-
Change the hysteresis / PID settings
Hi Tado. The current desire of the smart thermometer algorithm to track the set temperature is killing my hardware. It is turning it on/off so often that things are breaking (like TCVs). How about I can select the min and max settings that trigger a state change? Or if it is a PID system, I should be able to change the…
-
Lowering frost protection or turn it off per device
I have a conservatory attached to the property and the temperature can go down as low as 3 or 4°. A useful feature to be able disable frost protection for this area or choose a lower level for frost protection, such as zero.
-
Some Suggestions
Tadoº Ecosystem Ability to use AC thermostat as a sensor to give temperature readings to radiator valves or the radiator thermostats (this is a big turn down). On the App (iOS) System: Ability to add shortcuts to iOS system, allowing to activate Boost Heating, Resume Schedule, Turn Off All, more easily. Geofencing: ability…
-
Timed override for geofencing
Would be good to have a way to override geofencing (to home or away, from auto) for a set period of time - like the timed manual override for TRVs. I manually override geofencing to ‘Home’ so that heating stays on for babysitters when I leave the house. But then I have to remember to turn back to “Auto” when I get home.…
-
Maximum Temperature Limit
Hi there, with the increasing cost of fuel , I was thinking that a maximum temperature limit may be of some use that could be set by the account holder in order to prevent "temperature tampering" by anyone not authorised. This could possibly be built into the app, and hopefully could save money. Any thoughts !
-
Visitors pre-set
It's probably been suggested before but I'd love a preset for certain rooms so you can quickly switch between occupied and unoccupied. For example we have 2 X guest bedrooms. When visitors come it would be really helpful to have a preset to quickly switch the heating schedule on just for their rooms. When unoccupied we…
-
show humidity on room tile
Why do I have to go into a room to see the humidity? There’s enough space on each room tile to add the humidity figure.
-
Display Humidity level on wired and wireless sensor display
It would be important to allow the display of humidity levels on the wired and wireless sensors (square devices) when pressing the round button. This feature could be configured in the app. The humidity level would be displayed just after the temperature. You can also extend this display to smart radiator valves.
-
Support newer version of Worcester HT-BUS
I just upgraded from a worcester bosch greenstar cdi to a worcester bosch greenstar 8000 life. On my old boiler I could connect to the digital low voltage interface bus however the new boiler the ht-bus is not supported and I couldn't simply change over I had to rewire to the old relay style. The bus interface is better…
-
Plieger
Goedemiddag, Wil toch even reageren op onderstaande mail van jullie. Misschien dat jullie er iets mee kunnen?! Ik heb een Herz adapter M30 inwendig naar M28 uitwendig gekocht waar een messing sukje bij zat wat over de pen van de kraan past. Ik heb enkel het messing stukje op de en gezet en….. tadaaa, de Tado knop werkt.…
-
Heating Manual Adjustment Notification
We have multiple people in the house and it would be handy to receive a notification when the heating is manually adjusted from the schedule.
-
Battery Monitor Improvements
As a suggestion, there needs to be better battery level monitoring\reporting between the Tado application and devices. I have noticed in recent weeks that devices are reporting battery levels as "Good" but then are malfunctioning due to suspected low battery life, which is then confirmed when you re-insert the batteries…
-
App Ideas - 'call for heat' alignment
Issue: my heating is on a lot through the day. I'd like better visibility of when the boiler has been triggered (called for heat) and by what. And better control so I can (or the system automatically will) try to align devices calling for heat (so perhaps 3 devices call for heat together for an hour, then all go off for an…
-
Alert
It would be good if there was a log file so that you could find out which window alerted "open window"
-
A Hot Water Boost button in the app
There is no option in the Tado app AT ALL to switch your hot water (only) on for a predetermined time - e.g. 30 or 60 mins. SO many times I've needed extra hot water, outside of the my usual / programmed schedule and at irregular / varying times of day, so I've put the hot water on manually and then forgotten and it's been…
-
Community Support..
Because there seems to be no input from Tado in this community support why don't they follow Sky's model whereby there are superusers that can elevate some queries to Tado directly for online support vie a chat process. Seems to work ok for them and would greatly reduce the frustration some do have with no input from Tado…
-
Tado energie-zuinig?
Tado presenteert zich als de oplossing voor teveel energieverbruik. Alleen de temperaturen die jullie adviseren (de voor-ingestelde temperaturen, maar ook die geadviseerde temperatuur in de tab klimaatcomfort), zijn hoger dan de in nederland geadviseerde 19 graden. Lijkt mij niet erg energie-zuinig. Als bv mijn woonkamer…
-
Manual adjust graph axis
I would like to be able to adjust the axis of the temperature graphs in the Tado app. Currently this goes automatically hence graph axes jump every day and is different for each room. That makes it difficult to compare different days or rooms and makes it difficult to observe how quickly a room heats up or cools down. I…
-
Raam open
Ik wil zelf kunnen aangeven dat de raam open staat. Hij detecteert niet dat het open staat. Als ik zelf opgeef dan wil ik ook tijdsduur meegeven voor hoelang ik denk dat het raam nog openstaat
-
Schema - zomer / winter
Wanneer het winter wordt, wil ik overschakelen van een “zomer” schema naar “winter” schema ipv alles moeten aanpassen
-
Low/High humidity notifications
Would be great for Tado app to send a notification when a room has low or high Humidity, with the ability to set the level that the notification can be triggered.
-
Switching on/off based on humidity
Hello, It would be grate if we could have a function in the app where one can choose to switch on or off based on humidity. For example: if humidity reaches 60% switch on to 23C till humidity is lower then 60% or another value
-
Humidity trigger
I think it would be nice to have a humidity trigger as well as temperature trigger. As an example I have a TRV in the basement where the desired humidity is btw 60-70 and the temperature is not really important. It would be great if the TRV kicks in when the humidity is as an example above 70
-
Comfort setting rather than temperature
As an option, why do we need to set a temperature at all? Why don't we set air comfort instead. I really couldn't care what the temperature is per room, the figure is irrelevant to me, I just want it to be "pleasant" in each room. Given the temperature to achieve "pleasant" can change depending on humidity etc it would be…
-
Extend open window time
Is it possibile to extend or to modify the open window time? So when you are doing the spring cleaning or leaving the window open due fry smell (in the kitchen) leaving longer then 15 minutes? And having a smooth warm up after the windows are closes
-
Worcester Bosch Greenstar 8000 and EMS
Please can you configure the Tado wired unit to work with the Worcester Bosch Greenstar 8000 and EMS
-
Heat transfer profiles to choose from
My old Honeywell thermostat had 4 profiles I could choose from. Each profile represented a different type of heat transfer speed. For example, hot air heating is a quick heating method. Convector heating a slower one. Both have their cons and pros. What currently happens is that when you use the Tado thermostat for hot…
-
Cylinder, stat
Hi does anyone know if there will be a Tado cylinder stat in development?
-
Diffret status for thermostats that are not linked to a zone
In order to stop a room calling for heat and switching on the boiler (like a toilet, closet etc) you can remove the zone controller for the room. It would be good to acknoladge this on the tile in the app.. currently regardless of the zone set for the room it will say "heating to" i think the rooms that are assigned a zone…
-
Date scheduling
Hi, it will be a great opportunity to be able to schedule from starting date and end date, please. The away option is not an option I like to use because off security. What will happen if some one hack my Tado account, and they have full information that I am away. So please add the option to scheduling from starting date…