-
Alexa Humidity Reporting
This function is available on the Google ecosystem, but not with Amazon's one. Currently only the temperature is reported, can the humidity also be fedback. i could then use this to automate the extractor fans in the bathroom, kitchen and utility rooms when needed.
-
Suppress Open Window Notification if room already warm
I keep getting notifications of open windows asking if I want to turn the heating off in a room which is good. However I keep getting them while the temperature of the room is already above what I had set. This means that the heating in that should already be turned off. Would it make sense to not send the notification if…
-
Improvements to the Wireless Receiver / Programmer Cover
In the UK, many modern houses have the programmer / controller in an easily accessible place and it is not uncommon to find them on the kitchen wall about 20cm or so above a kitchen worktop. They are therefore potentially at risk of splash or dirt ingress. Many of these controllers / programmers have the cables coming in…
-
Weekly view in heating activity
There are monthly and yearly view in heating activity report. Can you add a weekly view as well to cover 52 weeks? Should be a relatively simple thing to add to the report
-
sleep at night with windows open - skip frost protection
Here in the UK overnight temperatures are often 1-2 degrees C, and I like to sleep with the bedroom window open. I suspect this fools Tado into turning on the smart TRV controlled radiator directly under my bedroom window. I'd like the 5C Frost Protection to a user definable number on a per-room basis or per device basis,…
-
dynamic offset to cure TRV inaccuracy
It's well known that TRVs are accurate for room temperature when the radiator is off, but inaccurate when the radiator is on. I'd like Tado to implement a feature where the user can set a dynamic offset, such that when the radiator is on the room temperature is offset by -9/+9 degrees. Should minimise the TRV temp problem.…
-
Radiator Maintenance Setting
I have Tado on my boiler and all of my radiators. My central heating system (combi boiler) is maintained every year by an engineer. The engineer needs to be able to turn on the boiler and for all the radiator valves to be open. There needs to be a maintenance mode in the app which simply turns on the boiler and opens all…
-
Apple Watch App
I've got quite a large Tado heating system installed on everything in my home. I've just got an Apple Watch. I get the notification when I leave home on the watch. However, I can't switch to away mode from the watch. This would be very useful (and also to be able to switch back to home mode). You definitely need to write…
-
App Bug Found - Boiler Running with Rads Off
Hi All, I found a bug in your app. I have been using Tado for 2 weeks without issue, it's great (but would love a 30min boost button per room). I recently added my wife to my home to share control. During a demo of the app, she pushed the "Boost" button and then a few seconds later clicked the "turn all off " button to…
-
Download sensor data
It will be very helpful to download sensor data to develop an understanding of the heating patterns in my house. The product is fantastic, and this feature would enhance the product tremendously. I had Beurer temperature and humidity sensors in each room in my previous house. After comparison, I was able to regulate the…
-
Bug in the way heating activity is calculated
According to Tado's app my heating system has been on for 20h per day on average during the last month, and 24 full hours the day before yesterday. In reality my boiler has been on for only about 10 minutes the day before yesterday, and the same goes for the rest of the month. The reason for this funny discrepancy becomes…
-
Heating Activity Chart
I have been looking at the heating activity chart and it is quite hard to see the usage difference due the scaling on the chart. The same size columns can be very different on low usage. It would be good if the chart could auto scale depending on my usage. It would be a lot easier to compare day in day, month on month. Do…
-
Widget for iPhone
When you swipe to the right on a iphone, you get your widgets. It would be very handy, when there is a Tado widget available. I cab nmanage sereral home application through the widgets, but for Tado I must perform extra actions.
-
Oil Tank level monitor
Would it be possible to develop a Tado compatible heating oil tank level monitor?
-
Feature To Assist With Balancing Radiators
Create a feature using the inbuilt thermometer in the radiator valves to work out order to balance radiators. It could work out time to temp for each radiator and advise you if there are any getting hotter slower/quicker.
-
[Feature Request] Apple AirTags and GeoFencing
Hi, One of the limitations of the current geofencing feature is that it is limited to own devices. This means that if we have guests at home (or back when we could and hopefully when will be able to again in the near future) or someone like a nanny and me and my wife leave the house the heating shuts down. A very easy…
-
Heat differences in a room with more than 1 radiator
I have a big living room with 4 radiators installed in different parts of the room and 1 smart thermostate. The temperature difference in different parts of the zone could be as big as 2-3 degrees but the smart thermostate is in a hotter part of the room. I would like to adjust the smart radiator thermostates offset…
-
Merge "deleted rooms" with a new room created
I have deleted a room and re-configured again due to malfunctioning radiator thermostat. Now in my "heating activity" dashboard it shows the history of this room in "deleted rooms". Is there any ways to merge this deleted room to the new one I've created so the statistics aren't disturbed?
-
Apple Watch & Mac app
Would love to see the app extended to the watch and Mac app store please
-
Be able to set max outgoing water heating temperature in central heating (CV)
In the Netherlands most people have a central gas heater which pomps hot water around in the house through floors, radiators or convectors, also called in Dutch: CV installatie. What I cannot do with Tado is adjust the outgoing hot water temperature of this central heater, via an OpenThem connection, but I cannot adjust…
-
Please use 0.5 degrees granularity in the wireless temperature sensor
Current granularity in the temperature sensor is 0.1 degrees in the app and only 1 degree in the device. That makes it annoyinhg, because the most standard granularity in all themorstats in 0.5
-
App Actionable Notification for All Off/Boost
Although the Turn All Rooms Off and Boost options are useful additions to the app, without a way to say how long this is for it is easy to forget to set back. If the Tado App had an actionable notification on Android and similar on iOS when in the Off or Boosted state, then this would be much easier for users to remember…
-
[IFTTT] Determining if tado is in Home or Away mode
Without consuming a tado trigger, the following filter code can determine if your system is in Away or Home mode by just querying the last switch to Home and the last one to Away. I wrote this because I did not find any available variable from the tado triggers/queries. I use it to skip heating up early if the system is in…
-
[Device] provide main error code detection (and alerts) for Bosch/BUDERUS EMS-BUS
I have a Buderus logamax plus gb162-35 v3 boiler with RC300 module. The boiler communicates with the EMS-BUS (Bosh & Buderus) which equips many boilers and customers. If the boiler loses pressure, Tado does not detect it and does not warn me. I would like to point out that I have to deal with the loss of pressure with my…
-
Wireless underfloor heating
Hi Tado Please develop a wireless underfloor heating device. So i dont havd to switch to Netamo or Danfoss
-
Hot Water Setting
I have a wireless thermostat which gives me a option of hot water control. I have a combi boiler and, as such, I do not use this setting. Its would be great if I could remove this from the Tado Home Screen.
-
Reduce expansions tank "delta" - Control radiator valve change speed or spread open over time
Living in the Nordic countries it's quite common (due to regulation on energy consumption for households) that you end up with some type of heat pump, to power your radiators. Many of these comes with an expansion tank as the "interface" between the pump and the pipes in your house, and is used for regulating the ups and…
-
Timed off period
Following the easing of lockdown, we have been lucky enough to get away for a few days. The system went into away mode as expected but I noticed that the heating was coming on to maintain the lower away temperature - I don't like it too cold under normal circumstances. I didn't want to heat the house at all while we were…
-
Improved thermostatic AC control
The tado device and app are well made and designed which lead me to purchasing one to try out, it is a pity the "smart" features are not quite there yet. The following features would make the product much "smarter" in my view: an "auto" mode that can switch between heating and cooling for autumn/spring periods where you…
-
Support newer version of Worcester HT-BUS
I just upgraded from a worcester bosch greenstar cdi to a worcester bosch greenstar 8000 life. On my old boiler I could connect to the digital low voltage interface bus however the new boiler the ht-bus is not supported and I couldn't simply change over I had to rewire to the old relay style. The bus interface is better…