-
Auto valve calibration
I've occasionally noticed radiators getting warm when they should be off due to the valve needing recalibration. It would be useful if the valves periodically auto callibrated (which would also serve as an anti-seize function) or could auto detect if they temp was unexpectedly rising and trigger a calibration.
-
Need a meter for hours heating was on
Living in a block of 8 flats, we all tap on central petrol heating. We get charged by the hours we have heating on. No information In the daily room graph (have only one thermostat) there is no indication of the time heating was actually on, from start of month / from start of day till present. Is something so obviously…
-
Tado as a trigger for routines in Alexa
Hi, I would like to use tado as a trigger for routines in Alexa. My request is similar to what you’ve done in ifttt but this time for Amazon Alexa. Use away/home mode as a trigger for alexa routines. I consider this feature mixed with autoassist geofencing very powerful for routilnes like: Automatically activating my Home…
-
Hot water schedule
Dear New Ideas Team, I operate a Tado system which incorporates a two channel receiver for separate hot water control. I'm really pleased with the Tado and it works far better than a previous smart control system I had. There is one feature I think would improve things for customers with a hot water tank however. I…
-
Clock on Smart AC display
Since Smart AC has external power supply, it would be awesome if it could display time with very faded light (or could light intensity adjusted).
-
Allow reduction of maximum temperature
Some in my household can't be convinced that manually setting the heating to 25degrees doesn't speed up the heating. I want to be able set the maximum at 22degrees, so it doesn't get set to 25 and forgotten about.
-
Improve the Alexa interface
I've just typed out a long and eloquent post on this matter and it lost it,even though it said it was posted. And yes, I know this post isn't saying anything.
-
Tado-Bridge for Fast Internet-Router
The Tado-Bridge doesn’t work with the swiss salt-router with 1gbit/s port. The tado-bridge just work with a slow port transfare.so i have to use an switch-port to 100mbit/s: https://www.conrad.ch/de/p/renkforce-rf-4279924-netzwerk-switch-3-port-100-mbit-s-usb-stromversorgung-2139962.html…
-
Alexa needs improving (Post attempt 2)
Here's a second attempt at the long suggestion I posted earlier, which was lost, even though it said it was posted. This one will be shorter. So, the Alexa interface needs to be improved. Scenario 1: If I turn off a thermostat "Alexa, turn of hallway thermostat". I can't just say "Set hallway temperature to 21 degrees". I…
-
Whole system quick boost
Would it be possible to switch on all radiators (or a selection) to a preselected temperature, instead of having to adjust the smart schedule for each? This would be useful if you have guests arriving or just want a quick heat boost throughout the house.
-
Please increase the number of rows supported to 12 (or more)
In my home, which is not exactly a mansion, I have 11 separate 'rooms' each of which needs separate temperature control (each has its own heating source - a radiator - controlled by two). Unfortunately Tado only allows a maximium of 10 rooms currently and so I have had to combine two rooms into one 'composite room' with a…
-
TRVs able to request heat from a zone controller in order that valves open
In scenarios like mine where a house has separate zones with valves (i.e. upstairs and downstairs) currently TRVs are effectively slaves to the zone controller thermostat which opens the valves. This means that the zone controller thermostat has to be calling for heat in order for any TRVs to work. The ideal would be that…
-
Tado Smart Schedule in memory feature request
This morning I lost my WiFiconnection so I was unable to operate the Tado via web an mobile app. which is completely understandable. I woke up with no hot water or heating. I had set the Smart schedules when I installed the system. I did come across this website which says you can still operate the Tado via the device…
-
Tado, please change schedule screen to vertical, like hive app:
I have change from hive to Tado for the beautiful hardware, but the hive app/schedules are an example to copy. All week visible and editable in one screen! If you click the black dot with three little white sign, you can copy and paste the visible schedule to all weekly days or a particular day of you choose. This with…
-
Smart A/C auto function
Smart AC works great apart from one major feature. Setting the A/C to Auto, so during Spring/Autumn where the temperature might need to be either warm or cool depending on the weather that day. Like universal tv remotes that you programme by pointing the IR signal and recording it, why doesnt Tado support this function? It…
-
TADO Thermostat should have option to use 12V supply
I am replacing thermostats in my existing heating arrangement with TADO thermostats. Not uncommonly my UFH and heating is controlled by a Wiring Centre which supplies power to all my thermostats. This happens to be 12V DC. I am surprised to learn that the TADO relies on a battery to power it and connect be connected to the…
-
A link to new feature releases
Could you add an Updates link where you can see all the recent and previous feature updates you’ve made. Use case: I just opened up the app and saw the ‘child lock’ feature you added, but stupidly, I hit ‘skip’ and now can’t find an (easy) way of finding it again.
-
Heating overdrive
Why does Rafi continue to heat so long after it reaches the desired temperature, ive had it set to 21° but the heating didn't stop until 22° and my house got to 23° 🤒 any suggestions?
-
Calibrate radiators with room thermostat
I have 5 rooms setup with smart radiator thermostats but only need one wireless thermostat for my main living area. It would be great it I could calibrate my other rooms by placing the room thermostat in each room for ‘x’ amount of time to automatically set the temperature offset.
-
Android widget with home overview
I would like a widget where to quickly glimpse the home state: Home/Away Temperature/Humidity/Open Window for several (selected) rooms Does anybody else feel this would b e a nice addition?
-
Eliminate community signup process when user registered on app.
If a user has the tado app and is signed up / registered for Tado. Then submitting Suggestions should not require setting up another account. See tools like TabsFolders where submitting a suggestion / bug report takes 2 clicks after initial signup.
-
Show heater temperature information when heating (+ control parameters)
Currently, using OpenTherm, Tado can ramp up the heater temperature very quickly. Sometimes even reaching 80 degrees. It would be great if a tile in the app can show the temperature of the water in the heating system. It is indicated on the heater itself and also on my previous thermostat. Offering this in a graph showing…
-
Data Logging Overlay
It would be great if I could overlay all the temp / humid readings I have on my system on a single display rather than having to keep switching between each device.
-
Newest Huawei Phones without Google Play Services not working on Tado
I have previously had a Huawei phone which worked fine with our Tado system. Having now bought a new Huawei phone it does not. I am aware of the politics, but it does seem strange that Tado have decided not to produce an App that works with the worlds 3rd most popular mobile phone brand. I was told rather bluntly that your…
-
Stronger TRV mounts
My Tado TRVs have only been installed 6 or 7 months but I’ve just found one of them has come off because the plastic lug that locks the mount to the body has cracked and is broken. It strikes me that the plastic part of the mount is a weak point in the design and appears to be the one bit that, if broken, prevents the…
-
An ‘On’ function for the Smart Radiator Thermostats
As well as having the off function, and each individual temperature setting, it would be good to have an on function (like a standard TRV). This way it won’t instruct my boiler to turn on but just receive heat if it is already servicing another radiator.
-
TADO to distribute service engineers
Please consider travel service engineers who understand TADO to visit customers with TADO heating. Encouraging appointment home bookings to solve problems. Web Chat not always the best for communication.
-
TADO INFORMATION UPDATES
For those interested in Tado I believe that it would be good to be able to subscribe to ad-hoc email updates on things Tado related that Tado are open to share with their customers - whether that be firmware updates, hardware updates, press releases or collaborations with other companies etc. If there is such an option or…
-
Open window notification after shutoff interval
As it is (if you pay for auto-assist), the system automatically shuts down heating for a pre-configured interval when an open window is detected. I think it would be useful to receive a push notification when that interval has elapsed, in order not to forget to close the window.
-
Support one decimal place (0.1) for radiator valve temperatures in the Tado app
These devices appear to report their temperature at 1 decimal place of accuracy (I see it via the API in my Home Assistant integration) yet the Tado app only shows their temperature as integers. Can you please change this? I recognise this might be difficult on the device display itself but not in the app. I'd also like to…