-
Notificación al móvil en caso de encendido/apagado de calefacción
Una sencilla forma de saber si se ha puesto en marcha la calefacción en nuestra casa (o en una estancia de ella) a través de una notificación al móvil (tira o globo) especialmente si nos encontramos fuera de nuestro hogar. Igualmente se podría notificar apagado de calefacción. Estas notificaciones podrían activarse o…
-
Humidity visualization and routine with modality home, away
It would be useful to have an indication of the humidity directly on the room box to have an immediate idea of the environmental well-being. Also on the environmental well-being box to have a summary of the situation without clicking on it. It would be useful to have the possibility of programming the "home" or "away"…
-
Home planning quiz
I have just installed a heat pump and I know I will need a heatpump optimizer, but I don't know if I need a Programmer with Hot Water Control also. It would be useful to have a way to get the best possible solution for one's home based on a quick quiz to design the right system for one's home
-
Don't recalibrate smart radiator thermostats at night
I think I'm slowly getting used to the sound of the radiator valves turning on in the morning. But in the middle of last night I was woken up by the one in the bedroom doing a full on/off cycle - presumably a recalibration? Maybe following an update? I could hear other valves in the house doing a full cycle afterwards,…
-
Note Option
I would find it really useful if there was a note field for each device. When changing batteries if I could record when I actually change batteries it would help understanding how long they last before replacement - could obviously also be used to record any other useful info.
-
Merged: Features Tado X Early Start - Profiles Scheduling
This discussion has been merged.
-
Global slider to adjust temperature within schedules.
Could we have a global setting to increase or decrease the temperature asked for by the TRVs whilst in a current running schedule. For example I have a current schedule running for beginning of Autumn here in the UK, but sometimes it's colder than expected or even a bit warmer than expected. The ability to adjust a global…
-
Adjust support expectations; replace the bot with a form
tl;dr: Having a support chat is giving a false impression of one actually getting one-on-one, immediate support. I do however understand why tado absolutely wants people to go through the bot instead of just sending an email. So how about we compromise and everyone gets something they want… Long version: Looking through…
-
All room graphs in 1 place
Please offer either a consolidated graph for all rooms, or an easier way ('next, next, next...') to browse the room graphs. Currently it's tedious to exit each room page, enter the other, tap the graph icon; repeated x times.
-
Boiler Immergas compatibility with digital bus
I just bought an immergas victrix extra 32 boiler and found that it is not compatible with the digital bus and I had to connect it to the on/off relay. can you make it compatible please? Thank you
-
Added functionality to TADO SMART AC Control - Panasonic 8/10 degrees mode missing
Hello TADO, Please make an update to your current offering so that you can utilize this functionality on Panasonic air-air heat pumps. This useful feature 8/10 degrees feature is built-in to the heat pumps and is available on the standard remote control. I am convinced that a considerable number of TADO users in the Nordic…
-
Automating Home/Away process
Apologies if this has been raised before but I couldn’t find a reference. When setting the system to “Away” provide an option to revert to “Home” either by setting a future date (preferred option) or at least by giving the number of days user will be away. This would save user forgetting or if out of internet connection…
-
Which Room is Requesting Heat
Tado is full of so many great functions it's hard to debug your setup when fine tuning your settings. It would ge great to see a page that shows which rooms (that are assigned to the boiler) are actually requesting heat - knowing what the system is doing and not assuming what is occurring. This would support my efforts in…
-
External thermometer for tado.
Do taxi make an external thermometer that links in wth the tado app? If they do, I can't find one. It would be very useful if I could remotely monitor the outside temperature as well as the inside temp.
-
Tado X suggestions
(I originally messaged this direct to Tado but they asked me to repost it here.) I have read that currently your Tado X heat pump controller supports only some makes of ASHP as of yet but based on customer requests you will add more. I am therefore contacting you to suggest both Samsung Mono HT Quiet, and Daikin Altherma 3…
-
Heating
Todo app is telling me I’m useing more than I am
-
Hide Tiles
On the homescreen there are tiles that I never use and would like to hide. It would be nice to be able to hide the following tiles: auto-assist, air comfort, energy IQ, Care & Protect.
-
Valve moving when out of heating season
It's usual that the long pressed valve needles are stuck. If the valves move them on a setupable time period (daily, weekly, etc) this should be avoidable.
-
Fault detection if no temperature change detected
If a room has an temperature increase demand but there is no change in temperature for a given time period a warning should be triggered by Tado. My boiler has an issue that it needs resetting Every soften I only find out after an hour so after i get cold. That the system is not working. But the Tado ‘care & protect’ tab…
-
Volledig open, volledig gesloten instelling
Beste Tado, Het zou zeer handig zijn om een kleine instelling toe te voegen aan de instellingen voor de slimme radiatorknoppen. Namelijk een instelling dat hij volledig open gaat als er warmte vraag is, en volledig gesloten gaat als er geen warmte vraag meer is. Dus een instelling toevoegen voor niet stapsgewijs inregelen,…
-
Temperature cap by room
Can we please have the ability to set a cap on target temperatures by room on the app
-
Meter readings
Around 18 months ago we had our electricity meter changed to a smart meter. The TADO problems that followed were : 1, it wasn’t possible to enter the meter readings for the new meter so I had to calculate how many kWh we had used that day and add it to the original meter reading. 2. This manipulation worked well until the…
-
Intelligent Climate Control Device V3+" as an External Temperature Sensor for Thermostatic Valves
The "Intelligent Climate Control Device V3+" should be able to be associated with the same room as a thermostatic valve and be chosen as the reference for the external temperature. This can be done similarly to how it is done with a second thermostatic valve, an external temperature sensor, or the thermostat. If present in…
-
Ability to limit heating level for each room or each thermostat
It’s usually lot of waste of heating when heating is on level 3. Tado is not able at effectively run preheating economically. Its ability to learn this effectively gets complicated as the many things affect this such as X if room door is opened or not, or how often door is opened/closed. The temperature outside the door. X…
-
Setting for degree of valve opening +/- smart opening relation to number of active zones
When valves open a tiny amount in a single zone they are noisy I would like to be able to set a minimum opening value. This would largley solve the issue but i'll go into it in more detail as I have a more elegant solution as well. I have tado valves on every radiator and if only a few zones are calling for heat then the…
-
Black Wireless Temperature Sensor Stand
Tado do not make/offer a black stand for the black temp sensor. I don’t understand why not but would suggest that’s an obvious (though minor) omission from their range. I have sourced a 3rd party stand on eBay and it’s very good but would have bought a genuine Tado if it was available.
-
Zone controller assigning in API or create fireplace mode in TADO app.
So my problem is i can not control the zone controller from the tado API. I use Home assistant and would like to have the abbility to create a "Fireplace On" switch (in Home assistant or in the TADO app) that will toggle the zone controller for selected rooms. I have TRV's on all my radiators (except 2 bypass radiators).…
-
Tado energie-zuinig?
Tado presenteert zich als de oplossing voor teveel energieverbruik. Alleen de temperaturen die jullie adviseren (de voor-ingestelde temperaturen, maar ook die geadviseerde temperatuur in de tab klimaatcomfort), zijn hoger dan de in nederland geadviseerde 19 graden. Lijkt mij niet erg energie-zuinig. Als bv mijn woonkamer…
-
Comfort setting rather than temperature
As an option, why do we need to set a temperature at all? Why don't we set air comfort instead. I really couldn't care what the temperature is per room, the figure is irrelevant to me, I just want it to be "pleasant" in each room. Given the temperature to achieve "pleasant" can change depending on humidity etc it would be…
-
Better preseve room temperature
I noticed that tado is not good at keeping a stable room temperature. Instead of turning the heating on in advance while temperature is dropping close the level, it turns on when it’s just below. But that will be too late and thus after some time it increases the power to get the temperature higher which is waste of…