-
remove the need for the Internet bridge or at least use the house wifi
I think it's unbelievable that devices have to use a bespoke wifi bridge and even limit the household to a single bridge. I have just installed the system into a Yorkshire farm house with thick stone walls. no way does the thermostat, CH controller and bridge connect. If the system used the house wifi (where I have a mesh…
-
Polish menu
Hello, can you add Polish to the application, I would be very grateful and other Poles too
-
Monitoring of Connectivity
Useful if the app could monitor connectivity of the Tado Internet Bridge to both he internet and Tado Cloud and notify the user if there is an issue
-
Advance Programme Setting
Hi I have my heating system set up to come on at a specific time. Sometimes I get home early and want to turn the schedule on rather than wait for the schedule to kick in. At present if you boost the system ALL the radiators come on. Turning them on individually is a pain I have contacted Tado and there is no way around…
-
Smart home connections..
There are two things I would like access to from Hubitat and/or Alexa. Preferably Hubitat. 1.Home or Away settings, both to change and monitor 2.Device calling for heat from boiler.
-
Suppress Open Window Notification if room already warm
I keep getting notifications of open windows asking if I want to turn the heating off in a room which is good. However I keep getting them while the temperature of the room is already above what I had set. This means that the heating in that should already be turned off. Would it make sense to not send the notification if…
-
sleep at night with windows open - skip frost protection
Here in the UK overnight temperatures are often 1-2 degrees C, and I like to sleep with the bedroom window open. I suspect this fools Tado into turning on the smart TRV controlled radiator directly under my bedroom window. I'd like the 5C Frost Protection to a user definable number on a per-room basis or per device basis,…
-
Heating Activity Chart
I have been looking at the heating activity chart and it is quite hard to see the usage difference due the scaling on the chart. The same size columns can be very different on low usage. It would be good if the chart could auto scale depending on my usage. It would be a lot easier to compare day in day, month on month. Do…
-
Timed off period
Following the easing of lockdown, we have been lucky enough to get away for a few days. The system went into away mode as expected but I noticed that the heating was coming on to maintain the lower away temperature - I don't like it too cold under normal circumstances. I didn't want to heat the house at all while we were…
-
Symbolic names for temperatures
I tend to use the same temperatures on different rooms, eg, 21, 18, 15, 5. These are input manually and sometimes I make mistakes. It would be good if I could set up names like warm 21 cool 18 cold 15 freezing 5 and use these as alternatives for numbers.
-
Increase number of heating devices per home
Hello, 25 heating devices are not enough for larger homes, such as mine. My home has 18 radiators controlled by three different thermostats. This means that if I want to use Tado radiator valves with Tado Wireless temperature sensors, 25 heating devices per home is not enough. Please increase the limit to 30 or 35 heating…
-
Graph layout
Hi Tado team, I have graph idea for ease of view, when the graph for heat and humidity is showing you can view previous days by sliding left and right, the update idea is to view the other locations by scrolling up and down instead of coming out of the tab.
-
Locking Schedule and other parts of the system
Hello, I have a system with 6 rooms all on different radiator controls, in my house, there are 4 people who have access to the app to allow them to turn the temperature in a room up or down and who are part of the Geo-fencing for the heating. The only downside of providing them with access to the Tado App is they can…
-
Open window detection - globally turn off the heating.
It seems silly (at least in a small-medium sized semi-detached house) to have the central heating still running when Tado has detected an open door/window. It may close the valve on the radiator(s) for the room, but the heating is still running throughout the property and as such wasted energy. Would like the option to…
-
6 months subscription pass
Hi tado° team I’m wondering if you will ever offer a 6 months plan to match how long the hearing season lasts. Yearly plan wouldn’t be used for a good half of the mine and monthly plan would risk to cost a hefty 50€ if you forget to deactivate it what about a 14,99€ 6 months plan? thanks
-
Ability to remove and add a Tado thermostat without resetting HomeKit setup.
May I please request an enhancement request for not requiring a reset when adding and removing Tado thermostats? For example, IKEA Tradfri doesn’t require me to reset my HomeKit setup when adding or removing devices. I have many HomeKit automation and scenes which mean adding and setting up all the tado devices is…
-
Update from the tado° Heating Installation product team about the Zone Controller Feature
We would like to share some of the smaller product improvements that the Heating Installation product team has been working on. The primary reason is to get feedback from our community to see if certain features are clear or if more clarity is required. As the Heating Installation product team we mainly deal with the DIY…
-
Heating history in web site
On the Android app I can see the heating, temperature and humidity status history of a specific room. On the PC however I can't. It would be nice if this feature was available from the PC as well.
-
FIRMWARE FEATURE - temporarily adjust temperature on thermostat within SCHEDULE mode
PROBLEM If you have Tado running on schedule mode (house icon) and you want to adjust the temperature only temporarily, you can do this via the app on your mobile phone. However, this means you always have to get your mobile phone, go into the Tado app etcetera. Others (guests) cannot do it either. REQUEST Tado user…
-
Allow reduction of maximum temperature
Some in my household can't be convinced that manually setting the heating to 25degrees doesn't speed up the heating. I want to be able set the maximum at 22degrees, so it doesn't get set to 25 and forgotten about.
-
Please increase the number of rows supported to 12 (or more)
In my home, which is not exactly a mansion, I have 11 separate 'rooms' each of which needs separate temperature control (each has its own heating source - a radiator - controlled by two). Unfortunately Tado only allows a maximium of 10 rooms currently and so I have had to combine two rooms into one 'composite room' with a…
-
Data Logging Overlay
It would be great if I could overlay all the temp / humid readings I have on my system on a single display rather than having to keep switching between each device.
-
TADO INFORMATION UPDATES
For those interested in Tado I believe that it would be good to be able to subscribe to ad-hoc email updates on things Tado related that Tado are open to share with their customers - whether that be firmware updates, hardware updates, press releases or collaborations with other companies etc. If there is such an option or…
-
improve Care&Protect by reading bus-codes (OT)
care & protect is currently not reading out bus codes which display the error codes on my heater/boiler (Nefit Proline HRC24 - OpenTherm). In my recent case this led to low system pressure which I was not aware of and could damage the heater. luckily I found out quite early. Despite the heating request to the heater, the…
-
Multiple homes
Hi, I am commuting on a weekly basis and decided to set up my secondary home with tado° as well. However, I quickly realized that there was no way of handling multiple homes through a single account and as my account features (such as auto-assist) cannot be set up for an additional account this really minimizes the…
-
Simple UI improvements
Great system, nice app. Here are my suggestions on how you could improve the user interface (UI) in the mobile app for better usability and utility. In order of impact to the experience: Show humidity readings for each room on the Home view tiles - this would give more utility than the current solution - having to tap down…
-
3rd party temperature sensor support or cheaper add-on temperature sensor
I have multiple tado radiator thermostats, but all of them are a couple of degrees out with the actual temperature. I use an Aqara temperature sensor to measure the actual temperature in the room, further away from my radiator. It would be great if the tado app could use the data of these aqara sensors to measure the…
-
Mesh system
I have a very long house with thick stone walls so the internet bridge cannot reach all my radiators. My internet system uses a mesh system to get WiFi to all areas of my home I was hoping that this type of system could be used by tado to solve my problems.
-
Create more scenarios
Please create more scenarios than just “Home” and “Away”. Note how Philips Hue do it. Eg being away for just one day make you want to turn down the heat less than being away a whole week. Not having this option means you have to adjust the “Away” scenario all the time to fit your needs
-
tado° transparency time slots dark mode (ITA: tado° trasparenza fasce orarie modalità scura)
EN: The new graphic design of the temperature graph is beautiful, but there is a small problem in the dark mode. In fact, the shade of the vertical bands should be proportional to the heating intensity, as happens correctly in the light mode; but unfortunately, this does not happen in dark mode. Since in dark mode the…