-
Will it work for me?
I have the following condensing boiler Viessman Vitodens 100-W Model Number B1KC-35 I would like to change my current Hive thermostat to that of a Tado Smart Thermostat. I have the Viessman weather compensation module, but it has not been fitted due to not having a suitable north west position to locate it. Should I fit…
-
What is the maximum number of radiators a Tado Controller can work with
Apologies but this query is in 2 parts. Part 1: I have had Tado installed for a number of years. This is one controller covering all the radiators (all with Tado TRVs) in the house and they generally work fine. A couple of years ago I had an extension built to my house warmed by underfloor wet heating but the original…
-
Adapters do not fit
Can you please advise how I fit the new adapters on my valve? Can I send a picture to you? Thank you, M
-
Is temperature chart available on web based portal?
I know how to view it in the app. I am surprised I am not able to find it in the same place on the web portal though. Am I missing something or this is disable for whatever reason?
-
The basic Tado Thermostatic Rad valve.
Tado chat is impossible to get onto I'm already having second thoughts about using Tado but hoping community can answer my question. The Basic valve pack contains mains plugs. As the valve is battery powered what are the plugs for?
-
Replacing manual TRV's with TADO TRV's on a 2 Zone system
Hi, My existing set-up is: Zone 1 (downstairs) - thermostat in hallway and non-TRV radiator. Kitchen, lounge, WC, Study have manual TRV's Zone 2 (upstairs) - thermostat in bedroom 1 and non-TRV radiator. Bedroom 2, Bedroom 3, Bedroom 4, Landing, WC all have manual TRV's I have now replaced the Zone 1 (downstairs)…
-
Boiler only calls for heat from one trv
Hello, I have a bit of a weird one. My tado only seems to fire the boiler if one specific trv is calling for heat. So by this. All the other heaters with trvs will only heat up if I have set the garage to call for heatThis has only started happening in the last few days. As far as I can tell nothing has changed. Has this…
-
Improvements:
Just got refund on Hive (TRVs don’t work) and installed Tado. What I’m missing: 1. Ability to use geofencing but restrict other household app users from altering schedule etc. 2. Heating profiles 3. Grouping rooms Ie: boost downstairs but not all the bedrooms.
-
My WiFi keeps dropping out causing my boiler to cut off but it doesn’t reconnect when WiFi does wifi
It used to reconnect does anyone else have this issue
-
Problem getting boiler to start for Heating - Water works
Hi, I've just bought the Tado starter kit with wireless thermostat. I followed the instructions religiously and after setting everything up, on testing the system I can't get the heating to work. Everything looks good. All the devices are there. I have only installed the Wireless thermostat, the wireless receiver wired to…
-
Installation wiring query
Just installing my new tado, and I've got a bit of a query regarding the wiring of the receiver. My existing unit is a salus ep101 which, other than the normal L/N and earth wires, has 2 other wires going into slots 3 & 4 3 = switched live (output) 4 = 230v link from mains live All five wired come from 1 cablezl, which I'm…
-
My heating is always on!
I've come from a nest system. I've got an s plan system, with two 2 port valves. One for Hot water and one for heating. I've wired the tado receiver as instructed but now my heating is permanently on. There's no heating light on the reciever and the heating shows as off in the app. If I turn the heating on in the app, the…
-
Confirmation of Vokera compatible?
Hello, before i purchase the wired smart thermostat kit can anyone confirm it would work with my current set up? I have a honneywell wall mounted control panel/thermostat which is hard wired to my Vokera Unica 28HE combi boiler. would it be the V3 starter kit i need? and would this work to enable me to control with Alexa…
-
Worcester 30cdi combi compatibility for modulation (UK)
Hello all, Is worcester 30cdi combi capable of being modulated by tado in the UK? I am trying to decide if it's worthwhile paying more for the eu version of the wireless kit so I can modulate. I am not sure though if the boiler is compatible. Anyone has attempted it? The boiler is at least 8 years old. It is connected…
-
John Guest underfloor thermostat wiring
Hi all The project is going well for replacing out the heating system controls with Tado. I do have one question, I cannot find a working diagram to swap out a JG thermostat for a wired Tado thermostat. Has anyone seen a guide please? Thanks Sean
-
Tiles in App smaller
Hi, I'm not sure if I can post a picture, but the tiles (Room, Hot Water, Geofencing etc) in the main page of the app have shrunk to less than 1/4 the original size. They are the same width, but very small in height, so much so I can't read the text on them properly. I've just updated my app and there is no change. I can't…
-
Can anyone help me with what should go where
I started of thinking doddle this. Then I removed the cover on my drayfoss thermostat and saw an extra wire. The when I really looked at things there is no nc etc. On my old thermostat I have L N an earth and a black wire going to number 3. Can anyone tell me where they go in the tado wired thermostat? Would really…
-
Install radiator thermostats
Morning all, I got a bit giddy and ordered an additional 4 radiator thermostats without checking every radiator in the house. Turns out that 3 of them don't have the dial to regulate (image attached). How complicated is it to change this to a valve where I can then use a smart thermostat? It looks like a professional…
-
Help with what hardware/setup to have
Hello! Here's my current setup: 1x combi boiler 2x wireless thermostat (Honeywell CM927) with their 2 receivers connected to a single control unit 2x motorised valve 2 zones (one with all radiators, one for underfloor heating in the Kitchen) 4x bedroom radiators 2x bathroom radiators My boiler is in a cupboard on the first…
-
Replacing Nest thermostat with Tado
New poster on here so please be gentle! I have recently installed Tado smart thermostat radiator valves on four of my radiators and may well in time replace the existing (manual) TRV's on the remaining rads (with the exception of the one in the bathroom so that the boiler/pump has a safety circulation). So far so good and…
-
Set thermostat to off permanently
I have 15 radiators in the house, 14 of them with TRV's. I have set my tado thermostat to off at all times in the hall as the radiator there has a TRV. Is there any point having the thermostat set to on at any time if I have configured all the TRVs individually?
-
Wiring help-no name on programmer
Hi! So I managed to install a starter kit at my mum's house yesterday, it all worked first time, woohoo! Doing my own house today but the programmer/timer has no name so the app can't provide instructions. I have photos, not sure how to post them here but basically the existing programmer has 5 places that wires can be…
-
App not controlling boiler.
Hi. I set up everything. Double checked everything. Manually I can turn off and on heating and hot water but the app does not update anything. It thinks it has turned on heating or hot water but does not. Any ideas?
-
Thermostat on every radiator?
Hello, Just recently had Tado installed. Looking to get some smart radiator thermostats however most of the rooms in my house have 2 radiators. They are fairly standard rooms but just have 2 separate heaters because the rooms can be classed as spacious doubles. Also does anyone have the thermostats in their bathroom or…
-
For those that use Auto-Assist, do you think it saves you £25 per year?
I am considering subscribing to Auto-Assist. but am loathe to after spending best part of £600 installing the kit. I am a little opposed to subscribing, mainly because the technology exists already within the app, and it costs Tado £0 extra to activate it. I've spent £600, I don't really want to be tied into a…
-
TRVs not activating heating
Hi, I have a dual zone setup with two smart controllers, the TRVs are properly associated with the zone controllers but they do not seem to activate the boiler via the wired smart thermostats despite the fact that they show the bars and are calling for heat. The smart TRVs work when I set them to call for heat, they…
-
How to enable OpenThem on my Tado and turn off hot water schedule UK?
Hi everyone, I just have just replaced my Nest smart thermostat 3rd gen with Tado V3+. I bought the black edition kit from Screwfix to use the internet bridge with the thermostat and bought the EU Receiver from the Tado professional installer website. I own a Main Eco Compact 30 combi boiler. I wired the wireless receiver…
-
Tado˚ mentioned in BBC article.
Look like Tado˚ got a mention in this new article.
-
Potterton Promax Combi boiler with "Myson touch"
Hello Everyone, I have 2 Heating Zones (upstairs and downstairs) controlled by individual zone valves wired to a Potterton Promax Combi boiler. Each zone is controlled by a "Myson touch" Programmable WIRED Room Thermostat . The Upstairs WIRED thermostat is in one of the bedrooms and the Downstairs WIRED thermostat is in…
-
Wiring not as expected
Morning all, I'm following the installation instructions and after opening up the P9000 thermostat I currently have the wiring isn't the same as on the installation guide on the Tado app. Wires are going into 5 and 6 but not on the guide? Any suggestions on where I should start to look for assistance?