-
Issues with pointing to the right controllers
Hi all. Sorry if this has been asked I’ve been searching all night and lost hope. I have a wired thermostat that does heating only and an extension kit on the boiler for hot water. The thermostat should control the heating and it does however the smart radiator adaptors thing the heating controller is the extension. I…
-
Lost outdoor air quality/ pollen count
Outdoor air quality and pollen count have disappeared, anybody know why? :/ :/
-
Can I see from the app if a radiator valve thinks it is open or closed ?
Another newbie question :( Can I tell from the app if a radiator valve thinks it is open or closed? Reason for the question is that I have Comap valves so need to select a pin to match physical dimensions and I'm right between two sizes. It seems that one of my valves is letting hot water through. So I want to check if it…
-
Do I need a radiator valve in a room to enable requesting heat from my boiler ?
Hi, new to Tado and the forum and can't find an answer for this anywhere. Here's my scenario: 1. Fitting Tado radiator valves to all but one of my radiators. 2. 3 radiators in my main living area will be grouped to one wireless temperature sensor 3. I planned to keep the radiator in my master bathroom on a trv set to…
-
Radiator smart thermostat VA01 features
Does anyone know (and can confirm) VA1 revision features the same as VA2? I have found information about Child Lock, but what’s about other features like Air Comfort and others?
-
Solving the internet bridge problem
I have read multiple posts on resolving the issue when the internet bridge stops working. i.e. all 3 lights not on. I have invested in a significant number of tado devices, so I'm looking to solve the problem rather than switch to a new device manufacturer. I have just been on holiday for 3 weeks and twice my internet…
-
Boiler on constantly
Hi, newby here so be kind. I have a Worcester Bosch Greenstar Ri system boiler. I have installed the wireless thermostat and programmer but have an issue with the boiler being on constantly. I see from previous discussions that this is not an isolated incident but my issue appears to be related to the old room thermostat.…
-
Heating stuck off then stuck on!
Anyone else had issues this morning with the heating being particularly weird? Didn't come on this morning. Tado thought it had come on. As usual care and protect therefore useless. Reset the main thermostat and the heating came on when I forced it on with the boost rooms option. It wasn't coming on with just the schedule.…
-
User access to selected rooms only
Hi, Is it possible to give a user access to selected rooms only? Eg the kids only for their room and the living room? Or an au pair only for her room and the shared bathroom for example?
-
How to replace a zoned Honeywell CM707 wired thermostat system to a Tado Smart Wireless Thermostat?
I have a Honeywell zoned thermostat system with an Ideal Logic Combi boiler. There is a wired thermostat in the front entrance room that controls all the hallways and the downstairs rooms and another wired thermostat in one of the bedrooms which controls all the upstairs rooms and bathrooms. These are controlled by the…
-
Experience having Tado on radiators in pit?
Anybody has any experience with this? In my living room, I have 2 radiators in a pit/under floor level. They currently do not have a valve at all; they're on when the heating system is on, which obviously isn't very energy friendly when I only need heating upstairs later at night. I asked a professional to include valves…
-
Manual timer override via App
New Tado user here. Have been playing around and have a question. In the app I can set the behaviour to Timer and set a time for both the heating and hot water but when I switch either on via the app it doesn’t obey the timer interval and waits until the next schedule. Is there a way to have the app use the timer as with…
-
Open window sensor help
Is it possible to use a window sensor with alexa to put trv in away mode. I have set some window sensors up and they turn the trv off, when open, but when the window closes again it sets up a manual temperature rather than returning to the schedule
-
Broken battery bay on wired thermostat weak and poor design plastic
The plastic of the battery bay is cheap and weak and not strong enough to support the pressure of the leaf spring contact that hold the batteries in place - very poor design. Is it going to be hot glue, super glue, wood wedge- you get the idea… a bodge piece of job on nasty bit of kit that is not cheap. Good software, now…
-
How do I turn hot water on when Internet Fails
Hi our system had been working normally, but after an upgrade to our service we lost access to the Internet. How specifically do I manually trigger the water to be heated? All I could do was to set the test mode by pressing the hot water button on the Internet Receiver. This would fire up the boiler for around 60 Seconds…
-
Auto Assist Price Increase
Auto Assist price increased to €3.99 or €29.99. I like to buy this 3 out of the 6 months. More as just a guide. With the price increase. I don’ think I will be bothered.
-
Possibility to install 2 wireless thermostats in two different zone to control the floor heating
Hi, I have a full Taco installation for years but after having moved in a new house, I have a problem: I have a floor heating with 2 zones : Kitchen and living room The floor heating is controlled some valves (sorry for my bad English) located near by the boiler. I would need to install something next to the valves that…
-
'Done' in app's graphs doesn't work anymore
Since this week, when I check the temperature of one of my rooms in the app, when I try to go back, the 'Done' button at the right top doesn't work anymore. Android. Any idea if that's me or the app?
-
Changing batteries after 2 weeks
Hi. I am using a Tado system with wireless thermostat, a connection device by the boiler and a pairing kit in the router. Sorry but I am not familiar with the technical language in this matter. In the past 4 months I've change the batteries on my thermostat every 2 weeks. Why does it drain so fast and why is restarting…
-
V3+ AC have to send ‘off’ to wake the tado
Bit of an odd one, if I want to turn on my AC I have to send an off command first otherwise the unit doesn’t beep and respond. Is this normal or is there a setting I’ve missed.
-
Why can’t Tado send you an email alert when a room goes offline
I couldn’t find any old threads on this one. Does anyone know why Tado can’t alert you when a room goes offline? It can tell you about batteries being low. It can would be really good to be alerted in the same way when a room goes offline?
-
Tado Error 7168
I’ve spent the weekend fighting my Tado Smart AC v3 devices, all of which mysteriously stopped working on HomeKit simultaneously. I’m ready to throw them all out the window. I fixed three of them. The fourth one kept giving me an “Accessory Already Added” (I forget the exact wording) in HomeKit. So I followed the Tado…
-
Tado won’t stop the central heating after internet hub changed
Hi, my tado starter kit has worked without any issues in the last year until few days ago when I have changed the broadband package from virgin with the hub 5 and 1gig speed. After I reconnect the bridge to the new hub my central heating is always on. Only way to stop it is to remove the smart thermostat from the wall…
-
Can Tado control my hot water?
I've just bought the tado starter kit. I have a combi boiler where currently I can set a programme for my heating and a separate programme for my hot water. I'm now coming to wiring up the tado receiver and seeing it might not accept the hot water wiring. Will that mean I can't programme my hot water as before? Currently I…
-
Heating works fine, but Hot water 'offline'
Hi. I'm able to control the heating as normal online on my app. Works fine. But the hot water is showing as 'offline' so I can't control it. Can someone suggest how I can fix this? Cheers, Pete
-
Worcester Greenstar Cdi Classic
Hi all I have connected a wired TADO thermostat to this boiler as per the TADO instruction and for a start 3 smart SRTs. All is working fine. the issue is that the wired thermostat is working in relay mode, and I was hoping to get it working HT-Bus (D17). I opened up the boiler with the intension of disconnecting the LR…
-
unnecessary hot water heating at the end of cycle
Hi, I'm curious if you ever experienced the following buggish behavior: the hot water schedule is set up to 7:00-7:30 and 20:00-20:30. The water temperature is reached after ~15 min, so the boiler is usually not heating when reaching the off time point. But when the off time point is reached after ~2 min the boiler starts…
-
Updating gravity fed to fully pumped
I am updating my heating system from gravity fed to fully pumped (S-Plan). My extension kit is quite old and only has a single button. How do I make the change?
-
installing Wireless thermostat v3
our heating has two separate systems wired onto the one boiler (Ideal) and we have a large hot water tank. The heating circuit for the house and the water is controlled by a Nest unit and a wired heat sensor. The underfloor zone (water based) is controlled by an EPH controller and freestanding thermostat/controller. I need…
-
Adding new ID to opentherm communication
Hi, I'm facing issue when my boiler is not behaving properly when using Tado thermostat (boiler is not modulating flame). After some extensive troubleshooting I found that issue is most likely in opentherm communication, more specifically, in missing message ID 2 (Master configuration). From what I saw comparing…