-
Heating Activity - Real Time
Hello, Whilst "Heating Activity" is good at showing which zone/room is currently heating, what is not in anywhere near real time is the Total Today value. It will sometimes take hours before the Total Today time changes when I know the heating has been on for more than the total of 11 minutes it has kept telling me.. I may…
-
Smaller increments for radiator thermostats
Hi, I run a couple of thermostats on my district heating system. The water temperature to the radiators is controlled by a PI-regulator, that does a good job. However, the Tado thermostats seems in daily operation to make quite dramatic changes to the waterflow through them, which means I see dramatic water temperarure…
-
Night mode for wireless receiver (no lights)
We have installed the wireless receiver in our son's room replacing the previous controller that was placed there. Everything works fine but at night the lights are like so: We need a blackout room for our son to sleep (he is nearly 2 years old) and these lights unfortunately keep him awake. A feature I would like is to be…
-
Temperature cap by room
Can we please have the ability to set a cap on target temperatures by room on the app
-
Support for Matter standards to allow full interop across Smart Home systems
Full support and integration with the Matter standards https://buildwithmatter.com as the standards develop and get published - ideally without having to upgrade the hub, etc.
-
Leave the valves opened in 1, 2 or 3 gears
Nowadays we can close the valve (OFF) or open it fully (25º), and the control is based only in the temperature that the valve is measuring. The thing is that in my area where it below 0º at night, the valve is constantly opening and closing, with the noise of the small engine attached. To avoid this noise, the idea is to…
-
Pouvoir changer la température hors gel
Bonjour, J'aimerai pouvoir changer la température hors gel par défaut pour pouvoir éteindre mon installation simplement quand je quitte ma maison de campagne pour quelques jours plutôt que de devoir utiliser le sélecteur vertical de température qui m'oblige à changer également jusqu'à quand ce changement de température…
-
Mehrere zuhause pro Account
Bitte bitte bitte, ich warte seit Jahren darauf, dass ich endlich mehrere Tados in einem Account nutzen kann. Mir
-
Electric Radiator Element
There are Wifi controlled elements for electric radiators on the market so assume this is not an impossible request. However, it would be great for Tado to offer this option to link in with the main app (like the AC controls) which can offer heating to areas of a property where no wet heating system is installed. it would…
-
weekly activating of the valves during the sommer periode
Hi. Older heating systems have problems with the valves getting stuck when the heating period starts. This means that I have to dismantle all the Tado thermostats and exercise the valves so that they can work again. It would be an idea, however, if Tado once a week "turns on and off" the thermostats, so that the valves…
-
Have an option to dim or extinguish the lights on the wireless receiver.
The LED lights on the wireless receiver are very bright in a dark room, e.g. a bedroom at night. It would be a useful feature to be able to dim or extinguish the lights on the wireless receiver.
-
child proof fixation of the radiator thermostat
The radiotor thermostat comes loose way to easy. My 14 months old kid had it loose in no time. What is the point of having a child protection mode in the software, if the hardware is not child proof.
-
Airco and heating syncronisation
It would be great if Tado airco and standard Tado heating controls could synchronise in the same room so that heating doesn’t try to heat when airco is cooling. This seems like an obvious feature, but apparently they are two totally different systems in the app. This is a shame as in many cases in Europe the heating is…
-
Use one thermostat to override all system
Hi, It would be good to set one ST or TRV or whatever that when overriding the programmed schedule through its interface (not from the app), it will override the whole system to the specified temperature.
-
Intervals dans progamming
HI, I think we should be able to get interval from monday to thursday for we not need to program every day individually. Because weekend begins when we finísh our worktime and we change our habits
-
Lowest sepoint temp is 16 degrees
On my Mitsubishi AC can i set the setpoint as low as 5 degrees. In Tado app the lowest setpoint is 16 degrees. Make it possible to have lower setpoint in Tado then 16 degrees!
-
Multiple internet bridge's
Hello, I'm having trouble with keeping all my devices connected to the internet bridge. I was thinking why can't tado software team roll out an update so you can have 2 or more internet bridge's on the same network at different places in the house to expand your coverage.
-
Directly select room on the Graph page, without navigating away
Please could a drop down to select each room be included on the graph screen in the App? This would allow quicker comparison of how different rooms have behaved, without having to navigate away to a different room and then selecting the charts again and again. I find the graphs of each room very useful, but find it…
-
Greenstar 8000 EMS compatibility
Please develop EMS compatibility with Worcester Bosch Greenstar 8000 range to permit proper modulation control.
-
Assign more than 10 spaces to the zone controller
Our house has 14 rooms, 20 smart radiator thermostats and one smart thermostat. We want to be able to set the temperature individually in all 14 rooms. Can Tado adjust the zone controller so that we can, say, control 15 rooms instead of just 10? I suspect it's an setting somewhere, which should be adaptable, right?…
-
Meer dan 10 ruimtes aansluiten op de zoneregelaar
Ons huis heeft 14 ruimtes, 20 slimme radiatorknoppen en één slimme thermostaat. We willen in alle 14 ruimtes de temperatuur individueel kunnen instellen. Kan Tado de zoneregelaar zo aanpassen dat we, zeg, 15 ruimtes kunnen besturen in plaats van slechts 10? Ik vermoed dat het ergens een instelling is. Die toch moeten…
-
Activity log viewer
Hi have read your summary of missing / development requests. Is there any movement on these. I am frustrated that there is no way of viewing the log activity for room temperature, boiler control, manual interference, who did what and when. There are spurious times when the heating or water comes on and I don’t know why. A…
-
Ability to use AC thermostat as a sensor to radiator valves
I have an AC thermostat and a radiator with tadoº valve in the same room. Cant' understand why can't we use the AC thermostat as a sensor for the heating radiator. Should not have to buy an extra sensor for the room temperature. The AC thermostat already does that.
-
Time for Matter
Being able to interconnect with other devices, sometimes produced by multiple vendors in a smart house matters(pun intended), especially when the internet goes down. A smart home is a sum of all its smart devices. Currently tado is one of the multiple weakest links at least in my home. For tado to “matter” in our future…
-
2 function Programs
Hello Regarding the application, I would come up with a suggestion that could come to the aid of tado thermostat users who use control panels for actuators, for the boiler but also for the mixing groups. I propose to introduce two settings in the application regarding the use of thermostats: 1. for radiators - this should…
-
Add dates and times when not home
It’d be great to have an option to add future dates and times when you know you’ll be leaving home in the morning, so that the system doesn’t start heating full on. Since that’s not the same everyday, it’s hard to get this into a standard schedule.
-
Away until
When I say I'm going away, it would be helpful if it let me say until... Eg I'm away - but I'll be back 2pm on Tuesday 7th. It might pop up or email me 24 hours before and let me change that prediction I would then return home to a warm home with maximum energy reduction - not one that started heating when I got within a…
-
Schedule profiles
I have now had the tado system for nearly a week, and its certainly better than my old hive system. You guys have done a good job on it. However you (and every competitor) are missing what I believe is probably an important feature for many people, and I can say 100% would have made me choose to move to you years ago had…
-
EnergyIQ: Reminder Notification Preferences
Hi, Hopefully not the biggest amount of work for this one: It would be nice to be able to define “when” you want to get notified from Tado to submit an energy reading. For weekly notifications it could be specifying a day of week, for monthly a day of month, for quarterly or yearly selecting an initial date that…
-
Internet Bridge with PoE
Would love to see the Tado Internet Bridge with Power over Ethernet. This could save us an additional cable because everything can be done with the Ethernet cable. Since the raspberry pi and many other similar devices can do it, this should be an easy task for Tado.