-
Schedule that is NOT internet dependent (safer)!
If you are on holiday and your internet drops, Tado continues with whatever setting it had at the time. In other words, your hot water could be ON for the rest of your holiday, not a good thing (and you will not know about it as you no longer have remote access). This is the one flaw I find in Tado. It appears that…
-
Comfort Zone - Change comfort temperature display
I find 20 degrees too hot for “comfort” and prefer to be able to adjust when it shows as orange and when it’s too cold or hot for ME. Comfort zone is a known Zone, not absolute and different for different people, what is hot for one person might be cold for another. Our comfort temperature changes in response to the…
-
Display on/off on home screen
It would be good if we can see which radiator is on or off without having to click into the room.
-
Unlock SRT manually
Would it be possible to allow a feature (that can be activated or not) to manually unlock the SRT using a 3 digit “code”. You could configure a code in the app and then input it using the SRT, turning it up and down in a certain sequence (like for safe) to input the code to unlock it when you don’t have your phone.
-
Smart AC Control 10° setting
Supporting frost protection in the Smart AC Control commands
-
Heating to text size
Please make the heating to text size and font colour more readable.
-
Add Sunrise/Sunset to Graphs
By adding sunrise and sunset to graphs would allow most novice users to understand the natural thermal gain/loss purely from outside temperature and pressure on their homes and differences to different rooms. B)
-
Away mode schedule
It would be great if Tado would support an away mode schedule: a schedule that only operates when away mode is triggered, instead of the current single away mode temperature. My use case: due to dynamic energy pricing it is wise to start heating around noon, even if I'm away. But if I'm home in the morning than heating…
-
Hot water control when away
At present if your geolocation setting is set to away then the hot water status can either be on (constantly) or off. This does not work well if you have a regular heating pattern for water (say 3 times a day) and you are out during one time period which stops the heating cycle. It would be better to give an option to…
-
Multi home
Please will you rewrite the app so that you can use Tado in several homes from the same app using the same names, passwords and login details
-
Master temperature
I’d love it if there was a way to have a unified master temperature. It’s always baffled me why you would not have the option to set the temperature of the rooms/thermostat and then just alter the on off times.
-
Improve wireless temperature sensor clip
The clip that attaches the unit to the wall mount (backplate) does not hold the unit in place well enough. Even when taking the unit out of the original packaging the clip didn't hold the backplate and the sensor device together. It's only a 1/4mm half spherical bump and doesn't seat strongly enough. I reported this to…
-
easier accommodation of Landlords for BTL properties
Hi, I have Tado in our home. We have smart thermostats on all our radiators and I really like the system. I am also a landlord for 2 BTL properties and wondered about setting it up in them. I can't see how to go about this with the current system. I wouldn't want tenants to pair devices to their own account, because…
-
Switched Fused spur / smart plug controller
Hi, I really like Tado and we have smart thermostats on all our radiators. However, we also like our electric fire on in the living room from time to time. It would be nice if there was a switched fused spur or smart plug option so we could control all our heating devices through Tado. We could control the fire through a…
-
Booster
I think it would be a good idea to have the option to add or remove the booster button on the app as some time it get pressed by mistake and it cost a lot more to use as well due to high prices of gas
-
Helpful for Tado to revert to the original temp when turned back on again, not just the default 21C
As you can see from the screen shot below, on a Friday there are 7 different time / heating slots in one room - all of which may need to be turned off when occupied and then turned back on again - often on an alternating weekly cycle Ideally there would be a second Heating on/off toggle switch that works for the entire day…
-
Automatic temperature/ventilator speed for TADO Smart AC control.
A growing number of people use air conditioners (AC) to heat their houses (cheap, available, efficient). Temperature measurement is done in the AC unit, close to the ceiling of the room.This location results in poor temperature control in the room (stagnant warm air layer). With the TADO Smart AC control you can measure…
-
Smart meter integration
Smart meter integration for the uk market and maybe world wide for better understanding of energy bill within the app
-
Colour coding for rooms heating up
Can I suggest using a different colour in the app for those rooms that are heating?
-
hrll
safacasfvasfvasfvcasgfvsdgbsdgbsdgbsdbsdbsdbsd
-
Verbetering usercase Slimme Aircobediening V3+
Ik gebruik de Slimme Aircobediening V3+ in combinatie met een Fujitsu Airco installatie. Deze Fujitsu heeft een aanzienlijke afwijking tussen de waargenomen temperatuur en de werkelijke temperatuur waarbij de Fujitsu een tot wel 5 graden hogere temperatuur aangeeft dan de door Tado gemeten temperatuur. Doordat de Slimme…
-
Support for Viessmann PlusBus
Since 2020 the Viessmann Vitodens 2xx and 3xx range of gas boilers do not support KM-Bus or OpenTherm any longer. Viessmann decided to "upgrade" the interface on this boilers to PlusBus. This is an in-house developed protocol which they claim is an evolution from KM-Bus. However there is zero information to be found online…
-
App display bug
I have two radiators in lounge that have linked tado smart valves. Recently, I found that one of the radiators was not getting warm. Investigation showed that the return spring on the valve pin had failed and the valve was stuck down. Because I couldn't get around to depressurising the system to swop out the valve, I…
-
Schedule by month/season
Ability to set schedules for a wider period than monday-sunday. If I cud set every day for the calendar year would be helpful/batch up months and seasons. Easier!
-
Open thermostat with empty battery.
It would be very helpful if there was an option in the app to leave the thermostats open (perhaps with a choice of 0-100%) when they run out of power. I currently have three thermostats, one of which constantly reports that it's out of power even when it's not, and this one also runs out of power much faster, requiring a…
-
Improve reception range of the Bridge
The connection with the radiotors is often lost. The Bridge has a short range. A more powefull Bridge or a mesh system would be great
-
IFTTT trigger when termostat valves open, closes or passes a certain threshold
I would like to be able to make my smart home turn off my heat pump, when the desired temperature has been reached in the house. I currently use temperature thresholds, but it would be much simpler if Tado could trigger via IFTTT when valves on my thermostats open or closes. So bacically, a trigger if room "Living room"…
-
Stop linking the password reset back to the App
If I need to change password, or have forgotten my password, the password e mail automatically links back to the app. The app then does not allow for a password reset. So you can only ask for a reset, get the link, go back to the app. The result is that you go around in circles and can’t log in or reset your password! The…
-
Option to have Away turn off everything even manual settings
Often we occupy a room at random times during the day, when we leave home all the auto radiators shut down but not the manually set ones. It would be nice to have an option to turn all off when away from home is sensed. Once away from home it should still be possible to manually activate individual radiators to pre-heat…
-
Issues Notification
This morning the heating was registered as on but the temperature in all rooms was not increasing. I didn't notice. When I got up I noticed that the temp was low in all rooms. I checked the app and the Care and Protect part of the app registered that all valves were running at 100% but temp was not rising. On the Wireless…