-
Single place to review when a boiler has been called for heat
You should be able to see within an area of the app, every time the boiler has been called for heat across all your devices. This would then show you how often the boiler is on, and therefore allow you to potentially reduce your energy consumption, and tweak the settings for your house to heat it efficiently and…
-
Mobile app should be near real time up to date
The mobile app lags significantly behind the thermostats and relevant heating systems. This makes it very confusing when the boiler is calling for heat, but the Tado app shows that nothing is heating. I've also had it, whereby the thermostats are saying 25 degrees yet the app is showing that no heat is being requested.
-
Geo/account koppelen
Om bijvoorbeeld 1 kamer aan 1 persoon te koppelen zodat als deze persoon de woning verlaat de verwarming reageert op de geo. Dan zou je het account van deze persoon/ telefoon aan een radiatorknop/pen moet kunnen toewijzen. Nu reageren allen knoppen op de geo van iedereen. Je kan alleen knoppen uitsluiten van geo. Toewijzen…
-
Area expansion for Tado acount; 2nd internet bridge for better coverage in larger housing
The Tado system can currently work with 1 internet bridge to communicate between the devices. In a situation of a larger space of multiple 3+ floors 1 internet bridge is no sufficient to communicate with all devices. In my case I have a house with 4 floors and 3 thermostats on one floor are not in range (als not after…
-
Lock openings
Hi! My termostat in my bathroom are connected at the bottom to my towel rack and the thermostat are very close too the heat pipe, so the thermostat belive it is warmer in the bathroom compare to actally temperature. So I wanted that to be possible to lock the openings on the thermostat without to check the temperature in…
-
Merged: Heating profiles
This discussion has been merged.
-
Ac and valve in same room
Can you please make it possible for ac and boiler to be in the same room and see what would be thr best energy usr to heat if for one room mostly would be beter for the ac part to take ocer the heating
-
Beta channel
I did sign up to the beta version of the App, and it would be great to be able to: See the a brief list of changes (new features / fixed bugs), so one could look closer and test it Get a button directly in the app, that would allow to provide a feedback in a form of a bug/ticket with few clicks directly from the app Unless…
-
Missing data in web-app
Hi Tado´s I really miss the fact that in your browser app there is access to the same data about operations as in your Google app. When it is found on the mobile, it means that the information has been collected about how the individual thermostats operate, heat, humidity, etc. But in your web app, keg can only see a very…
-
Go back to %%%%%
I have two wireless thermostat sensor And before I could see The percentage of use of each one Now it's got updated with a graphic That doesn't specify each one consumption If it keeps like that I won't renew the annual subscription Before if I spent €100 i could divide the expenses for each sensor now I can't Or can I ?
-
Ecran histogramme
Bonjour, j'utilise un smartphone Android . je constate que si l'option "Sombre" est activée pas de Température ni d'heure présentent sur l'écran BàV
-
Smart AC delayed start
With tado smart AC a schedule can be configured. Although this works fine it would be great if it would be possible to choose a mode, duration and set a delayed start time for the airconditioning. I do not find the smart schedule super useful since I don't have a fixed schedule wherein I use them. Therefore it would be…
-
Temperatura maxima termostato radiador
Hola, sería posible incluir una opción para modificar y reducir la temperatura máxima de 25 grados centígrados que puede seleccionar manualmente en los termostatos del radiador. Es demasiado fácil "girar" el control al máximo. Teniendo en cuenta el deseo de todos para ahorrar energía, sería bueno poder restringir esta…
-
Room layout
Hi. I have two thermostates and a temperature sensor in the same room as well as two adjacent rooms with similar setups and mostly opens door between the rooms. If one could define the room layout defining the position of each device, it could potentially help create the best distribution of the heating
-
consumption in kWh
The display of consumption should always be possible in kWh even if measured in m3. The conversion rate varies but typically only changes slowly and by country - and it could be over-ridden by the user if wanted.
-
Possible improvements to this forum
Just joined this community group and struggling to know where to post ideas. It might help if this thread (suggestions, ideas and improvements) could be further divided into: Suggestions Interface design ideas (fonts, layout, navigation, terminology, colours etc.) System logic (setting temperatures and programmes etc.)…
-
Manually pre-set times for "Away"
I don't use Geofencing as it doesn't work well for our use case (we often have baby sitters over and also we're often at family houses who live on the same street). It would be nice to manually be able to pre-set times for "Away". E.g. Set to Away mode from 13:00 to 17:00 (on my old Honeywell thermostat this was called…
-
Preheater Control
I was hoping my Tado controller would be able to have some control of the preheater on my boiler. This feature is great for quick hot water but a real energy zapper. I wanted the Tado to activate this feature as part of my scheduled hot water times, first thing, and a few hours early evening, but not active when I am using…
-
Display thermostats and smart TVR always on
I have to say I was very disappointed to find that the target and/or current temperature was not displayed on the thermostats or smart TVR. We should have the option to have it on during the day. Perhaps in a dim state as a compromise? I had a Honeywell Evohome in my previous house and it did just that. Only reason I had…
-
Pollen Forecast and Outside Air cards for Hungary
Hi there! If it's possible, please add Pollen Forecast and Outside Air cards to Hungary too. Thanks, Csongor
-
User-defined temperatures and schedules to speed making changes.
Motivation is to minimise taps and clicks to change room schedules in many real-world scenarios. All of this is just software with no implications for the hardware/electronics. Temperatures: Allow user named temperatures, eg 'Toasty' = 23, 'Warm' = 21, 'Eco' = 19.5, 'Night' = 17, "Away" = 6. These could then be applied by…
-
Heating report archives and access to more heating data.
I'd like a heating report information system that would show heat loss from particular temperatures and particular weather so it would a really easy route into changing to ASHP as you'd already have a comprehensive lot of information. The day graphs are there but you can't see more than one at a time. In the phone app you…
-
Use Room Thermostat for a room without Smart Radiator Thermostat
I have one room that has a radiator where I cannot fit a Smart Radiator Thermostat. It is a Vasco design radiator that has a specific temperature thermostat: Since this is my living room, where I would like to heat just this room in evenings, my idea was to set this open when there and turn the Room Thermostat up. My…
-
Possibility to expand options thermostat clock/ Mogelijkheid thermostaatklok uitbreiden
My feedback and question: currently it is not possible to indicate in the app that you are away for several days (for example, a week) and that it is then automatically switched to the usual schedule.That would be a big advantage over the option that is now available, where you can only set 12 hours from the current time…
-
Change your business model. Build your userbase and products
Tado, I like your products but it's clear from the forums that development is slow and users get frustrated with a lack of progress on features that should be there I feel that your business model of selling hardware to users is partly to blame here as once you've sold the kit, you have no income stream to fund new…
-
Start
Waarom laten jullie niet meteen op het homescherm de ingestelde en huidige temperatuur zien. Nu moet je telkens per ruimte bekijken
-
Central heating output temperature setting, manual pump activation and some other items.
Hi all and Tado, With winter coming up and having used tado for quite some time already we can say we're satisfied with how it works. But there could be a few "upgrades" in the app and possibilities. first of it would seem a good idea to be able to set the central heating output water temperature as well, same as how you…
-
Smart AC Control V3+ doesn't support ECO mode for Mitsubishi airco's
I am the proud owner of a Mitsubishi airco and a the proud owner of Smart AC Control V3+. I would like to move to using the Tado Application only, but unfortunately it doesn't have the ECO option which the normal Mitsubishi remote control has. Could this please be added in future releases? Thanks, Gerard.
-
Aggiornare APP
sarebbe ora di aggiornare l’app e rendere possibile avere più HOME Utilizzare 2 telefoni o dover uscire dall’app è oltremodo ridicolo e non all’altezza dei vostri ottimi prodotti, nonché una funzione ormai disponibile praticamente in ogni app di allarme e controllo remoto. Credo sia doveroso per il vostro reparto tecnico…
-
Window opening time
I am asking for the possibility of extending the time of the open window, at least for 3 hours. This longer time is necessary, for example, in a family house, where the humidity in the bathroom needs to be ventilated through the window.