-
Enable tado on wifi without internet
Today I had 6 hours without heating in the winter. My internet was not working for 6 hours. Tado expects the bridge to be connected to internet for smart scheduler to work and connect with wireless thermostats. Why not enable bridge using wifi home without internet? A heating system should never rely on internet. Relying…
-
Protect thermostatic valves from stucking closed during summer (off heating season)
Most thermostatic valves get stuck if they are left in a CLOSED position for an extended period of time. In order to prevent this we could either 1) leave all valves OPEN when heating is off - if the heater does not work, it makes no difference which position the valves are, and in OPEN position they do not stuck. Or 2)…
-
Making smart schedule more smart
Would be nice have one page in which they are group the history for heating activity of all rooms together, to have more clear when the boiler can be left off reducing one or more temperatures at a certain time. (Sorry for my English)
-
Guest car support
For guests using the home charger, offer the capability to control the charger timings by: - manually setting start and finish state of charge - departure time - make/model of car
-
Enable eBUS support for Tado X Wireless receiver
The V3+ supports both eBUS and Opentherm however the newer product series X does not support eBUS. Please enable also eBUS support for the X series. I imagine since you have the code for V3+ in the firmware it could be refactored over for the X and with a firmware update it could work.
-
Energy IQ - Better process for when energy meter is replaced
I recently had to have our smart gas meter replaced, because the existing one became faulty. This meant that my meter reading dropped back to zero when the meter was replaced. When I came to enter a meter reading in Energy IQ, it said I could not enter a number lower than the previous reading. I contacted support, they…
-
Schedules and shared custody
I have my kids in shared custody and need to manage the schedule manually to lower heating in their room on the week they are not present. I really think that shared custody is more common these days and that Tado should consider managing that in a easier way in the app so this is dealt with more transparently. I…
-
Heating System Override switching it on for 1hr, 2hr 3hr or set a time
Strangely, the Tado system allows you switch on the hot water heating for a specified time outside the schedule. But it is not possible to do the same for the heating. Instead, you have go into each device, which is a ridiculously time consuming and fiddly process. Yet, it is standard functionality on most central heating…
-
Select how long boost hot water for Tado X
I've switched from the V3+ to Tado X due to connection issues with the bridge. With V3+ in the app I could select how long to boost my hot water for with the pencil, this was a vital feature for me. With tado X I can click boost but it is only set for 60 minutes and can't be edited. I see from tado's website this is a…
-
Hot water override
need an ability to 'boost' hot water for a short period of time. We have a system with a hot water tank. Sometimes we can run low on hot water and need an option to boost it for a short period - say 30/45mins. Currently the app allows you to override the schedule until the next event, inevitably it means you turn on the…
-
Temp. Return sensor
Having a return temp. Sensor clamped on the radiator will allow more efficient control of the thermostat as it often over shoots on set point. Monitoring the return temp. Will make a huge difference
-
Exposure of additional information to Matter for Tado X Radiator Thermostat
Hello, I'd like to ask if the development roadmap for the Tado X Radiator Thermostats has the exposure of additional entities to Matter planned in the near future? I'd like to see the battery % and also the valve position (valve open %) directly within the connected home automation ecosystem through Matter, which is…
-
Incorporate fixed costs and taxes in the calculation of energy expenditure
Dear Tado team, I would like to propose an improvement that I consider useful for many users: the possibility of including fixed costs and taxes in the calculation of total energy expenditure. Currently, the application only allows the variable rate per kWh to be entered, which may underestimate the real energy costs, as…
-
Worcester Bosch EMS2
It appears Tado is able to work with older Worcester Bosch Boilers with HT-EMS. Possibly some others Bosch ones with EMS+ ? It will also work on Relay (R01), On/Off Mode, but this will NOT modulate the boiler. All new boiler installations in the uk have to confirm to EnergyPlus Regulations. This means having some of…
-
SUPPORTO PER TERMOSTATO TADO X SU CASSETTA 503
A questo link: potete trovare un supporto, da me creato, per fissare il termostato TADO X alle cassette elettriche mod. 503 in uso in Italia.
-
Tado X API
It seems that Tado v3 (and under) has a API allowing much more than what Tado X with matter is exposing. It is necessary for a good integration with a home automation system (such as Home Assistant). For example, I would like to be able to change the temperature offset, so I can use my room temp sensor instead of the valve…
-
Merged: Add support for alternative schedules
This discussion has been merged.
-
Temporary off
Please add an off until resume schedule within the room tabs, so when an individual is away for a night or the weekend, one room can be turned off with one click. If this could be set to resume after a chosen time, which currently is restricted to 12 hours, that would be even better.
-
Setting for binary relay operation
I have used my Tado V3+ thermostat to replace an old fashioned binary thermostat. Love the features but find the 3 'wiggly lines' levels of heating very frustrating (and slow to heat rooms). Would it be possible to add a setting which provides a simple binary on/off heating arrangement i.e. the relay is always on if the…
-
Tado x regolare la temperatura dei caloriferi, impostare icona quando la caldaia è accesa
Buonasera chiedo di poter impostare su ogni testa termostatica la temperatura di mandata nel calorifero per tutti quelli che non hanno il protocollo opentherm in modo tale da regolare automaticamente con l'algoritmo in base al meteo ecc la temperatura dell'acqua dei termosifoni. Mettere una spia su app per vedere quando si…
-
Creat a new group for Tado-X users
Mods, can you create a new group for Tado-X usrs. It makes browsing through posts much easier, as V2/3 and X are not compatible with each other, and they do not share the same problems and solutions.
-
Dynamically adjust opening percentage based on rest of system as well as heat demand
A couple of weeks ago I posted a suggestion that users be allowed to set the minimum opening percentage on the smart valves to alleviate water rushing noise. In a separate thread about vibration, a solution was suggested to remove the Tado valve from the radiator nearest the boiler because "…it can happen that the water…
-
Geolocation Improvement's for Mobile users W3W?
Tado like devices often get repurposed into not conventional ‘homes’, such as canal boats and Rv’s Could the home location be made dynamic either using data from the home network ( our teletonica router has a gps function)? If that is too complicated or not possible due to the hardware limitations in the internet bridge,…
-
IFTTT replacement - customised boost temperature and duration
I used to use IFTTT to boost my heating to 21 or 22 degrees for 1-2 hours depending on the setting. It was WAY more useful than just 25 degrees for 30 minutes. Tado removed the integration, but could features like this be integrated into the app then? It seems like an easy change, we can already boost, it just needs to…
-
Night mode
Hi, I think it would be useful to have a "night mode" with a setting in temperature. With the other modes, away and home can be set as a scene recognised by alexa, Google home. So we can stop heating the apartment or some rooms when we go to sleep with third-part routines/automations.
-
Stabilizing heat demand pattern for constant set temperature
I live in Scandinavia and often work from home, so I have a consistent heating demand throughout the day. When looking at the temperature/heating graph view, it is clear that the heating demand (and temperature) follows a cyclic pattern with a period of 45min on average. I'd love to post an image but I don't think this…
-
tado GmbH Incident - degraded performance affecting the tado° app - 19 November 2024
Yesterday, as reported by tado GmbG Inicident, there was a temporary degraded performance affecting the tado app. Just to inform you how this incident may have affected my Panasonic Aquarea heat pump system. It appeared that the heat pump did not warm the house at all for some hours. Due to the heat already present in the…
-
Profiles (again)
How much work will there be to enable us to create differnt profiles in the app? I know its been asked before but users seem to have an answer by adjusting the existing home profiles. I DONT WANT TO DO THIS. I want to press a button when for example we have guests staying or if we have a snow day or i'm working from home…
-
Schedule a boost
I am often away from home. My underfloor heating has a 24 hour thermal lag from 6 degrees to 22 degrees. I regularly forget to preheat it. Can you please add a facility to diarise a temperature boost for one or more rooms?
-
Smart Global Off Time with Conditional Notifications
Overview: I’d like to propose a feature that allows users to set a "Global Off Time"—a hard cutoff time at which all heating devices in the system are turned off or reverted to a predefined safe state (e.g., frost protection). This feature would address the issue of unexpected heating events during the night, offering…