-
Rest warmte gebruiken op andere kamer
Ik zou graag de functie willen. Als mijn woonkamer warm is. Ik de radiator op mijn slaapkamer kan open zetten. Zonder dat de cv ketel aangaat. Zodat de rest warmte mijn slaapkamer opwarmt. Mijn slaapkamer hoeft niet zowarm, maar als ik dit nu doet gaat ook de cv ketel weer aan. Wat denken jullie hiervan
-
Winter/Summer
Hi, is it possible to add a ‘switch’ in the app to change from winter to summer. This is so that ALL of the heating can be change from either "WINTER HEATING ON" and "SUMMER HEATING OFF".
-
Temperature labels
I think it would be useful to have an intermediary step in setting the schedules, one whereby I can create a handful of labelled temperatures and then assign them, or use manual temperatures, to blocks of time in the schedule. For instance, I create ‘in-use’ ‘unused’ ‘walk through’ and ‘bathrooms’ labels in temperature…
-
Sensor Map in app to support internet bridge location.
Provide visualisation in app with internet bridge in middle of map and all connected devices surrounding it showing the current state RSSI value. This will support me in understanding how to change location of internet bridge if I know that one sensor location has -30dbm, another -70dbm another -80dbm then I no longer have…
-
Multiple Wireless Receivers on one Tado account
I think it would be great to have multiple wireless receivers on one Tado account so for people with more than one zone or more than one boiler can have all the devices on one account rather than split them on two different accounts!
-
Heating Activity - Total Heating Time is wrong
If a room that is not assigned to a zone controller is the only room 'on', then Care & Protect counts this as Heating Activity even though the boiler is off. This is incorrect, and means the Heating Activity is inaccurate if there are any independent rooms set up. Please change Heating Activity to only include time when…
-
Tado IFTTT when on/off detected
When any radiator device is switch on or off I'd like IFTTT to receive that information. Many other smart devices already have this feature and for people like myself who have built a smart home hub, the ability to ping/check the status of each radiator would be incredibly useful. Right now my tado section in my own hub…
-
Please consider Tado app return to 0.1° granularity
I find the app manual temperature now of 0.5c increments to course. please consider returning the 0.1c old variation which was much better if for nothing else for saving gas and the planet if nothing else.
-
Hot Water Setting
I have a wireless thermostat which gives me a option of hot water control. I have a combi boiler and, as such, I do not use this setting. Its would be great if I could remove this from the Tado Home Screen.
-
Humidity correction
Discovered a function to set the room temperature correction and would like to have a function to set the a correction for the humidity
-
Mechanical Ventilation System
Hello everybody I‘m using your thermostat for a floor heating system and it works very well. What I miss is to tell the system that there is a mechanical ventilation system. Will there be an update to configure such a ventilation system, so I don’t get a notification to open a window? Best
-
Radiator Thermostat Hardware Lock
My bedrooms are heated via district heating, so I do not have a central thermostat that turns on or off the heating. My house can be booked by AirBnb guests. When I have guests, I am not at home. I have already noticed that detaching the radiator thermostat from its mount, is very easy to do. I would like to have an…
-
[Released] Finer granularity of temperature reporting and adjustment for Smart Radiator Thermostats
Throughout the app temperatures are reported and set in units of whole degrees. It would be beneficial to increase the granularity of both reporting and setting to half degree increments.
-
App Tile Swipe functionality
I would like to suggest adding tile swipe functionality. This would be to enable a swipe to the next device/thermostat after selection from the main dashboard. The app currently requires you to exit and select to enter the settings for another device. Retaining current functionality whilst adding the swipe to the next…
-
Temperature measuring device
For rooms where you have multiple devices such as two radiators with TRV’s or also a controller it would be great if you could select more than one device or allow Tado to use the average temperature across multiple devices in that room. In my living room, I have two radiators. Selecting one as the primary measuring device…
-
Tado app to show total amount of heating hours used for a month
This seems like a no brainer to add to the app. The info is already there if you look at the day-by-graph but it's hard work to add this up manually.
-
Notification when manual mode
I think a notification when somebody in the family select it woulf really help. Aldo considering thag Alexa and Google somtimes misunderstand pur command and change temperature without our pur will.
-
When an open window is detected add the name of the room to the notification
Could the name of the room be added to the notification text when an open window is detected?
-
Extend on/off period - temporary schedule change
I often want to make a temporary change to the schedule. It would be useful to make an adjustment just for the current state. If you could edit the time of the "next change" displayed on the room or hot water screen then this would be easy. The usual stored schedule would resume later.
-
remove the need for the Internet bridge or at least use the house wifi
I think it's unbelievable that devices have to use a bespoke wifi bridge and even limit the household to a single bridge. I have just installed the system into a Yorkshire farm house with thick stone walls. no way does the thermostat, CH controller and bridge connect. If the system used the house wifi (where I have a mesh…
-
Nursery Temp
We’re expecting our first child and have been going to NCT classes recently. We looked at sleeping conditions and talked about room temperatures. I thought it would be a good idea to be able to set temp warning with alerts for when a nursery/babies room went about a certain temp. Not that it should with Tado fitted but as…
-
Not a new idea. Just common sense
I join the clamour for the bridges to act as repeaters. I have a large 18th century house with a barn wing and two heating circuits from one, large boiler. It took me ages to get tech support to explain how to control which room linked to which heating circuit, but I did have to buy to starter packs - so I have two bridges…
-
Open window detection
So we have child lock on, on our tado radiators, since we have a one year old who loves to turn the knob like a roulette table. What I've noticed is that shortly after she's been playing with it, we invariably get an open window warning. My take is that she warms up the knob and it then cools down and the tado simply looks…
-
Outside temperature visible on room screens
As it says above.
-
[Released] 0.5° Temperature step for SRTs
tado° is excited to present our 0.5°C temperature “Step size” changes for our Smart Radiator Thermostats. Many of you who appreciate our products have asked for a 0.5°C temperature change feature and we are glad to introduce the 0.5°temperature granularity and reiterate our commitment to your satisfaction. You can now set…
-
Predefined Heating Schedules
Maybe like a gallery of predefined schedules by tado with the opportunity to download schedules from other users of the community. For example: Winter, „Summer“, HomeOffice days etc.
-
Service Mode for Boiler Maintenance, Draining and Power Flushing
Hello, It would be important to have a Service Mode setting, where: all radiator thermostat valves are fully open and in manual mode: can be individually set to fully open or fully closed boiler control is set to off and in fully manual mode: on or off any timers and automatic "return to schedule" are disabled This is…
-
Fix HomeKit support (round up of feature requests)
Hey tado, everyone seems to know better than you what your HomeKit support needs. Here I gather all the requests I have seen around: Allow temp/humidity sensors to be exposed independently. We bought these pricey TRVs. Why don't you let us use all their features? Expose battery levels in HomeKit. It is really stupid that…
-
Bypass feature
Hi all, I am a happy tado user since a few months and realized that we needed to install a by-pass in our cv system. Now I am wondering why tado does not offer the feature to mark one of your smart thermostats as the by-pass radiator. So this thermostat will never close fully, so that the pump of the CV (boiler) is…
-
Show current humidity in the main app screen
It would save a lot of clicks if we could see the current humidity in the main screen, close to the current room temperature. There is a lot of free space for this in each room square.