-
Directly select room on the Graph page, without navigating away
Please could a drop down to select each room be included on the graph screen in the App? This would allow quicker comparison of how different rooms have behaved, without having to navigate away to a different room and then selecting the charts again and again. I find the graphs of each room very useful, but find it…
-
AM/PM & 24h time format
Please make 24h time format available, either based on system (phone) settings or by choice in the application. AM/PM doesn't stick in my head.
-
Smart AC control to activate AC based on room temperature
Currently the Smart AC control turns on the AC unit at the start of a time block, regardless of the temperature. In my opinion that's a major flaw, because most (all?) home AC units still run their fan even if the room temperature is below the setpoint, so it's a waste of energy and also annoying to have the fan blowing…
-
3rd party temperature sensors
It would be a great improvement if one could have the ability to use a temperature sensor already in the room (which is i.e., HomeKit compatible) to control the radiator valves. This will give a much more accurate temperature control in each room. If you already have a temperature sensor in the room used for another…
-
Make use of OpenTherm data
If the tado is connected to the boiler via OpenTherm, could we make use of the data, ie in the graphs where it shows the boiler activity (the 3 vert heat bars, and colour code), could we also show the boiler temp that was set at the time?
-
Lock for smart thermostat
Hi, Not sure if this has been suggested in the past, however a lock of the smart thermostat for me would be a great idea. I have one in my living room, and my daughter is constantly fiddling with it. On top of this, my sister in law is constantly blasting thw heating up to max when thete is no need. Being able to lock and…
-
Heating Activity - Total Heating Time is wrong
If a room that is not assigned to a zone controller is the only room 'on', then Care & Protect counts this as Heating Activity even though the boiler is off. This is incorrect, and means the Heating Activity is inaccurate if there are any independent rooms set up. Please change Heating Activity to only include time when…
-
Open Window Reminder Notification
How often do you forget to close a window? It happens constantly to me that I open a window and totally forget about it. Tado of course detects the open window and pauses heating for 15 minutes. But after the timer expires, Tado resumes heating despite the window still being open. Therefore, I would suggest to add a…
-
Increase Zone Controller Room Limit
Backstory: I have reached my limit for number of rooms connected to a single zone controller which currently stands at 10. Trouble is of course the typical UK household only has one thermostat, so when you switch to tado it's only possible to wire in one main controller. For a medium size house (or bigger) there is enough…
-
Reading out Smart Energy Meter
Dear TADO development, Im am trying to make my Eneco TOON redundant and have it replaced by TADO, however what I would miss the most would be the Smart Energy Meter readings (day, week, month, Year) both Power and Gas consumption. This is not a nice to have function if you claim to reduce energy consumption. The saving…
-
In App Firmware Update Notification
It would be good if there was something in the App to suggest a firmware update is being performed on a Tado device. Just spent 30 minutes troubleshooting why all my SRT's were reporting 'No Remote Access' and were not communicating with the Extension Kit. After rebooting the Extension Kit & Internet Bridge it turned out…
-
Thread support for Smart AC Control V3+
Homekit-enabled devices have different communication protocols, each of which has its own caveats. For example, for a device with Wifi support, you need to have a mesh network to cover all your devices at home. Otherwise you will have unstable responses. Furthermore, you are limited to a specific number of connected…
-
REQUEST: Shower / bathroom setting that turns the TRV on when high humidity detected
Many people have mould problems in the shower room / bathroom. That's one reason why they (including me) bought a TADO system - to have better background heating in the bathroom (and in other rooms). The room by room humidity tracking in the TADO app is great, and has helped with resolving dampness and mould in many rooms.…
-
Early start for radiators
I tried early start in normal rooms with radiators and found the early start begins excessively early (like 4 hours!) and was advised this feature can only be used for very slow systems like underfloor heating. Pity it cannot learn over time how long it takes to heat the room, take outside temperature into account, and…
-
Arrange multiple rooms in controllable zones
Ad function to arrange several rooms into ‘zones’, say “top floor” then be able to turn heat ‘on’ or ‘off’
-
Set a Minimum Central Heating Flow Temperature (OpenTherm)
Hi, The main purpose of this post is to try and gain an understanding of whether setting a minimum central heating flow temperature is a feature that other users of this forum would value and like to be developed by Tado as part of their algorithms. Are there any other users out there that have abandoned using the…
-
Merged: Second home problem
This discussion has been merged.
-
Two Factor Authentication on my account please
Hello, In a world where breaches are every day an account to mess with my home Definitely needs 2FA (2 factor authentication). Please make it a priority, it is kind of weird that way less important software companies introduced this a long time ago.
-
Graph scale in 1 degree increments
The graph scale is very odd. It is either in units of three or units of six degrees. This makes it very difficult to work out what temperatures the line is reading when it is between the labeled grid lines. It would be much easier to read if the graph scale was simply in units of one degree with ideally subdivisions of…
-
Black or Anthracite thermostat
Are there any plans to bring out a black or anthracite grey colour for the actual thermostats. I am fitting three anthracite radiators into a new kitchen and would prefer a more suitable colour than white.
-
New gas meter in Energy IQ
In Energy IQ add the possibility to start meter readings back at zero after installation of a new gas meter. At the moment you have to delete your complete history before starting back at zero.
-
Temperature and Humidity Graph
Please return the time stamp on the slider within the graph. I can no longer tell what time the temperature drops or rises occurred.
-
Heating Activity on Home Screen Tile
On the Home Screen, some tiles have additional icons within them. The Hot Water has a dripping tap, the Air Comfort has a wind symbol, rooms that are in Frost Protection have a power on/off symbol. My question: Why can’t “active” rooms also have an icon within the tile to indicate current heating state, by making use of…
-
All thermostats history on one graph
It is very difficult to analyze the operation of the entire heating system. For example, it is difficult to see the effect of a thermostat in one room on the temperature in another. It is also difficult to say how often the heating request is sent because each thermostat sends it independently. It would be very helpful to…
-
When using Turn off all rooms, add ability to resume schedule at selected time and date
I like the turn off all rooms option for when I go away but I would like the ability to be able to resume schedule at a certain time and date so I can set it for when I know I'm returning.
-
Add 0.5 degree granularity to Smart Thermostat manual mode
0.5 degree granularity was recently added to the Smart Radiator Thermostat. I would also like to be able to raise the temperature manually by 0.5 degrees from the Smart Thermostat on my wall, instead of having to open the app.
-
Option for Valve fully Open as max temp is only 25°c
As you can only set temperature to a maximum 25°c, after that can we have a fully open valve option. Yes sometimes some of us want hotter than 25°c
-
Allow users to group together TRVs in different rooms
Hi. The fact that we can use IFTTT, Google Home , and some homeassistant features to do this tells me it cant be that difficult. Most houses in the UK have 2 floors - upstairs and downstairs. Most of us want to heat only the upstairs at night when we are going to be there, and the downstairs in the day. Currently I have…
-
Use 1 decimal degree Celsius precision on Smart Thermostat
While the app allows setting the temperature in 0.1 degree Celsius increments, the Smart Thermostat only supports 1 degree Celsius increments
-
Tado X and home assistants (adding important elements)
I added official integration, but for tado x I see only outsite temp, localization, solar energy (prediction) and tado mode nothing else. I need hetting status, actual temp., sett. temp., humidity , opened window status, etc. For all added thermostats. For version V3+ all info is available in home assistant (google home…