-
Multi home
Bought Tado for my Airbnb, love it - bought a 2nd system for my home only to discover no multi home function. Have since read on this forum, and other places, it’s not available so had to return. C’mon Tado… you are not listening to your customers… it’s a pretty basic - and fundamental - requirement!
-
Black or Anthracite thermostat
Are there any plans to bring out a black or anthracite grey colour for the actual thermostats. I am fitting three anthracite radiators into a new kitchen and would prefer a more suitable colour than white.
-
Temperature and Humidity Graph
Please return the time stamp on the slider within the graph. I can no longer tell what time the temperature drops or rises occurred.
-
Activity log viewer
Hi have read your summary of missing / development requests. Is there any movement on these. I am frustrated that there is no way of viewing the log activity for room temperature, boiler control, manual interference, who did what and when. There are spurious times when the heating or water comes on and I don’t know why. A…
-
Heating Activity on Home Screen Tile
On the Home Screen, some tiles have additional icons within them. The Hot Water has a dripping tap, the Air Comfort has a wind symbol, rooms that are in Frost Protection have a power on/off symbol. My question: Why can’t “active” rooms also have an icon within the tile to indicate current heating state, by making use of…
-
All thermostats history on one graph
It is very difficult to analyze the operation of the entire heating system. For example, it is difficult to see the effect of a thermostat in one room on the temperature in another. It is also difficult to say how often the heating request is sent because each thermostat sends it independently. It would be very helpful to…
-
When using Turn off all rooms, add ability to resume schedule at selected time and date
I like the turn off all rooms option for when I go away but I would like the ability to be able to resume schedule at a certain time and date so I can set it for when I know I'm returning.
-
Add 0.5 degree granularity to Smart Thermostat manual mode
0.5 degree granularity was recently added to the Smart Radiator Thermostat. I would also like to be able to raise the temperature manually by 0.5 degrees from the Smart Thermostat on my wall, instead of having to open the app.
-
Option for Valve fully Open as max temp is only 25°c
As you can only set temperature to a maximum 25°c, after that can we have a fully open valve option. Yes sometimes some of us want hotter than 25°c
-
Allow users to group together TRVs in different rooms
Hi. The fact that we can use IFTTT, Google Home , and some homeassistant features to do this tells me it cant be that difficult. Most houses in the UK have 2 floors - upstairs and downstairs. Most of us want to heat only the upstairs at night when we are going to be there, and the downstairs in the day. Currently I have…
-
Improve Care&Protect boiler fault detection
The problem i encounter is easy to explain. If for example my TADO is programmed to turn my boiler on (be it automatically or manually), and for whatever reason the boiler is either Off or the mains is down, TADO doesn’t inform that the boiler isn’t on. In this second report I have sent, the boiler was resetting itself due…
-
Use 1 decimal degree Celsius precision on Smart Thermostat
While the app allows setting the temperature in 0.1 degree Celsius increments, the Smart Thermostat only supports 1 degree Celsius increments
-
Enable multiple smart schedules
During the week, we have various ways we want to smart schedule our radiators: If we're both in the office, then we don't want the heating on If I'm in the office, then we want the heating on but not in my partner's office If my partner's in the office, then we want the heating on but not in my office If we're both working…
-
Switch off schedule for individual rooms . . .
The current schedule system provides a "switch off all rooms" feature. This is useful but it would be even better if rooms could be switched off individually. At the moment the only way to remove a room from the schedule, without resorting to "switch off all rooms" is to go to each room's schedule and switch off the…
-
Tado to start replying back
My idea is for Tado to start replying back to the community. I am seeing posts from YEARS ago ignored. It's time for this idea to be the top one in the company and Tado to listen to it's loyal customer base.
-
App Ideas - 'call for heat' alignment
Issue: my heating is on a lot through the day. I'd like better visibility of when the boiler has been triggered (called for heat) and by what. And better control so I can (or the system automatically will) try to align devices calling for heat (so perhaps 3 devices call for heat together for an hour, then all go off for an…
-
Redundancy in the event of internet loss of server faults
Currently Tado does not have an effective method of controlling their system locally if the internet goes down or if their is a fault on their servers. Can tado re assess this and provide a way to still use the heating controller locally via a smart phone connected to the same WIFI network as the Tado devices, so that in…
-
Tado Widget
I don't understand why there isn't a widget for the app, to be able to see the situation at a glance would be easier that opening the app every time.
-
Smart AC Control 10° setting
Supporting frost protection in the Smart AC Control commands
-
Better support for Underfloor Heating
Hi, I would like to request better software support for underfloor heating systems in the Wired Thermostats when using relay mode. The modulation used by the Tado Wired Thermostates is not beneficial to my system because it tries to turn the UFH on and off repeatably when NOT calling for "full heat" (i.e. when calling for…
-
App with admin (full) and users accounts (limited)
I would very much appreciate it when you introduce asap the possibility to setup admin (full access) and user (limited access) accounts in the tado app. In fact i was disappointed and amazed that this is not possible at the moment. You don't want all users to have access to all settings.
-
Range Limitation Publicity
This community shows that lots of people are having range problems in larger houses. But nowhere in the product information does it mention that all devices have to be within range of the Bridge and that thick walls will adversely affect the range. I have my Wi-Fi router at one end of the house and my boiler at the other…
-
Set a delay in closing the smart valves after the "OFF" command to the boiler
When the boiler is sent to OFF, by the thermostat or by the intelligent valves, there is always a post-circulation time foreseen by the various manufacturers to allow the disposal of the residual heat. With Tado the thermostatic valves are closed immediately, generating overpressure in the circuit, and forcing you to leave…
-
Temperature alarm
It would be good to be able to set alarm if the real temperature is not following scheduled temperatures. Then we would be able to react. Best regards
-
24 hour clock
The smart schedules are set using the. 24 hour clock. However, the next event for each room uses am/pm. I know I live in the UK with its outdated time but it would be useful for users to select a consistent 24 hour (or am/pm) format.
-
Boost heating until custom temperature is met
Hi, I would like to suggest a custom feature that. Currently when you boost heating it keeps going until the temp hits 25 or is turned off. I suggest you should be able to boost the temperature to a custom defined temp such as 21 or 22 degrees. Many thanks Neil
-
Adjust humidity readings (Humidity offset)
Graag een optie om een offset mee te geven aan de luchtvochtigheid. Zelfde optie zoals bij de temperatuur
-
White text on grey background (Temperature graphs in dark mode)
I'm using general dark mode on my device (Android) With the the latest application update the inside and outside temperature display has been changed from black text to white text (on a light grey background. The text has become unreadable. Can you change that back please ? Edit: additional info, In normal (non dark mode)…
-
Hot water boost via app
There used to be functionality using the app whereby you could boost the hot water for a limited period of time, say 1/2 hr then it would return to schedule. As it now works you can only override the schedule and turn the hot water on. If you then forget to turn it off it will run 24/7, not good at all..
-
Always on display
Please please please make an option to show the current temperature stay always on. Even if it’s on dim - it would be so handy to have this information available at a glance