-
Tado tiles a waste of an oppitunity
I am a new comer to Tado and the biggest disappointment is the app, the tiles on the Home section is an utter shambles, I find it really stupid having to go into a tile to view the inside temp, humidity and heat request (the 3 little squiggles) and the fact that no icon with in the tiles show if the radiator is receiving…
-
Configurable Boost Timer
Feature request: to be able to set how long the boost heating button should last for as 30 mins can be quite shotr especially if you’ve been away and are heading home outside of set heating hours.
-
Low/High humidity notifications
Would be great for Tado app to send a notification when a room has low or high Humidity, with the ability to set the level that the notification can be triggered.
-
App : dark mode
Do you plan to provide a dark mode compatible app ? When ? Thank you for my eyes.
-
Options to Limit Early Start
I like the idea of 'early start' and in general I think it works well. However, first thing in the morning there is a limit to how early I want the heating to come on, even if it doesn't get up to temperature in time (e.g. very cold mornings). This is because: - I would rather just live with it being a bit colder than…
-
Manual Open window detection button
Hi, I really do miss a button to cut off the heat when I open windows. It doesn’t always detect it, and it can be useful in these spring days just to open the windows. If it detects the open window, heat will start automatically after the set time, but that could be useful not to do. Too much work to take each thermostat…
-
Dedicated tile for boiler status on/off (same as hot water)
Im fairly new to Tado but one feature i've seen that is so blindly obvious i though i was doing something wrong. It would be great to have a tile on the app which shows if the wireless recevier is actively calling for heat. Similar to the "hot water on/off" tile. A boiler on/off tile. I know there are the ~~~ wavey lines…
-
Add Boiler Flow Rate temp to heating graph
Keep a record of the boiler flow rate temp on the heating graph
-
Thermostat Display Always on
The Display of the Smart Thermostat is only visible when Push button. My former Thermostat was a 'Toon" and we used to look at time and temp when ever in the room. The New Tado does have a fancy look, but I would like to havethe display to be always on (and if possibel off during night-time/when not home). So maybe it can…
-
Visualize heating requests of all rooms in 1 graph
In the app I can see the temperature and heating request of a room. I would like to see the heating request of each room in a single graph, preferably over multiple days. I made the graph below using the API in just a few hours, and I think Tado should add such a graph to the app as well.
-
Mac M1 App
Bring the iOS Tado app to the Mac AppStore to use the features in which HomeKit doesn't support (Ie. Override Timer, energy reports, timer settings). When we had access to run these apps pre MacOS 14.2 or 14.3 tado was one of the best apps to use via MacOS for M1 devices which saved me from hunting down my iOS device. It…
-
Oil Tank level monitor
Would it be possible to develop a Tado compatible heating oil tank level monitor?
-
Boost individual room
The option to boost an individual room rather than whole house heating sometimes the upstairs is cooler the down stairs and would be good to be able to boost individual room but just now need to boost he house.
-
Access to tenants
To allow tenants to use the system, I have to currently give them full access including administrator privileges. Please introduce a feature whereby users can be added that can use the system and control heating without having administrator authority. Thanks
-
°tado in the summer months
I am very happy with the smart radiator thermostats. But it’s a pity that they don’t unlock their full potential in summer months. On hot days, most people leave the windows closed during the day so that the apartment does not heat up unnecessarily. How convenient would it be to receive a push message in the evening as…
-
app functionality when internet connection is disrupted
If for whatever reason my internet connection stops working and I am at home, I would still like to be able to use the app to control your heating and/or hot water.
-
More Settings options for AC
Current AC v3 owner... satisfied with the overall experience. As others have said, display could be showing lots more. Controls could be a little easier/more intuitive and Humidity could be visible to the Home app as a tile. Ideally, the device could be receiving the "dumb" remote signals to update its status as well. But…
-
Schedule change for all rooms
It would be great if you could set a schedule for all rooms at once rather than having to change them all individually. Is this in the pipeline?
-
Time for Matter
Being able to interconnect with other devices, sometimes produced by multiple vendors in a smart house matters(pun intended), especially when the internet goes down. A smart home is a sum of all its smart devices. Currently tado is one of the multiple weakest links at least in my home. For tado to “matter” in our future…
-
Active/Passive mode for TRV's
Whilst running the TRV's last year I noticed a couple of issues. 1 - As each TRV called for heat at slightly different time, the boiler was constantly having to bring water up to temp to heat an individual room 2 - To try and avoid this I was having to set heating much lower in parts of the house increasing the risk of…
-
Temperature monitor or probe for Hot water tank
Please can we add a remote temperature probe for a Hot water tank. Simular to a radiator thermostat. However it will tell the temperature of the Hot water Tank. This could also be used to integrate temperature control for the Hot water and weather to re-heat, turn on the hot water or turn off.
-
Modulation for Worcester Bosch 8000 series
Its now 3 years since Worcester Bosch launched its 8000 series. Can we have modulation compatibility for this series?
-
Window open notification
Window open notification could tweak little bit to show which window is open on quick notification. So user doesn’t have to open app always. or an announcement system [ smart speaker] if a window open
-
Option to enter two offset values on TRVs
One offset for when radiator is off, and one when radiator is on. This would hopefully be a simple fix for the issue where the temperature around the radiator is warmer than rest of the room when the radiator is on. (Seen especially in vertically mounted TRVs.)
-
Outdoor thermometer
Would be good to see outdoor temperatures on home screen, possibly linked to turn on heating if temperatures drop
-
tell tado a window is open
The radiator thermostat does not always recognise when a window is open. I would like a way within the app to tell tado this, so that it doesn't try to keep heating the room - I currently have to turn down the tempt setting to around the outside air temp.
-
Smart AC Control - vane and swing control
The tado Smart AC Control is great - except for one thing. My aircon units have the ability to vane both left/right and up/down, and the traditional remote will control these. The AC Control does not, which means that at night, the air blows directly in our face and we cannot direct it to vane or point in a different…
-
Cooling function for Heat Pumps with floor cooling
Please create a function where we can use Tado with a heat pump (equipped with a cooling function) connected to a floor heating system to cool the rooms (with Tado thermostat) to the specified temperature. Each room is equipped with Wireless Smart Thermostat or Wireless Temperature Sensor. The heat pump is connected to the…
-
Multiple Internet Bridges - and long standing bug bear... a new idea / approach.
We have major issues with range from the internet bridge, as there can only be one. Clearly it would be simple to slip a simple SSL IPSEC tunnel into the bridge architecture and make changes in the cloud to allow multiple ones on a single account. But this is not clearly the case. Equally being a powered unit, you might…
-
Multi-Home Tado
Would be so great to have multi home support in the app. Such a pain having to log in and out all the time. If this is complex - and I realise that not everyone needs it - how about releasing "copies" of the App so we can download 2 or 3 of them and have them logged in individually. This may apply well to everyone. I want…