-
"feels like" temperature setting
21c feels quite different depending on the humidity in the room It would be great if the trv would adjust accordingly, depending on the humidity.
-
Open Window Detection Accuracy
Hello, I have recently bought tado x and was disappointed by the open window detection. There should be a manual button to say that the window is opened it shouldn't rely only on fixed changes of Humidity and Temperature ( Some spaces takes more time to lower the humidity and doesn't detect the window is opened) when…
-
Merged: Multiple homes
This discussion has been merged.
-
More than one PV array
Hi, The ability to add your Solar Array details to your Tado Balance system was launched a few days ago. Sadly, it doesn't give any way to add more than one array, and I assume most of us have solar panels on more than one area. In my case it's South-West, North-Eas and South East with different angles and numbers of…
-
Internet Bridge local API
It’d be great if it were possible to interact with the Internet Bridge using a local API so that requests don’t need to be made via the internet. Presumably there’s some kind of http server on the device as HomeKit is able to communicate with it locally?
-
Back gesture in app
Navigation in the app would be hugely improved by enabling the normal swipe gesture to go back (on iOS, but probably the same on Android). The software back button is at the top left of the screen which I find awkward to tap.
-
Merged: Radiator Thermostat in Black
This discussion has been merged.
-
Co-ordinated Early Start
Early start is a fine idea to take some of the guesswork out of when your heating should come on each day. However, for condensing boilers and multi-zoned Tado setups, there's an efficiency issue, especially when setup with modulating/bus connection to the boiler. Specifically, even rooms with the same 'start' time, early…
-
Heat Pump Optimizer - hot water heating only once a day during cheapest hour
My hot water boiler usually only needs to be heated once a day, thanks to its good insulation. However, the current hot water optimizer heats the water during a set period, which isn’t always efficient. Although you can adjust the heating duration, it might not align with the cheapest energy hour if it’s preset in the…
-
Which Room is Requesting Heat
Tado is full of so many great functions it's hard to debug your setup when fine tuning your settings. It would ge great to see a page that shows which rooms (that are assigned to the boiler) are actually requesting heat - knowing what the system is doing and not assuming what is occurring. This would support my efforts in…
-
Air Conditioning control based on dynamic energy price
Hello. For heating my home I use 3 Air Conditioning units in heat pump mode. I will soon move to a dynamic energy contract, where the costs of electricity varies per hour, depending on the energy market price. It would be very helpful to have TADO assistant adjusting the heating depending on the energy price, so that when…
-
Merged: Option to set thermostat valve always open
This discussion has been merged.
-
Merged: Weekly motions
This discussion has been merged.
-
Battery last changed
Hi - Please can you add a feature which records when the battery was last changed? Thanks
-
Connessione da rete mobile 4G/5G
Ciao, chiedo se sia possibile poter modificare il firmware/software del Tado in modo da farlo funzionare anche da rete mobile, visto che funziona solo da rete Wi-Fi.
-
More detailed information I graph 📊
Hi. I wish I could get valve opening in %, in the graph, the 3 heating symbols is not very useful I think. I can see the actual valve opening in % under the care menu, but I can only see it live and not historical data. It will be great if the graph could show opening % :-)
-
Quality issues
The display on my Smart Thermostat has failed after only 3 years. As its out of warranty Tado won't replace it. Having to replace one of the main components of the system every 3 years will make the system very expensive. Extremely disappointed by the Customer Service received from Tado and the quality of their hardware,…
-
Improved status and viewing
I know Tado can look at the background information on which device called for heat. Is there a way that a general log can be created and viewed in the Tado app. So if one room calls from heat and it's shown on a log, if another room detects window open, it still reports on the same log in a time order. Same goes for any…
-
External thermometer for tado.
Do taxi make an external thermometer that links in wth the tado app? If they do, I can't find one. It would be very useful if I could remotely monitor the outside temperature as well as the inside temp.
-
Black radiatorknob
I would like a Black radiatorknob on my Black bathroomradiator. I think it is strenge that is not available when a Black radiator is very common these days.
-
Create groups and group schedules
Hi. Previous house had a Hive thermostat and one of the great things was to be able to set a vacation period. You would set an away time and date and temperature and a return time and date. For example you might set all devices to 14C for the week you are away and it returns them to the programmed schedule at the time/date…
-
Software development roadmap
The "Suggestions, Ideas, and Improvements" forum has been here for years, brimming with diverse topics and innovative suggestions from our users. However, one question lingers: What if tado° rekindled its commitment to transparency by sharing at least a simple software development roadmap with users? A follow up to a post…
-
Away notifications conditions
Hey Tado product owner, Each time I leave my house in spring and summer, I get a notification if I want to switch to away mode.. which is great at winter! But if all of my tado are anyway turned completely off, it’s just annoying and would cause me to turn off the notifications from the app. How about to recognise when all…
-
Un termostato utilizzabile sia come riscaldamento che come raffrescamento, come accensione per PDC
Buongiorno, sarebbe utile realizzare un termostato che permetta la gestione sia del riscaldamento che del raffrescamento. Sempre con contatti puliti COM e NO. In modo che, in base alla stagione lui permetta di avere range temperatura da 5 a 25 per riscaldamento e da 16 a 30 per raffrescamento. Sarebbe utile semplicemente…
-
Daikin Heat Pump Compatibility
I am looking for a smart home heating solution and contacted support to assess compatibility for Tado X which states it accommodates under floor systems. Support informed me that Tado X is not compatible with Daikin Altherma R F - EHVH-CB and Daikin ERLQ006CAV3. I would suggest adding compatibility as this is a widely…
-
Tado X suggestions
(I originally messaged this direct to Tado but they asked me to repost it here.) I have read that currently your Tado X heat pump controller supports only some makes of ASHP as of yet but based on customer requests you will add more. I am therefore contacting you to suggest both Samsung Mono HT Quiet, and Daikin Altherma 3…
-
Heating
Todo app is telling me I’m useing more than I am
-
Make On/Off Controls Available on Home Screen
It would be more convenient if each tile included a basic on/off control to save you having to go into a new screen first. You already display a 'power' icon in the top right of each tile - see attach - make this live so that clicking it actually works. See Tapo smart device app for example where this is already supported
-
Google Home Integration for On/Off Hot Water
I have a fairly old boiler with no digital temp control. Tado supports simply turning the hot water on or off. Google Home shows a entry for the hot water but does not allow me to change its state. Tado support told me: "You have the Hot Water tile enabled in your tado° app. However it is a relay ON/OFF control and you can…
-
Introducing myself
As suggested by @samd, I am making a short post to introduce myself as the community forum’s new admin. Hello! My name is Emcee, I live in Munich, Germany and am a member of tado°’s Customer Experience team. I hold a M.Sc. from the Technical University of Munich. My thesis was focused on hydroelectricity. I worked in the…