-
Better adapt to slowness of underfloorheating
I have a setup with underfloorheating downstairs, radiators on first and second floor. the smart thermostate steers the floorheating valve by it's relay and a heatpump wirelessly trough an expansion kit. folowing the opentherm protocol. set temp on ground floor is set to a fixed temp 24/7 the heatpump should optimally run…
-
Prompt for Zone Controller
When installing multiple thermostats and radiator valves, there should be a prompt to choose which themostat is the corresponding zone contoller for each radiator valve. After setting up a wired themostat to the main boiler and a wired thermostat for underfloor heating, my radiator valves were randomly/intermittently…
-
Tado urgently needs the certificate for intelligent "hydronic balancing" (Germany)!
In Germany, switching from fossil fuel heating systems to environmentally friendly heating systems is massively subsidized by the government. One criterion for receiving this subsidy (e.g. 55% of the investment sum!!) is the requirement that the heating system in a house is optimized by means of so-called “hydraulic…
-
Let users choose which rooms to 'boost'
I’m sorry if I’ve missed this, but how on earth can I hit Boost and boost just a set of rooms rather than the ones which are not used? This is such a no-brainer feature, and when I search I can only find hack-arounds via IFTTT ( just discovered now not possible ) I can only assume that this is me being thick? Feature =…
-
Pre-heat and early start for Tado X
Hello, Just bought the tado x System and I am a bit disappointed that the pre-heat and early start feature are missing. Are there any plans to implement those two features? Please implement those two features🙏 Thanks, Florian
-
Change schedule change for all rooms simultaneously
I would like a simple method to change the schedule for ALL rooms by the same time simultaneously. i.e My heating profile is set to start at 6 am and to warm the house in stages by 8 am. For next week only I want to bring that forward 2 hours. Currently, it seems that I have to change the schedule for each room…
-
Calendar viewer
Hi all in my previous smart thermostat I was a calendar viewer that was very useful, basically is a calendar with a month viewer where for each days where the thermostat was on, appear a red dot under the day, this is very useful to have a fast view of the days where the thermostat operate, and by clicking on the…
-
Add a hot water 1 hour boost button in app
To save going into scheduling for short periods or having to switch hot water off rather than defaulting to the next change please add a simple 1 hour boost button.
-
Allow combining Smart AC Control and Smart Radiators in one room
Currently, Tado App doesn’t allow combining Smart AC Control and Smart Radiator in the same room. Please enable this feature.
-
Tado X API
It seems that Tado v3 (and under) has a API allowing much more than what Tado X with matter is exposing. It is necessary for a good integration with a home automation system (such as Home Assistant). For example, I would like to be able to change the temperature offset, so I can use my room temp sensor instead of the valve…
-
Airco integration in Tado X
Can you make it possible to integrate my airco’s in the Tado X environment. I own two Mitsubishi SRK60-ZSX-W airco’s and would like to control them together with the Smart Thermostat and Radiator thermostats into one system. Thanks.
-
extend matter over thread functionality of the X thermostatic valve
Great device, and it connects flawlessly with the thread network on my home assistant. So well that I now have fitted them in all the house. Ahead of the competition. There are a few functions I am missing though: I do not get to see the battery level over matter, nor the option for a firmware update (which might be…
-
Tado x Thermostat - Set the MAX temp
Hi, I need (so fast as possible) the ability to lock (via software) the thermostat X or to set the max temp so that people cannot set the temperature above the set threshold. Urgent!!
-
Zone controller by definition off
In the current softwareversion all installed thermostats get the same zone controller after installing a wall thermostat. This should not happen by default. Can't this be changed by making this a configuration part of the initial installation when a wall thermostat is added to the system, where the user gets the option to…
-
Support for the EMS2 bus - Bosch Condens
Bosch / Junkers / Nefit boilers with the EMS2 bus have been on the market for many years now, have a large chunk of the European market share but Tado only supports relay operation for them. I myself have a Condens 2300i boiler and while the relay mode works up to a point, the TPI algorithm operating the relay can't avoid…
-
Include a full calendar plan
I miss a feature to plan with my Tado radiator knops on a calendar day basis. For example planning a period of holidays (heating off/away), indicating days I work from home (heating in my working room on during working hours) The current weekly schedule by room is a good start but very limited when things do not follow a…