-
Wireless Thermostat to just heat one room?
Hello, I have a wireless thermostat installed in my living room. I installed a Tado smart radiator valve in the bedroom. When I switch the bedroom smart radiator device on, the living room radiator also comes on and heats the living room. Is there any way of setting up the system so that when I want to heat the bedroom…
-
Combine Rooms & Settings with Home Tiles
It would be much more helpful if you could see the details of the radiators and room under each tile – particularly the battery status.
-
Verwarmingsstatus in tegels ruimten
Ik zou het handig vinden als op het thuis scherm in de tegels rechtsboven de 0/1/2/3 verticale golfjes zouden staan. Dan zou het in één oogopslag duidelijk zijn te zien welke ruimte een actieve warmtevraag heeft en of dat overeenkomt met hetgeen jezelf verwachtte.
-
Allow users to set/adjust the Early Start option
Tado offers an Early Start (pre-heat) option for ‘slow response’ heating systems like underfloor heating. When used with my Air Sourced Heat Pump (ASHP) this switches on heating far too early. It would be helpful if users could set a more suitable pre-heat factor to better match different homes and heating systems. This…
-
Tado tiles a waste of an oppitunity
I am a new comer to Tado and the biggest disappointment is the app, the tiles on the Home section is an utter shambles, I find it really stupid having to go into a tile to view the inside temp, humidity and heat request (the 3 little squiggles) and the fact that no icon with in the tiles show if the radiator is receiving…
-
Per room HOME/AWAY status
I would like the ability to set a home/away status to individual rooms. That way, the main home/away status can be controlled when someone is home/away, but if a home member is away for a week say and their bedroom is set to away, tado won’t heat their room, just the occupied rooms.
-
Hot water boost
Can we have a hot water boost facility that is timed. Having to let the boiler run until its next schedule is un necessary and wasteful should you forget to stop it.
-
Worcester 8000 style
As worcester 8000 style is one of the most popular boilers in the uk. Would be great to get compatibility with ebus
-
Outdoor temperature/humidity sensor
Why not an outdoor sensor ? It would be nice to have that in the same app and also it could be used to have a better weather adaptation on locations that are not covered.
-
Allow user to turn off partial opening of thermostatic valves
The ability of the thermostatic valves to partially open allows the Tado system to better regulate temperature and avoid overshooting target temperatures. However there is an energy efficiency cost. I live in an old house where many central heating pipes travel through unheated voids in the loft or under floorboards. If I…
-
Pausing a room
It would be great to be able to pause a room. Tado is great at providing granular control of each room. But for schedules - its only possible to operate at a whole house level. Either i can turn off "all rooms" or "Boost all rooms". being able to turn off or pause a room feels like a pretty useful and essential item. the…
-
Geofencing options that activate when a single user is home/away
We have a office which is used mainly by one person. Currently geofencing only kicks in when all the users are away. It was be great to link a room to a single user, so that the home/away status would follow just that user. This would allow us to turn heat to the office on and off based on if the primary user was out of…
-
Internet Bridge better wifi compatibility and coverage with new wifi standards wifi 6E and wifi7
Internet Bridge and all Tado devices beter wifi compatibility and coverage with new wifi standards wifi 6E and upcoming wifi7. Updates for better software experience.
-
Hot water tank stat
When are TADO going to develop, and release a hot water tank intelligent stat that replaces current on/off water tank stat?. This would nicely compliment the central heating and intelligent room stats currently available, and improve the system efficiency.
-
24 hour clock
The smart schedules are set using the. 24 hour clock. However, the next event for each room uses am/pm. I know I live in the UK with its outdated time but it would be useful for users to select a consistent 24 hour (or am/pm) format.
-
Smart Schedule overview for all thermostats
It would be great if you could see something like this in the Tado app… See attached example/picture….
-
Foutrapportage - Foutmeldingen van je ketel weergeven in de app (bv. te weinig druk)
Bij mijn huidige thermostaat van Remeha krijg ik foutmeldingen zoals bijvoorbeeld dat er te weinig druk is, of kan ik zien wanneer de brander actief is. Wanneer ik overschakel naar Tado zou ik geen enkele van dergelijke meldingen meer krijgen. Zie ook:…
-
Users of different categories
I would encourage Tado to introduce users with different categories i.e. one administrator, who makes all smart schedules and other settings, one user category, who can be assigned the role as adminstrator for one room, and one user category, who is read only, but counts in the geofencing. The reason for this is that i…
-
Average temperature of multiple thermostats in same room
In a large room with multiple radiators/thermostats, it would be good to have the option of using the average/weighted temperature instead of having to choose one device.
-
Gestion de plusieurs maison depuis le même compte
Bonjour, J'utilise le système Tado pour gérer 2 logements, et j'ai été surpris lors de la création de la 2ème installation de ne trouver aucune option pour ajouter cette dernière. Après quelques recherches j'ai trouvé d'autres utilisateurs confronté au même problème, et la seule solution semble être de créer un 2ème compte…
-
Hot water boost
Hi - just installed tado radiator thermostats and a hot water and thermostat- so now fully invested in the tado system. The only thing we are really obviously missing is a 30 min, 60 min , 90 min hot water boost which then switches back to programme afterwards. Would really love to see this otherwise likely will switch…
-
Colour code on air to air pump modes
The modes on the smart ac3, is colored blue for all modes except for heating, a small thing, but in fan mode it is confusing, as it is not cooling but just transfering air, make it light green so it is different from cold
-
Set max heating water temperature from the app.
This is essential for all hybrid heat pump installations.
-
Display battery status prominently on app
I have 1 tado thermostat in a property which is sometimes left empty, and I’m generally very pleased with it. However I recently received a message informing me that the batteries were running low. It would be an improvement to have the battery status prominently displayed on the app, rather than hidden in the menus, so…
-
chaudière en sécurité
bonjour. ma chaudière électrique ortli cer s'est mise en sécurité car il n'y avait plus assez de pression dans le circuit d'eau ( circuit avec radiateur). le thermostat v3+ ne m'a jamais prévenu que la chaudière ne chauffait plus ni même que la chaudière se trouvait en sécurité. Serait-il possible que l'appli ou le…
-
Be able to name devices rather than refer to them just by number
I would like to be able to name my Smart TRVs rather than them being numbers only. It would then be easier to know which one needs new batteries when the email comes through if there are more than 1 device in a room or area.
-
Add integration with the DCC database and other Smart Databases
I have the “Hugo” app what is fully aware of my energy usage that it collects from the DCC database. Being able to integrate this plus integrating tariffs such as Agile by octopus energy into the “smarts” of the product. As an example in the summer I would love it if left over power from my solar panels or cheap off peak…
-
Geen functie/symbool gebruik warm kraanwater op thermostaat
Volgens bijgaand artikel van support heeft de slimme thermostaat een symbool voor warm water productie. https://support.tado.com/nl/articles/3387237-wat-betekenen-de-symbolen-op-het-display-van-de-slimme-thermostaat-of-de-draadloze-temperatuursensor Op mijn (recent geplaatste) thermostaat krijg ik dit echter niet op mijn…
-
Humidity notification
Tado keeps also track of humidity percentage in the room, it would be useful to receive a notification when it reaches a certain percentage so that I can open the windows and clear some hair.
-
New development idea - define a maximum upper temperature
Hi, I like very much your products and have 2 of your thermostats installed in my house. But there is one functionality I really miss ..., hence this note. You probably already thought about it but just in case, here you go: within current context of very expensive energy you certainly have customers willing to LIMIT the…