-
Open thermostat with empty battery.
It would be very helpful if there was an option in the app to leave the thermostats open (perhaps with a choice of 0-100%) when they run out of power. I currently have three thermostats, one of which constantly reports that it's out of power even when it's not, and this one also runs out of power much faster, requiring a…
-
Helpful for Tado to revert to the original temp when turned back on again, not just the default 21C
As you can see from the screen shot below, on a Friday there are 7 different time / heating slots in one room - all of which may need to be turned off when occupied and then turned back on again - often on an alternating weekly cycle Ideally there would be a second Heating on/off toggle switch that works for the entire day…
-
Automatic temperature/ventilator speed for TADO Smart AC control.
A growing number of people use air conditioners (AC) to heat their houses (cheap, available, efficient). Temperature measurement is done in the AC unit, close to the ceiling of the room.This location results in poor temperature control in the room (stagnant warm air layer). With the TADO Smart AC control you can measure…
-
Colour coding for rooms heating up
Can I suggest using a different colour in the app for those rooms that are heating?
-
Enable manual override timer when 'Turn off all rooms' has been enabled
I am writing this as the 'Turn off all rooms' button looked really useful but then if someone turns up a rad it will just stay on rather than turning off again in line with the manual timer selected. For example select 'turn off all rooms' in summer and if there was a particularly cold room or cold night then anyone in the…
-
Improve "Climate Report" graph
The horizontal grid lines in the "Climate Control" history graph currently behave very inconsistently and are not very clear to work out the temperature from. There are three fixed lines, the top and bottom have a label which varies depending on the range of the currently displayed graph, but by having fixed lines, this…
-
Verbetering usercase Slimme Aircobediening V3+
Ik gebruik de Slimme Aircobediening V3+ in combinatie met een Fujitsu Airco installatie. Deze Fujitsu heeft een aanzienlijke afwijking tussen de waargenomen temperatuur en de werkelijke temperatuur waarbij de Fujitsu een tot wel 5 graden hogere temperatuur aangeeft dan de door Tado gemeten temperatuur. Doordat de Slimme…
-
hrll
safacasfvasfvasfvcasgfvsdgbsdgbsdgbsdbsdbsdbsd
-
Clearer indication of what rooms are currently heating up
Hi, I hear the heating coming on in the house and I want to know which rooms think it is too cold - as I want to see if I agree that it should be on and potentially reset their temperatures for the future. However, the home screen on the app only indicates in words "heating to...". Each room colour is set to green, amber,…
-
Daily schedules
Ability to have a different schedule every day if you want. And the ability to save the schedule to be repeated by month/season so it is easy to change betwee different schedules throughout the year very easily.
-
App display bug
I have two radiators in lounge that have linked tado smart valves. Recently, I found that one of the radiators was not getting warm. Investigation showed that the return spring on the valve pin had failed and the valve was stuck down. Because I couldn't get around to depressurising the system to swop out the valve, I…
-
Schedule by month/season
Ability to set schedules for a wider period than monday-sunday. If I cud set every day for the calendar year would be helpful/batch up months and seasons. Easier!
-
App “Advance” button
I have a suggestion for the tado app. On my old boiler time controller I had an "Advance" button that advanced the settings to the next time period and then reverted back to the normal schedule once the next time period finished. On the tado app to bring on the heating earlier than scheduled, I think I have to go into…
-
Improve reception range of the Bridge
The connection with the radiotors is often lost. The Bridge has a short range. A more powefull Bridge or a mesh system would be great
-
Preventing radiator valves from getting stuck
I have replaced my heating control system with Tado smart vales on all radiators. On my previous system there was a feature that opened and closed all TRVs at a fixed time once a week irrespective of any heating schedule in operation. This operation did not take more than a minute or two. This meant that valves not used…
-
IFTTT trigger when termostat valves open, closes or passes a certain threshold
I would like to be able to make my smart home turn off my heat pump, when the desired temperature has been reached in the house. I currently use temperature thresholds, but it would be much simpler if Tado could trigger via IFTTT when valves on my thermostats open or closes. So bacically, a trigger if room "Living room"…
-
Stop linking the password reset back to the App
If I need to change password, or have forgotten my password, the password e mail automatically links back to the app. The app then does not allow for a password reset. So you can only ask for a reset, get the link, go back to the app. The result is that you go around in circles and can’t log in or reset your password! The…