Active

Please use 0.5 degrees granularity in the wireless temperature sensor
Current granularity in the temperature sensor is 0.1 degrees in the app and only 1 degree in the device. That makes it annoyinhg, because the most standard granularity in all themorstats in 0.5
Offline notification
My Internet Bridge went off-line and I didn't realise for hours. A simple reset was all it took to fix the issue, which I could have done way sooner if I'd realised. Tado sends other notifications, like a thermostat needing batteries. I would like Tado to send me a notification, either push-notification in the app, or…
Status of each thermostat valve position
Build a function into the settings menu where you can see the status of each thermostat, if the valve is open and how open it is. It would be nice, when you are troubleshooting.
Exposure of additional information to Matter for Tado X Radiator Thermostat
Hello, I'd like to ask if the development roadmap for the Tado X Radiator Thermostats has the exposure of additional entities to Matter planned in the near future? I'd like to see the battery % and also the valve position (valve open %) directly within the connected home automation ecosystem through Matter, which is…
Dry Mode Getting Jammed Home Assistant AC V3+
Dry mode is getting jammed on my Home Assistant instance. Won't allow any changes of mode from the App or Home Assistant after a period of time. The only way to get drying to show up on my home assistant thermostat card, with my Daikin is by: Setting up my Tado Smart Schedule with the Dry setting on. Activating Auto Mode…
Worcester Bosch EMS2
It appears Tado is able to work with older Worcester Bosch Boilers with HT-EMS. Possibly some others Bosch ones with EMS+ ? It will also work on Relay (R01), On/Off Mode, but this will NOT modulate the boiler. All new boiler installations in the uk have to confirm to EnergyPlus Regulations. This means having some of…
Show warning on Schedule for a room ignoring the schedule because "Until ended by user" is in force.
It took me days to work out why my bathroom rad wasn't coming on in the mornings (and it's been blooming cold recently!). It turned out the room's manual control setting was "Until ended by user" and someone had twiddled the knob. I kept checking the room's schedule screen and a warning there would have saved me days of…
Control Hot Water through Matter
Simple, the matter integration could have the hot water end point.
Limit user access / privileges
We have family members who visit our house when we're away sometimes. We've added them (their phones) as Tado users so that the geofencing detects when they're here. Some of them have a temptation to change the settings which I don't then notice for a while. Is there a way to limit other users' ability to change the…
Dew Point Control via TADO Smart AC Control V3+
V4.0 Climate Control via DEW POINT COMFORT - Triggers - Door, Presence, TTS, Home AssistantThis flow uses Outside Dew Point Temperature to control any Climate Entity through Home Assistant. Tested on TADO Smart AC Control V3+ this does not require a paid subcription to TADO. Home and Away Presence Sensing Door and Window…
Create a range extender or let us use a second bridge...
Having olny 1 bridge per house is a massive design flaw yet to be addressed by Tado. Unless you leave in a tiny house made of cardboard walls, the TRV wlll lose connection or burn batteries in only a matter I'd a couple of weeks. I live in a house across 3 floors, I really struggle with the range and can't have full…
Lock for smart thermostat
Hi, Not sure if this has been suggested in the past, however a lock of the smart thermostat for me would be a great idea. I have one in my living room, and my daughter is constantly fiddling with it. On top of this, my sister in law is constantly blasting thw heating up to max when thete is no need. Being able to lock and…
Easy programming
Hi, Could an easy programming feature implemented? Like vacation: leave on ... date, return on ... date. Temperature during absence.... And quick day programming. Morning, ... °C work..°C evening...°C. I had this on my previous thermostat and it worked very easy and intuitive. Thank you all!
Pre-heat and early start for Tado X
Hello, Just bought the tado x System and I am a bit disappointed that the pre-heat and early start feature are missing. Are there any plans to implement those two features? Please implement those two features🙏 Thanks, Florian
Schedule printing
Hello, Schedules are really helpful in keeping my house warm economically and I’d really find it useful if it were possible to create a file or print the schedules for my home heating. Different rooms have different requirements because of varying uses at different times of the day. I expect others would also find this…
Y plan denergise 3 port valve after CH
The Y plan system maintains power to the 3 port valve after CH has been on (but water off/not called for), whilst 3 port valves can cope with this they do use a small amount of energy and some hum rather annoyingly. Idea: When the Tado turns off the CH it could momentarily call for the HW only to denergise the valve…
Lower hysteresis for underfloor heating
We have Tado controlling our underfloor heating but it has two issues: it's not learning and the hysteresis is too big. If I set the room to 20C then the underfloor heating doesn't come on until the temperature has dropped to 19C. It then runs the boiler until the room hits 20C but the residual heat in the floor keeps the…
Bespoke Nom Circular Geofence
Allow a non circular Geofence to be plotted. We have a park near our house that would be good to have outside the geo fence, especially when the wife and kids spend a few hours there. If I reduce the current Geofence radius to exclude the park the Tado App says it's too small.
Support multiple schedule configurations such as spring etc..
It is very common to want different sets of heating parameters for different occasions. A typical example might be a different set for summer versus winter. Or for when guests are staying versus not. It would be great if the Tado system supported the ability for user's to create multiple named configurations and switch…
[Released] Adjust support expectations; replace the bot with a form
tl;dr: Having a support chat is giving a false impression of one actually getting one-on-one, immediate support. I do however understand why tado absolutely wants people to go through the bot instead of just sending an email. So how about we compromise and everyone gets something they want… Long version: Looking through…
smaller wireless temperature sensor X with e-ink display
I just bought wireless smart thermostat X starter kit with few smart radiator thermostats X. It is connected since yesterday and works flawlessly so far. There is one thing, I changed my old immergas thermostat to tado wireless and it is so big and bulky on the wall, shows nothing if not touched, looks like little outdated…
Hot water control like in V3 - other device control i.e. Apple Home, Google Home or Home Assistant
I have found it impossible to see any control of the hot water in any of the Matter/Thread control systems. It is impossible to add the wireless controller X to any of Apple Home, Google Home or Home Assistant. The only place that hot water can be controlled is through the app, and then only with the facility to set a…
Support newer version of Worcester HT-BUS
I just upgraded from a worcester bosch greenstar cdi to a worcester bosch greenstar 8000 life. On my old boiler I could connect to the digital low voltage interface bus however the new boiler the ht-bus is not supported and I couldn't simply change over I had to rewire to the old relay style. The bus interface is better…
Upgrade tado app for more Homes, connection with external open window sensors
I have two Homes, and I installed new thermostats on tado° X radiators in my home. I have a V3 system in my company and I had to create a 2nd account. This causes complications especially with Geofencing!!! When will the new version of tado° for multihomes be available? It would be good if the tado° app could respond to…

Active

Discussion List