-
Selective boost
The boost all rooms is a nice option on occasions but what I’d really like to see is individual room boosts so if I’m working in one particular area I can boost the heating for a set period, say 15 mins without wasting energy heating the whole house.
-
Local control - not internet dependant
Given that other Smart Home products (Aqara for insurance) can now work without the internet, than it's about time Tado mixed with the times.
-
Extra functions V3+
It would be particularly nice to be able to have a few "free" functions in the app that you can program yourself. I have a function on my Mitsubishi heat pump that is not supported now. And if you can program a mobile phone to be a remote control, then surely it is also possible for Tado??
-
Ability to weight the heating across multiple radiators in a single room
I would like to be able to disable one of the radiators in my living room when, for example, we have a Christmas Tree in front of it and rely on the remaining radiator to heat the room.
-
ability to disable heat mode in the app, on tado smart ac control unit for ac without heat mode
ability to disable heat mode in the app, on tado smart ac control unit for ac without heat mode also ability to remove the heat mode displaying from the apple home app
-
display changes made via app or siri on tado smart ac control unit
display changes made via app or siri on tado smart ac control unit
-
mode control via tado smart ac control unit
pls allow to control cool/dry mode
-
fan control via tado smart ac control unit
pls enable fan control on tado smart ac control unit (speed and louver/swing if possible but at least speed)
-
Viesmann DHW Control - Set Temperature in ECO mode
I have Viessmann Vitodens 100-W B1kF connected via OpenTherm to a Wireless Receiver (EU) version. There seems to be a problem with DHW and I would like to share my experience after investigating and talking to Tado about it. I hope this suggestion will help others so that maybe Tado implements it. Situation Viessmann has 2…
-
Energy IQ Improvement - independent TRV
Hello, A bit of context first. I moved into a new house and went all in with Tado products to make heating easier to manage this winter. My setup is as follows: Ground Floor has underfloor water heating and 2 Tado wired thermostats (Kitchen and Living Room) Upstairs has 4 Tado TRV (Bedrooms and Bath) + 1 additional…
-
Slim schema koppelen tussen ruimtes
Zou het niet handig zijn als je het slimme schema van de ene ruimte kan koppelen aan de andere ruimte. Meestal zijn er verschillende ruimtes in een huis die op dezelfde tijdstippen verwarmd moeten worden. Is ook handig als er meer dan 7 radiatoren in één ruimte zijn. Dan kun je de ruimte virtueel splitsen op deze manier,…
-
Show the wireless receivers ON/OFF graph
A single TRV can call for heat all night. And the only way to check that is to go into every single TRVs graph. Which can be many!
-
Show an overall ON/OFF graph
Show and overall ON/OFF graph that shows all thermostats. So that you can see what has been calling for heat. It will help with optimizing the schedule.
-
One-off schedule
Hi, Would like to be able to overwrite the programmed schedule, but in anticipation. Ie if I know that tomorrow morning I will have to wake up 1hr earlier than usual, I'd like to preschedule my heating to go on 1hr earlier, but not have to adjust my regular schedule as it's for 1 time only. Right now, I'm only able to…
-
Hot Water button irrelevant
Hi, I'm using a separate boiler for my hot water (heat pump), not connected to the burner I'm using for my heating. As such, the hot water function is irrelevant and I would like to make the button disappear from my home screen. I also had to create a schedule for the hot water to be "always off". It would be much simpler…
-
Sunday Mode / Home Sick Button
When a person is off sick or the family are home during Monday to Friday the room schedules have to be updated individually. A new button like boost heating but labeled Sunday mode or sickness emoji will default all schedules to Sunday for x number of days. The button should deactivate when you hit reschedule button
-
Multiple Internet gateways
My Internet gateway failed to get a reliable signal to a radiator valve through a single wall. Can we have either multiple gateways or use the normal house WiFi instead in order to fill in dead spots?
-
My experience of buying Tado
I am truly amazed how easy and straightforward it was to swap over my existing system to the Tado Starter Kit V3+. Right from the start, after scanning the QR code to download the app, making an account and preparing for the installation, this was a very well illustrated, easy to follow installation process. Once the right…
-
How to improve tado? Hint - it's not product development.
I've been a tado user since its UK launch, running a v1 product that over the last decade, has been pretty stable. My own tado experience? Meh, it's a central heating thermostat, and it almost always does what it's supposed to do, and pretty well too. So why have I still not installed the replacement v3+ I bought over a…
-
Relay modules (1/4/6 channel)
Now, if we vant to create heating zones (with a pump or Underfloor heating manifold), it need a wired thermostat each zone and same number of wireless temperature sensor. It really expensive and we need buy a device that we not use 90% of it abilities... (wired thermostat, we use it a simple relay mode, not measue…
-
Boost heating - timer
Boost Heating - timer Can you please add a timer for the Boost Heating Timer to the application? example. it's not so cold at night that I want to heat the whole night, the heating is set to off, but I would like to turn on Boost Heating for 30 minutes at three in the morning, for example, and then switch the heating…
-
Network Strenght
A way to see the network strength for the thermostates in the app would be nice.
-
Ticket system for support
Have searched but only reference I can find is someone who suggested but it was never actioned. Issuing a ticket works well on other sites and enables tracking of a question. I made request for support days ago and received no response. Only means I have of chasing this is repeat the original request. For me the present…
-
Inputting heating bill for oil kerosene top up.
Is it sensible to firstly input the previous year's oil consumption and average price before we input the last heating bill. Do we use units ie is a unit a litre. Oil is 10kw/litre or is a unit a kw? What's anyone else doing? I have asked via the bot but not got an answer yet.
-
Dual SRV Offset
I know that the Smart Radiator Valve offset issues have been discussed extensively but I would like to offer my 2 cents. In one of the rooms in my apartment, I have a tado SRV installed and I also have a room thermometer. I check their measurements from time to time and when not heating they are very close to each other…
-
Disable Away mode when thermostat is scheduled to Off
When thermostat is scheduled to Off and I leave home, it switch to Away mode and start heating when temperature is lower than set in Away mode. This is the wrong logic for how this function works. When the schedule is set to off, the thermostat should not turn on when I am not at home.
-
Names, notes and status
It would be useful, at least to me, to be able to give a name/location note to each individual Smart Radiator Thermostat and I would also like to be able to see the open/closed status of each SRT.
-
Location based on wifi network
At the moment the location is based on geo location of your phone. Wouldn’t it be nice to have the option of basing your location on when you phone connects to your wifi network? Or at least give you the option to pick between those two option
-
Font sizes on Home screen
font sizes for room names and temp settings too small - seems to me there's enough space to make them more easy readable.
-
Expose the Tado Smart Radiator Thermostats sensitivity setting in the app.
I have multiple Tado products. Also, I have 5 Smart Radiator Thermostats; they only work if the heating is at max and the heating flames are at 3. I spoke to support and they told me that they could make a change in the setting to the Smart Radiator Thermostats and set the sensitivity to low so that when heating is showing…