-
Multiple Wireless Receivers on one Tado account
I think it would be great to have multiple wireless receivers on one Tado account so for people with more than one zone or more than one boiler can have all the devices on one account rather than split them on two different accounts!
-
Quiet fan mode - AC units
Using the setup guide, and referencing the model of Mitsubishi Electric AC units that I have, it supported a lot of the modes that are possible. One omission that I would like to have added is the "quiet fan mode". We have a unit in the bedroom that we use every night and with the IR remote that came with the unit you can…
-
Fix HomeKit support (round up of feature requests)
Hey tado, everyone seems to know better than you what your HomeKit support needs. Here I gather all the requests I have seen around: Allow temp/humidity sensors to be exposed independently. We bought these pricey TRVs. Why don't you let us use all their features? Expose battery levels in HomeKit. It is really stupid that…
-
SUMMER MAINTENANCE CYCLE
Tado needs the following. A way of cycling all the valves at least once a week during summer, and running the central heating for a couple of minutes to prevent valves seizing, to prevent pumps calcifying in hard water areas, and to prevent dead spots where sludge settles and to cycle inhibitor. All that is needed is a 10…
-
Battery log
I have a couple of dozen devices. I'm changing batteries all the time. I can't remember when I changed batteries last. This is information that's useful to know – to monitor the quality of batteries, or usage of the devices. There's no way to do this with the current app. You change dead batteries, and if the time and date…
-
Use Smart AC Control also as a temperature sensor for smart radiator thermostats
I have a room with both AC (controlled by a TADO Smart AC control) and a radiator (with a TADO smart radiator thermostat). The room is big and the temperature around the radiator in the winter is not what most of us using the room feel. The TADO Smart AC control is instead in a place where temperature can be sampled more…
-
Summer mode
My heating does not need to be and is not on during summer. I do however keep getting geofencing messages when everyone leaves the house. This is a complete waste of time and an annoyance when all heating is off anyway.
-
More data on tiles in app
Lots of free space on room tiles in the app, to display valued information if needed. Why not add icons for heater power level, scheduled off, or open-windows detection status ? Should be useful to get a very quick overview of the system.
-
Skip To Next Block in Schedule
hi. love tado :) here’s my thinking. i have blocks in the schedule and sometimes once i know we’re done with a room for the day, i knock down the temp for the current thermostat earlier than it would in the schedule. it would be great to be able to hit a button for a room to be able to skip on to the next block…
-
Tank Oil Level Guage
Hi guys, I'm not sure if this has been suggested before or not but I think an oil level guage in the tank that supplies my heating system that links back to the app would be a great inclusion Not only would it alert you when the oil was low but it could also estimate how much oil you have used each month and work out a…
-
Winter/Summer
Hi, is it possible to add a ‘switch’ in the app to change from winter to summer. This is so that ALL of the heating can be change from either "WINTER HEATING ON" and "SUMMER HEATING OFF".
-
Allow users to set heating parameters to reduce pipe noises, energy drain, improve normal heaters
During my use of tado equipment I noticed the early start algorithm can start very early, heat the heater to 80 degrees, and occasionally really ask for a lot of power from the heater very quickly. Especially in older homes/older installations, this can cause issues: You wake up early when the heater wakes up, even at…
-
Working Support
Here is a really novel idea. A support service that actually supports its customers! Having run into an issue, finding out that all support is now via the chat bot. Only to find that no support engineer has even looked at the request in nearly 48 hours. Disgraceful!
-
Recycle unused adapters
Hello. I haven’t needed any of the supplied radiator valve adapters, so I have 7 unopened packets. Be a shame for these to go to landfill. Many others must not use theirs. Can Tado offer a way to return so they can be reused?
-
indication that the heating boiler is running
on the app main screen showing rooms another box saying if boiler is active or not
-
Send notifications when firmware downloads taking place
Recently at 04:00 all my tado devices disconnected from the internet and all smart radiator valves turned to off. During the day various devices reconnected then disconnected again. On investigation I found the Smart valves were being updated with new firmware. On continuing tado I was told that firmware updates can…
-
Manual override notification
Please add a mobile notification when the temp is changed or turned on . As it would be very handy. I have a autistic child who keeps turning the wireless thermostat on an we don't notice till its too late Thanks
-
[Energy IQ] Allow for new meter and continue entering meter readings
When replacing a meter, it becomes hard to continue entering meter readings as one has to add the last old meter reading to the new meter readings (and sometimes even subtract the first new meter reading from that number too). Under Energy IQ, provide a meter reset button, with for the date of changeover: ++ the first new…
-
Receive smart meter data
Either access smart meter data, or contact loop to share their access. Use this data to attribute costs to room schedules.
-
TRV with empty batteries closes valve, but keeps requesting heat
The batteries of my TRV were empty and I received this email from Tado: > When your Smart Radiator Thermostat does not have enough charge to function, it will automatically close the radiator’s valve and the heating will remain off until you replace the batteries. Sure enough the valve was closed and an empty battery icon…
-
Enable Tado to use other temperature sensors via HomeKit
It would be very helpful if Tado could utilise existing temperature sensors that are also connected via HomeKit. I have several existing temperature sensors in my house(e.g. Netatmo) and don't want to have to buy additional Tado ones simply to get meaningful room values to control my heating. The smart radiator valves are…
-
Humidity notification
Tado keeps also track of humidity percentage in the room, it would be useful to receive a notification when it reaches a certain percentage so that I can open the windows and clear some hair.
-
New Device - Tado Immersion Hot Water Heating Controller
Many homes having a hot water storage cylinder would also have the hot water heated by an element in the cylinder either as standard or as a backup option to the gas heating system. I wanted to raise this subject here to help gauge if there is actually an interest within the community of Tado users? Do you have a hot water…
-
Adjust humidity readings (Humidity offset)
Graag een optie om een offset mee te geven aan de luchtvochtigheid. Zelfde optie zoals bij de temperatuur
-
Directly select room on the Graph page, without navigating away
Please could a drop down to select each room be included on the graph screen in the App? This would allow quicker comparison of how different rooms have behaved, without having to navigate away to a different room and then selecting the charts again and again. I find the graphs of each room very useful, but find it…
-
Controlling heat pump for heating and cooling
By now more and more owners adopt air-water heat pumps to heat and cool their houses by water plumbing under the pavement, so saving energy respect to other solution. What is of paramount importance given the present surge of energy prices. Yet so far Tado has no solution for this configuration, notwithstanding it would…
-
Advanced smart scheduling
Many people work shift patterns that require a different heating schedule each week. Would it be possible to have advanced scheduling to cover multiple weeks? Ie the ability to set a heat schedule for one week, and then have it repeat every x amount of days/weeks? In exactly the same kind of way you set up repeat…
-
Auto meter readings
The App needs to access meter readings automatically if the Intelligent IQ is to be any good Apps like Hugo already do it, the Tado app should too
-
Ability to rename device
When batteries are running low I get an email informing me that a particular device in a specific room has an issue. In some rooms I have 4 radiators. I then have to go round ‘blinking’ the stat multiple and watching all the stats in the room to find which one it is. it would be great to be able to rename or give a…
-
Smart AC Control to turn off AC unit when desired temperature is reached
Could it be possible to add a feature to the Smart AC Control that would allow for AC unit to turn off automatically when the desired temperature is reached, and then, when the Smart AC control detects that the temperature has raised 0.5-1 degrees over, to turn on the AC unit again? At the present moment, using the Smart…