-
Launch a range extender or upgrade to mesh network
Tado ticks many boxes but it's behind the competition in its lack of signal booster / wireless repeater. I'm unsure whether to take the risk and buy the system for my relatively large stone house given the risk of radio dropouts. If I knew I could add a range extender if required, I'd have the confidence to buy. Perhaps an…
-
Support multiple schedule configurations such as spring etc..
It is very common to want different sets of heating parameters for different occasions. A typical example might be a different set for summer versus winter. Or for when guests are staying versus not. It would be great if the Tado system supported the ability for user's to create multiple named configurations and switch…
-
Multi Home Support
I would like to use tado in my main house and in my vacation home. Currently this is only possible by using one account through the app and the other account using the web-app. I would like to have both available in the same account.
-
Individual Geofence Option
Hi. Not sure if this has been mentioned before, but would be great if you could set-up individual Geofencing capability for each individual Smart Radiator Thermostat. To explain, I am often away from home for several days at a time for work and would like to be able to automatically detect this and shut off the Radiator…
-
Reduce the comfort temperature range to 18-21°c
In the uk a room set for the comfort range of over 20°c can far exceed a comfortable temperature. I would suggest reducing this so my app doesn't think my house is cold all the time
-
Release a smaller, cheaper Wireless Temperature Sensor for the Smart Radiator Thermostats
The recently released "Tado Wireless Temperature Sensor" is essential, in many scenarios, to have accurate operation of the Tado Smart Radiator Thermostats. Which, due to their proximity to the radiator, are not typically able to measure the actual room temperature themselves. However, many find the price (£69.99 / 79,99€)…
-
Preventing radiator valves from getting stuck
I have replaced my heating control system with Tado smart vales on all radiators. On my previous system there was a feature that opened and closed all TRVs at a fixed time once a week irrespective of any heating schedule in operation. This operation did not take more than a minute or two. This meant that valves not used…
-
show battery charge level as a percentage
Please show the battery charge level as a percentage or even better show a graph of the battery charge level over time; this will provide much better info on anticipating when batteries need to be changed.
-
Notification when device looses connectivity
Please make so the app gives you a notification if one of the devices looses connection.
-
my.tado.com : support for 2FA
Hi. There is a ETA for support 2FA for the accesso to my.tado.com ? Best regards
-
Limit user access / privileges
We have family members who visit our house when we're away sometimes. We've added them (their phones) as Tado users so that the geofencing detects when they're here. Some of them have a temptation to change the settings which I don't then notice for a while. Is there a way to limit other users' ability to change the…
-
[Released with tado° X] Make the Smart Radiator Valves quieter
I find the Tado Smart Radiator Valves are too noisy for use in bedrooms. The motor noise when opening/closing the valve is loud enough to disturb sleep. I have had to set my bedroom schedule in a way that ensures the bedroom heating will never turn on when we could be asleep, and so have to manually turn it on everytime I…
-
show humidity on room tile
Why do I have to go into a room to see the humidity? There’s enough space on each room tile to add the humidity figure.
-
Show the flame icon on the Tado thermostat display when the boiler is running
Very useful to have at a glance if the boiler is running without having access to the boiler display. This is standard in almost all the thermostats.
-
Disable TRV "calibration" when offset is changed [required for using external sensor]
As you may have read elsewhere on this forum, myself and other Tado users have been working on ways to make Tado TRVs more usable by using cheaper external sensor to read the actual room temperature and dinamically update the temperature offset of the valves with great results. The only drawback of that is that we have to…
-
Merged: Smart Radiator summer / maintenance / bleeding mode (leaving the radiator open)
This discussion has been merged.
-
Keep public roadmap up to date
Tado publishes a public roadmap here which is commendable for a heating technology company, but expected for a disruptive tech company. However, the rate of updates to the roadmap is particularly low, with the last update provided many many months ago: 31-08-2018. It would be excellent if the roadmap could be updated on a…
-
Maximum opening percent and time on radiator thermostate
To ensure not to send hot water out of the radiator, it could be helpfull to could adjust the maximum opening percentage combined with maximum opening time, followed with a minimum closing time.
-
Samsung Smartthings
Hey How do i get Tado radiator to work with Samsung Smartthings - I tried both smartthings app(classic) but no luck :(
-
Data export
Please allow download of chart data for each room. This would be most useful as a CSV file. Data available should include date/time, actual room temp, demand temp (what the heating has been set to), humidity, open window detection, etc. I would like to be able to analyse my own data, and be able to make easier comparisons…
-
Modify Limits of Room Temperature Control
Is it possible to modify the upper limit of the Heating Temperature in the Smart Thermostat (it is currently restricted to 25 degrees Centigrade)?
-
Local API
Add an API server to the internet bridge (even if it requires newer, more powerful hardware) that supports controlling devices within the local network. Philips Hue provide a great example of how it can be achieved. My justification is twofold. Firstly, a local API can be accessed in the event of my internet going down.…
-
Mode that emulates a manual TRV behavior for Smart Radiator Thermostat
I wonder whether anyone else would find this useful: Problem: old leaky house that is unable to retain heat, potentially with mixed heating modes. Second problem. How to make best use of a boiler firing when zone is not expecting it. Solution: introduce 2 new modes for Smart TRVs - Passive and Passive Limited. The idea…
-
Internet Bridge with PoE
Would love to see the Tado Internet Bridge with Power over Ethernet. This could save us an additional cable because everything can be done with the Ethernet cable. Since the raspberry pi and many other similar devices can do it, this should be an easy task for Tado.
-
[Released] Support more than 10 rooms and 25 devices
Edit from tado°: available with tado° X Original post: Please can you add support for more than 25 devices and only 10 rooms, with a 5 bedroom house, with ensuites with a number of downstairs rooms, 25 devices is not enough when you want radiator TRVs and smart thermostats in each room. also limiting the total rooms to 10…
-
[Released] Finer granularity of temperature reporting and adjustment for Smart Radiator Thermostats
Throughout the app temperatures are reported and set in units of whole degrees. It would be beneficial to increase the granularity of both reporting and setting to half degree increments.
-
"Summer/Cooling mode" for wall thermostat
Hi there, I have an underfloor heating with a cooling function. In summer, cool water can run through the floor to cool the room. For that I currently need to set the temperature to max (25°C) to keep the thermostats open. If the room temperature would rise above 25°C the thermostats would close and prohibit a cooling…
-
[Released with tado° X] Support for Matter standards
Full support and integration with the Matter standards https://buildwithmatter.com as the standards develop and get published - ideally without having to upgrade the hub, etc.
-
Always show temperature on Tado ac
Have an option to set Tado ac to always show the current room temperature on display.
-
Allow swiping to access next room
Once you selected a room you should be able to just swipe to the next room but have to come out of the room to go back to the home screen and then select the next room; this is rather cumbersome and was much easier in the pre-v3+ app