Home Suggestions, Ideas and Improvements

Support multiple schedule configurations such as spring, summer, autumn, winter, etc.

It is very common to want different sets of heating parameters for different occasions. A typical example might be a different set for summer versus winter. Or for when guests are staying versus not.

It would be great if the Tado system supported the ability for user's to create multiple named configurations and switch between then as required.

60 votes

Active · Last Updated


  • mw9342mw9342 ✭✭✭

    You should be able to save multiple sets of schedules and then switch between them easily; for example, you could have one schedule when you and your partner are both at work, then one if you're at home (day off, sick, ...), another when your partner is at home, and another if both are at home; even better would be if you could link each set to the presence of you or your partner in order to switch between the sets automatically; however, one should still be able to switch manually.

  • edited May 2019

    Hi mw9342,

    This is already possible, at least sort of - you can set three different schedules per room and toggle back and forth as necessary. I am referring to the Mo-Su schedule, the Mo-Fr Sa Su and the Mo Tu We Th Fr Sa Su schedules in your Smart Schedule on your app.

    Best regards,


  • mw9342mw9342 ✭✭✭
    Hi Frank - how do you do that? When I look at my settings I can’t see anywhere where I could create additional schedules nevermind switch between them.
  • I believe they are saying the "Schedule Days" option works as three different schedules, so you could theortically switch between different ones that way. But you would be restricted to the preset groupings, so you couldn't have the same grouping of days for each schedule.

  • mw9342mw9342 ✭✭✭

    Ah I see - not really what I was asking for; the MON-SUN group is not suitable for me, and neither is the MON-FRI,SAT,SUN grouping (see also make it easier to setup more relevant schedules for different days) so I only have one grouping available to me and therefore switching is not possible.

  • DLuckcockDLuckcock
    edited May 2019

    An excellent idea for the home ChrisJ.

    In a similar vein I have to change the settings each week for multiple time slots and zones using Tado to control the heating in the church rooms that are occupied by different groups. If we could create pre-programmed weeks 1, 2, 3 & 4 it would make life a lot easier. Regards

  • This is something I would really like to see as my building turns off heating during summer, so I just want to turn off all my radiators from a specific date as there is no reason for them to adjust themselves during this period.
  • I agree this would be really helpful!
  • Now this is a good suggestion.

  • Agreed. We need multiple schedules, with each schedule being able to include specific zones, and be able to manually or automatically switch among schedules as we wish.

    For example, I have two homes, 100km apart, in different climate zones, and I spend weeks at one, then weeks at the other. This means that whichever house I'm not in may get quite cold. Particularly the one in the mountains may require more than a day to come up to comfortable temperature as the inner wall surfaces get very cold.

    For that, I need to be able to remotely switch from "Away" to as-if-I-were-there-so-that-it's-comfortably-warm-when-I-arrive, something for which geofencing is useless, as it needs to start heating hours or days before I even set off for that house.

  • Agreed, my scenario is divorce and having the kids about half the time. I am currently experimenting with multiple zones ie one per room and keeping the kids bedrooms off when they are at school. But I also work from home, so I'd like the zones to each accept different home/away parameters or have alternate schedules that are easily switched eg Home 1, Home 2, Away

  • Agree a great idea. Multiple pre-defined policies that can be applied with a click would cover it. They could be applied for seasons, guests, etc
  • Is this type of control even needed? I have Tado TRVs on every radiator so the heating for each one would only come on if needed. I.e. room 1 temp is 30+ degrees C in the summer and the smart schedule is set to heat to only 21, so it would never be needed.

    In the winter when the ambient room temp is say 12 and the schedule calls for heat, it heats to 21. So isn't this already allowed for automatically?

    If you don't have Tado TRVs on each radiator, I think a better way would be an external piece that gets actual temps (instead of data-provided ones) and acts as an auto-offset, and takes over if needed. I.e. external temp is 30 = do nothing or external temp is 5 so call for heat.

  • Agreed. As a retired teacher, I would have also wanted the ability to save and switch between different schedules for term time and holiday time. Now I'm retired, I'd like to switch between saved schedules for early and late starts (grandchildren visiting and us home alone!)

  • So it's the 30th December, a Tuesday, and I've booked the day off and got family staying, so rather than get up at the normal 6am for a Tuesday we got up at the more leisurely 8, spot of breakfast then showers for 4.

    The issue, tado was set up for a Tuesday weekday to not hear hot water past 8am as if we were here on a normal Tuesday we would be working from home and unlikely to be looking to take a shower, yet alone twice the normal number.

    So what would be ideal is a simple way to tell tado to treat a weekday as if it was a weekend day. On the simplest level just need to be able to input annual leave into a diary and have it follow a change of behaviour each day to look at either the weekends schedule or a specific holiday schedule.

    More advanced tweaks could look at national holidays for the location the unit is, and or a personal calender integration to pull the data automatically.
  • I would like to see something similar.

    The schedule I have setup currently aligns with the biggest part of the year when we are working and the kids are at school.

    When we are on holiday and stay at home, that schedule does not work anymore.

    It would be great to make 2 (or more) different schedules at least to switch between the normal schedule for when we are working that week and another one for when we are at home for the week.

    It should not be to difficult to implement as you already have the schedule system. Just make a toggle to active on of the configured ones.

  • Good idea this. I'd find this useful also.

  • This is a brilliant idea, definitely use it

  • Yes, this would be a very good idea, to have up to three or four sets of programs (optional use).

    A Seasonal programme setting would also cater for situations as we have now, with warm sunny days each day, and little need for heating in the evenings as rooms have been warmed by the sunshine.

    Another bonus with home working at the moment would be that the normal low temperature daytime settings could be replaced by an all-day comfort setting, as we are all at home all day every day, so rather than messing with our usual schedule we could apply the "at home" schedule instead.

  • A very good idea as I'm currently using a lot of gas because my doors to the garden are open a lot. When it's sunny and 16 degrees outside my living doesn't need 19 degrees.

  • WouterFWouterF
    edited October 12

    Please also like my idea to improve the early start in the winter: https://community.tado.com/en-gb/discussion/5369/improve-early-start/p1?new=1

    Tado wastes 1 hour of energy each day because the early start doesn't work as it should.

Sign In or Register to comment.