't keeps on replacing the alkaline AA as it only last about 6 months. I bought some Kentli brand it it does the job. It is still in the early days to see how long it last before indeed to recharge them. But I am hopeful…
-
Make the hot water schedule "smarter"
After returning home from holiday to find there is no hot water, I'm a little disappointed at how Tado deals with the "Smart Schedule" for hot water. I have a standard indirect hot water cylinder and have Tado set to top it up in the morning and in the evening. I recently went on holiday for a few days and returned home in…
-
Widget
would be really great if developers can adds widget for both android and iOS.
-
Be more intelligent with humidity warnings in Air Comfort
Right now you get warnings that your humidity is too high or may cause mould at certain hard coded values i.e. greater than 60% RH or greater than 70% RH for mould. However, humidity is only an issue when it is colder outside and humid air reaches a surface that causes it to reach its dew point by cooling down and causing…
-
Maximum Temperature Limit
Hi there, with the increasing cost of fuel , I was thinking that a maximum temperature limit may be of some use that could be set by the account holder in order to prevent "temperature tampering" by anyone not authorised. This could possibly be built into the app, and hopefully could save money. Any thoughts !
-
Show heater temperature information when heating (+ control parameters)
Currently, using OpenTherm, Tado can ramp up the heater temperature very quickly. Sometimes even reaching 80 degrees. It would be great if a tile in the app can show the temperature of the water in the heating system. It is indicated on the heater itself and also on my previous thermostat. Offering this in a graph showing…
-
Outside temperature visible on room screens
As it says above.
-
Manual open window in the app.
I know tado only registers an open window when it detects a huge change in temperature or humidity. But the window in my bedroom and the living room is most of the time open and tado doesn't register. Now the AirComfort gives me an "okay" instead of perfect score because the window didn't open for the past 24 hours…
-
trigger reminder when open window timer expires
The open window detection is a useful feature; to make it more useful, I'd like be reminded when the timer expires because sometime you forget that a window is open or you'd like to keep the window open for longer; by sending a reminder it helps me either to close the window just when the heating is coming on again, or if…
-
Offline notification
My Internet Bridge went off-line and I didn't realise for hours. A simple reset was all it took to fix the issue, which I could have done way sooner if I'd realised. Tado sends other notifications, like a thermostat needing batteries. I would like Tado to send me a notification, either push-notification in the app, or…
-
Hot water temperature
I would love to be able to see the temperature of water in my hot water tank. Having a connected water tank thermostat should do the trick. This would allow the system to detect usage by seeing a significant drop in temperature as the tank refills with cold. Which in turn would determine a pattern of use and possibly how…
-
Alternative Schedule (for working from home as an example)
I've been using Tado successfully for several years, across houses and love it. I've got a 2 Thermostats, 9 TRVs and an extension unit for my hot water cylinder. Obviously I have a long embedded schedule setup and working well for my current house. I've recently updated it with the second Thermostat powering an external…
-
types of user, limits to app, maximum temperatures - increased efficiency and security
Hi, I have had a Tado system for years and would like to suggest the following app and thermostat features: 1) User levels in the app Guest / User - geofencing only Child - As guest + can use the app to manually adjust permitted thermostats within limits. Member - As guest & child + can adjust schedules for permitted…
-
Outdoor sensor
outdoor sensor to track the outside temperature/humidity to help improve the weather adaptation
-
Graph showing global boiler activity
I don’t think this exists, or I cannot find it. I’d love to be able to see the pattern of when my boiler is active globally rather than when each room is calling for heat.