-
Merged: Radiator Thermostat in Black
This discussion has been merged.
-
Heat Pump Optimizer - hot water heating only once a day during cheapest hour
My hot water boiler usually only needs to be heated once a day, thanks to its good insulation. However, the current hot water optimizer heats the water during a set period, which isn’t always efficient. Although you can adjust the heating duration, it might not align with the cheapest energy hour if it’s preset in the…
-
Air Conditioning control based on dynamic energy price
Hello. For heating my home I use 3 Air Conditioning units in heat pump mode. I will soon move to a dynamic energy contract, where the costs of electricity varies per hour, depending on the energy market price. It would be very helpful to have TADO assistant adjusting the heating depending on the energy price, so that when…
-
Merged: Option to set thermostat valve always open
This discussion has been merged.
-
Merged: Weekly motions
This discussion has been merged.
-
Connessione da rete mobile 4G/5G
Ciao, chiedo se sia possibile poter modificare il firmware/software del Tado in modo da farlo funzionare anche da rete mobile, visto che funziona solo da rete Wi-Fi.
-
Quality issues
The display on my Smart Thermostat has failed after only 3 years. As its out of warranty Tado won't replace it. Having to replace one of the main components of the system every 3 years will make the system very expensive. Extremely disappointed by the Customer Service received from Tado and the quality of their hardware,…
-
Improved status and viewing
I know Tado can look at the background information on which device called for heat. Is there a way that a general log can be created and viewed in the Tado app. So if one room calls from heat and it's shown on a log, if another room detects window open, it still reports on the same log in a time order. Same goes for any…
-
Create groups and group schedules
Hi. Previous house had a Hive thermostat and one of the great things was to be able to set a vacation period. You would set an away time and date and temperature and a return time and date. For example you might set all devices to 14C for the week you are away and it returns them to the programmed schedule at the time/date…
-
Un termostato utilizzabile sia come riscaldamento che come raffrescamento, come accensione per PDC
Buongiorno, sarebbe utile realizzare un termostato che permetta la gestione sia del riscaldamento che del raffrescamento. Sempre con contatti puliti COM e NO. In modo che, in base alla stagione lui permetta di avere range temperatura da 5 a 25 per riscaldamento e da 16 a 30 per raffrescamento. Sarebbe utile semplicemente…
-
Daikin Heat Pump Compatibility
I am looking for a smart home heating solution and contacted support to assess compatibility for Tado X which states it accommodates under floor systems. Support informed me that Tado X is not compatible with Daikin Altherma R F - EHVH-CB and Daikin ERLQ006CAV3. I would suggest adding compatibility as this is a widely…
-
Make On/Off Controls Available on Home Screen
It would be more convenient if each tile included a basic on/off control to save you having to go into a new screen first. You already display a 'power' icon in the top right of each tile - see attach - make this live so that clicking it actually works. See Tapo smart device app for example where this is already supported
-
Google Home Integration for On/Off Hot Water
I have a fairly old boiler with no digital temp control. Tado supports simply turning the hot water on or off. Google Home shows a entry for the hot water but does not allow me to change its state. Tado support told me: "You have the Hot Water tile enabled in your tado° app. However it is a relay ON/OFF control and you can…
-
Introducing myself
As suggested by @samd, I am making a short post to introduce myself as the community forum’s new admin. Hello! My name is Emcee, I live in Munich, Germany and am a member of tado°’s Customer Experience team. I hold a M.Sc. from the Technical University of Munich. My thesis was focused on hydroelectricity. I worked in the…
-
Redesign internet bridge and provide longer cables.
Hello. I would to suggest that: 1. The internet bridge is designed so that the cables come from the top not the bottom of the device. This would allow the device to stand upright freely away from the wall (2 requirements for best placement) 2. I would also like longer cables to be provided for the internet bridge - the…
-
Adding Wireless Thermostat change my zone config - not right to me
I have a number of wired thermostats downstairs all working for about 6 months. Then added a wireless controller and thermostat upstairs. But all the downstairs ones had their zone changed to use the wireless controller as the zone controller and I dont remember saying this was OK, i did set up the pair of controller and…
-
Apple Carplay / Android Auto
Develop a very simple Apple Carplay / Android Auto interface to allow basic control. e.g "Resume Schedule All Rooms" "Turn Off All Rooms" "Boost Heating All Rooms". The geofencing doesn't work well for me and this would be a good alternative.
-
Multiple Wireless Underfloor Thermostats
Having moved from a single heating zone house with Tado to a new house with multiple heating zones (1 radiators + 4 underfloor) controlled by a Lightwave system. I would dearly love to convert the new house to Tado which is far superior. The only problem is that apparently Tado do not currently support multiple wireless…
-
Vertical Radiator - Towel Rails - Smart Thermostat interface
In modern houses, we now find a lot of vertical radiators - they are space savers and also act as features. In my home, I have three vertical radiators I cannot interface TADO with, its frustrating as I cannot control these rooms/areas as I can with the rest of the house. Can TADO review the interfaces and advise of a…
-
App should be able to shutoff manual settings of starterkit
For the use of Tado (starterkit) in rooms which cannot be accessed by you in person, such as; guestrooms, B&B, kids bedroom, other privacy sensitive situations, etc., it would be welcomed if the app can shut off the ability to change the roomtemperature manuallly. EG. We have a B&B and we have programmed the temperature…
-
Color of tiles
The color of the tiles is now fixed at blue/green till 18 deg and orange/red from 19 degrees. We never set the temperature above 18,5 and therefore the colors are always blue/green. It would be nice to be able to set other limits. Having different limit for bedroom and living room would also be nice.
-
Warn about two day instruction wait time with compatibility check
I've just had to change my boiler, and I followed all the Tado advice about asking for a compatibility check. I thought all was good. The boiler installer engineer was here getting towards completion. I went to the Tado app to change the boiler. Found the boiler… and it said something like "Please wait for up to 2 days for…
-
Better collaboration with Air Source heating system
I have an air source heating system in my home and the projected forecast costs are not reflected well at all with the app. I input my energy usage each month and never get anywhere close accurate costing suggestions. The data input screens are clearly for gas/oil systems, and not designed for Air Source systems. Our Tado°…
-
Heat release valves
If there would be an option on valves to setup not to close the circuit when reaching the heating point, just send the end signal to the themrostat, then there should be circuits where the remaining heat should release and this extra heat could be useful in bathrooms or other higher heet needed rooms.
-
Temporary extend current schedule
Time to time I get into the situation when I know I will work a bit longer in my work room. Currently I can do two things to extend the heating, 1) wait until the switch and then set to the same temperature as before with a (optional) time limit 2) set the temperature +/-0.5C before the schedule switching off with…
-
Pouvoir changer la température hors gel
Bonjour, J'aimerai pouvoir changer la température hors gel par défaut pour pouvoir éteindre mon installation simplement quand je quitte ma maison de campagne pour quelques jours plutôt que de devoir utiliser le sélecteur vertical de température qui m'oblige à changer également jusqu'à quand ce changement de température…
-
Use one thermostat to override all system
Hi, It would be good to set one ST or TRV or whatever that when overriding the programmed schedule through its interface (not from the app), it will override the whole system to the specified temperature.
-
Intervals dans progamming
HI, I think we should be able to get interval from monday to thursday for we not need to program every day individually. Because weekend begins when we finísh our worktime and we change our habits
-
Meer dan 10 ruimtes aansluiten op de zoneregelaar
Ons huis heeft 14 ruimtes, 20 slimme radiatorknoppen en één slimme thermostaat. We willen in alle 14 ruimtes de temperatuur individueel kunnen instellen. Kan Tado de zoneregelaar zo aanpassen dat we, zeg, 15 ruimtes kunnen besturen in plaats van slechts 10? Ik vermoed dat het ergens een instelling is. Die toch moeten…
-
2 function Programs
Hello Regarding the application, I would come up with a suggestion that could come to the aid of tado thermostat users who use control panels for actuators, for the boiler but also for the mixing groups. I propose to introduce two settings in the application regarding the use of thermostats: 1. for radiators - this should…