I love my Tado's, but as an AIrBnb host, they can give problems.
Guests turn the whole Tado and not only the top. Then the Tado is lose and can not control the heat.
I have even marked the top with black tape, and written on the top " Turn top only", but still have problems.
I have made a hardware hack that works for me, see link to pictures:
It would be nice if Tado would implement this in future products.
It is just a 3mm hole with a thread, and a small hole in the base.
Then it is up to the user to secure the Tado, to prevent it gets loose by accident.
All the best
What about a ventilation control by Tado, it would be a great feature to control the ventilation system of the room by Tado. A Smart schedule would save a lot of energy and the control could be combined with the air quality feature.
Several rooms in my house have multiple smart radiator thermostats. In the tado app this works great, you can just change the room temp and all radiators react simultaneously. In Homekit this does not work. You have to set each radiator seperately. I want to be able to group them into one control for the room.
This would work just like with Philips Hue: There you can group multiple lightbulbs into one fixture so you can control the fixture rather than the individual bulbs. In Homekit I want to set the room temp, not the individual radiator thermostats.
Why this limit of 59 min in open window detection?
I Have the backdoor for my house in the bedroom. This means this backdoor os often open for quite a long time. I close the door to the rest of the house, but I also always have to remember to switch heating off in the bedroom. SO I could really need more time allowed in the this setup. You anyway already have the setup in the app, but it's just not allowed (which is kind of weird).
Alowe lower temperature setting when using heating in thermostatic mode
when using AC control to avoid frost in summer cottage should a much lower temperaure setting be possible. E.g. as low as perhaps 8C
Text in the iPhone app is very small can hardly see it with my reading glasses. Larger size please.
When using the AC Control to avoid frost in a summer cottage should a much lower temperaure setting be possible.
As low as at least +8C. Now is +15C the lowest.
Can we have a notification when the app is calling heat and nothing is happening, indicating the boiler isn't working. Would have saved me a few hours of coldness today. Thanks
Right now, you pick a comfortable air temperature and measure air comfort against this. For me, the chosen temperature is too hot, I prefer it colder. Could I select my own comfortable temperature and have it measured against that?
I don't use and it and likely won't use it. Can't see a reason why it should clutter up my home page. Happy to have an option, but maybe just in "more"
In setting, if you lick "stats and analytics", it just takes you to a page asking you to go and check them somewhere else. Why not actually link to the stats or show them? Are you just trying to create menu items?
Love that idea, would be great.
I would like to be able to manually set my house to "home" mode even when I'm not home. This has two purposes. 1) heating the house before my arrival. I have underfloor heating which takes several hours if we have been away for a few days 2) When we have a babysitter or similar. I don't want to have to manually set each room to keep the house warm whilst we are out.
Just noticed this applies to nearly every "skill" in the app. Oh, and I didn't lick it BTW, I clicked it.
omg, that's a great idea,
2 of my tops got unscrewed last winter, and i will do it tomorrow on all of my thermostats.
Support suggested I put this here, so here we go. I am going to buy hybrid radiators that can both heat and cool a space when using a heat pump. The specific product is Jaga Strada Hybrid. They have 'regular' thermostats, but I would like to use a smart one. Unfortunatly your Smart Radiator Thermostat can only deal with heating and not cooling. Hopefully this is only a software issue.
I'm facing issues with the umidity sensor, it indicates an higher value versus the real one...(measured with other devices). It should be implemented in the App the feature to set the umidity sensor offset (as is done for the temperature sensor).
Is it possible to add some controls for Tado and IFTTT and alert with Telegram or Email?
I'm thinking something for "remote connection lost" or "entered manual mode".
I have no use for the V3+ upgrade, and I find it distasteful that something that I paid for puts advertising in my face.
Tado°, please give us an option to turn off the V3+ upgrade prompt (on the web, in the app, everywhere).
Whenever you release a next upgraded version, that has something new that we might want to consider again, you can put the prompt back (with another "go away and don't bother me again until there's something newer available" button).
I also have electric rads where it is not possible to have normal rads. Having the ability to control these via Tado would be a great addition.