Current granularity in the temperature sensor is 0.1 degrees in the app and only 1 degree in the device. That makes it annoyinhg, because the most standard granularity in all themorstats in 0.5
@cbatis I was informed that when it comes to relay connection, the heating will actually trigger only when the temperature difference is at least 0.5*C
This feature therefore is useless to me and creates only hassle and confusion when the app shows 'heating to xxx' but it actually does not heat since the difference is too small...
@cbatis I actually agree for the change!
My comment is about Tado° ecosystem allowing you to go by 0.1° C, but because heating will actually trigger only when the temperature difference is at least 0.5° I see no point of it.
Sorry, I was not clear enough.
An UPDATE on my earlier post.........I have the Tado App on 2 different Android devices. My phone had auto updated the Tado App to 6.6.5 and this now has the "degraded" change to the Temperature adjustment of 0.5 degrees . However my other device (tablet) has not yet carried out the auto update........so I have switched off the auto update feature within my Google Playstore. This device is still operating with 0.1 degree increments.
So my concern is this ........have the Tado devices in question ( WST & WTS ) ever really been operational in 0.1 degree increments or have they simply been "rounding up or down" to the nearest 0.5 degrees [I won't give my opinion here].
Either way.......why has Tado done this ??
It's definitely not a device Firmware update.....but it is definitely an App update........however this is NOT indicated in the App update information. I finf this attitude towards the Tado Customer base as despicable,
@GrayDav4276 Yep - just noticed mine - Android.
@GrayDav4276 Yep I am Beta tester - does that make a difference?
I wonder if you both can confirm also that:
I can clarify a couple of points.......but I need to point out that I do not have any Wired Thermostats or Sensors.......I have the following Tado devices :
A) Exrension Kit & Bridge
B) Numerous SRT's
C) 1 x Wireless Smart Thermostat
D) 1 x Wireless Temperature Sensor
The latest Android App update (6.6.5) has resulted in changes to the incremental change to the WST & WTS devices [as seen in the App] .......no "new" changes to the SRT incremental changes [as seen in the App] ..........previously the SRT's were already "set up" as 1 degree (manual) incremental change, but the WST & WTS were "set up" to control the SRT's with 0.1 degree incremental changes. However following the Android App update the WST & WTS incremental change had changed from 0.1 degrees to 0.5 degrees.
Because I "blocked" the Android App update on my tablet.......the tablet (Tado App) still shows and apparently allows incremental changes of 0.1 degrees.......This leads me to conclude that the App is only purely acting as a "User Interface Display" and not actually "controlling" the settings of the appropriate "attached" device (SRT).
I am now beginning to suspect that Tado does not actually work on small incremental changes and are actually only able to react to 0.5 degrees (at the very best) or indeed a full 1 degree.......this could possibly explain why so many people have complained that their devices are continuing to "Heat to" after the " Set to" temperature has been exceeded. This may also explain why many devices show as "overshooting" a set temperature (as seen in the graphs).
I am very disappointed that Tado has updated the Android App without firstly applying it via the App Beta version (otherwise....what is the App Beta version for) and secondly.....why does Tado think that an operational downgrade is acceptable to its customer user base. And thirdly, my concern is that Tado "may" have been telling its users that the Tado system actually operates to the levels of granularity that the system is not capable of achieving..........but customers think it does.
@GrayDav4276 I am certainly leaning towards your comments in para 3 above and agree entirely with your 4th para. Did they think we would not notice!!
Technical team had confirmed to me that the heating will actually trigger only when the temperature difference is at least 0.5°C …and that’s fine as firing a boiler for every 0.1°C change is not best option.
If this is compromise between system performance vs boiler life, Tado° should at least work on a software unification for each device and operating system.
iOS app – 0.1°C accuracy (display & change | app ver. 6.6.3)
Wired thermostat – 1°C accuracy (change) and 0.1°C (display)
WebApp - 0.1°C accuracy (display & change)
Siri – 1°C (voice commands | iOS 14.7)
Home app - 0.5°C accuracy (display & change | iOS 14.7)