Manual Control of Home and Away mode

Sometimes if I’m travelling home, I’d like to be able to manually turn my heating back to home mode, so that my rooms heat up

At the moment I have to manually set a temperature for each room in order to warm my house, and can’t select Home mode until I’m within my home zone
16
16 votes

Active · Last Updated

Comments

  • jcwackyjcwacky ✭✭✭

    Are you aware that one of Tado's primary features, "Preheat Before Arrival" does this for you automatically?

  • Tado can’t know you’re coming home when you’re outside the geofence. A simple switch to tell it “I’m on my way” would enable it to ensure the heat is on (whether it pre-heats or not). It could easily estimate the journey time using my location. My home is not well enough insulated and the 5 minutes Tado gets when I cross the geofence is not sufficient to warm the house even with preheat on.
  • jcwackyjcwacky ✭✭✭
    edited March 18
    @princp You may wish to check your preheat settings. If you have it on “Comfort” it should make sure your home is pretty warm by the time you get home, no matter have far away you go. I've just been away for the weekend, I was 3 hours drive (180 miles) away from home and while away my Tado was automatically keeping it at my pre-set Away temp of 10ºC. We drove home today, about 2 hours before we arrived home Tado kicked in and started heating the house, so when we got in the front door, it was a nice temperature. Didn't need to manually tell Tado anything about my trip at any time.
  • We have a variation of this problem with nannies and baby sitters.
    We don’t want to give them control of the heating but we don’t want the heating to switch off when they’re there. Being able to toggle manually to ‘home’ mode would address this.
    Another approach would be to have phone clients that can only control the heating when on WiFi, not on mobile. This would ensure they only had heating control when in the house, and that their presence would be detected
  • similar problems here;

    I don't want to wate my phone battery by keeping gps on all day in order for geofencing/presence to work. If I'm at home my Wifi (and my Wife's) is typically on so that should be sufficient to go back to Home mode. In addition we have regular visitors (our household, caretakers for outr pets, etc) who do get our Wifi access as well, but no direct control over our Tado/heating. I have a perfect presence detection in my home but seeking for a way to control Tado Away/Home with that (Web http api JSON or using IFTTT).

  • jcwackyjcwacky ✭✭✭

    @AndrevdBerg What phone do you have? With today's phones you don't need to be worrying about manually turning on/off GPS. The location services built into todays phones use a variety of techniques to get your location and so geofencing should only have a minor impact on battery life as it won't be using the GPS very often.

  • @jcwacky I have a Motorola X4

  • Battery usage by phone location services is surely negligible these days?

  • I also am shocked you cannot manually switch to away mode.

    We have people look after kids some days (Nanny, grandparent etc.) who don't have the app.

    It seems the only option is to set up pre-defined time blocks with geofencing disabled to ensure the heat is on when one of them is at home with the kids.

    But of course, if we do that, and then go away for some time with the kids, I'd have to manually change all those individual time blocks back to being geofenced so that they switch to away mode.

    This seems unbelievably time consuming and burdensom when tado could just have a 'We are away' manual switch. Indeed, the app could automatically disable that too when you get home so you don't forget (or message you to ask if you are returning now, perhaps).

    Am I missing anything? If not, then please come on Tado, this is a simple thing and a no brainer surely to make the app easier for those of us with kids and child-care?

  • its quite infuriating that you can't set home or away manually. if you have been away and its cold it can take an hour for the crappy app to decide that you are home, even if you load the app so the heating will not come on and the house is cold.

    i get they want to leach money out of me for the auto features, but not having a manual override is ridiculous.

    even just its summer and its too hot and i just want to set everything off... have to do that individually on each device.

    for a 'smart' system, its pretty dum

  • jcwackyjcwacky ✭✭✭

    @TheMoleMan " if you have been away and its cold it can take an hour for the crappy app to decide that you are home"

    Sounds like a configuration issue somewhere, either with your phone or the app. Tado should start automatically heating before you get home. Often, when I've been away and I'm driving home, Tado will turn the heating back on, to Home mode, over an hour before I get home, so that it's nicely warmed up by the time I get there. I find this works great and is one of Tado's primary features. I agree a "Home mode overrride" would be useful, but I'd suggest working out why your "Preheat before arrival" feature isn't working first.

  • I agree need a manual mode. Preferably with the ability to set "off until" (such as for holiday when you know what time you'll return). Geolocation is not usable for me - primarily because a resident does not have smart phone (and can't have one).
  • Geofencing usage is very limited imho - it is set to my phone’s location but ignores if someone else is still inside - i. e. I go to work and my family freezes :) Manual home/away mode please!!!
  • I would really appreciate a manual toggle of home/away too. The thermostat is almost pointless as I have Tado TRVs. Would be handy to tap the hw button twice then toggle the mode with capacitive buttons. Come on, let's make more of the capable devices we have. The geofence is limiting as you have to set the radius quite far to allow Tado to heat the house back up by the time you arrive home, that you waste an hour or so of heating when you leave before it turns off. Tapping the button as you walk out the door is surely preferable. It could then auto turn back on as you start travelling home as you'd want it on when you return. Best of both worlds!
    Have we got a feature request list and any ability to vote up some of these ideas? I want to help make this product great.
Sign In or Register to comment.