-
2 function Programs
Hello Regarding the application, I would come up with a suggestion that could come to the aid of tado thermostat users who use control panels for actuators, for the boiler but also for the mixing groups. I propose to introduce two settings in the application regarding the use of thermostats: 1. for radiators - this should…
-
Add dates and times when not home
It’d be great to have an option to add future dates and times when you know you’ll be leaving home in the morning, so that the system doesn’t start heating full on. Since that’s not the same everyday, it’s hard to get this into a standard schedule.
-
EnergyIQ: Reminder Notification Preferences
Hi, Hopefully not the biggest amount of work for this one: It would be nice to be able to define “when” you want to get notified from Tado to submit an energy reading. For weekly notifications it could be specifying a day of week, for monthly a day of month, for quarterly or yearly selecting an initial date that…
-
GJ unit in Energy IQ
For district / city heating the bill and meter readings are in GJ. It is very annoying to have to manually convert the units. Should be an easy fix: 1GJ is 277,8 kWh or 31,6 - 32,68 m3 gas.
-
Improve calibration by requesting heat
When no heat is requested, the pressure in the system can be so low, that the radiator valve pin does not spring out fully. This can result in an E4 error, or invalid calibration. This can be manually resolved by enabling boost heating before mounting the smart radiator thermostats. However, I suggest that the Tado…
-
Manual Home Placement for Geofence
My GPS is behaving a little bit funky, and the Tado App doesn't set my Home correctly in the Setup Procedure. Thats why I would like there to be an option to manually set the home location.
-
Voice assistant missing command
A command to restore the schedule both by room or whole system is vital. I keep forgetting to manually restore at night and wake up to cold or too hot rooms. This command could be used as part of a 'goodnight' voice or timed routine.
-
Tado away/home iOS shortcut action
Hello, Tado is somewhat compatible with HomeKit using sensors/thermostats individually, but this is not great to create automations. It would be very useful to have a Tado shortcut action we can use in our scripts to set the current mode to be away or home, so we could create automations based on that. This would be…
-
Become truly environmentally friendly
Tado speaks about being environmentally friendly but my radiator thermostat broke. The resolution is to share a receipt and they ship me a new one (across multiple countries) and then I return mine (again across a long distance) I was told Tado does not have a repair department which begs the question of why it cannot be…
-
Small bug in heating activity graph
There is currently a bug in the activity graph after a temperature target is changed via Homekit (in this case specifically Siri). The activity graph fails to show the correct categorisation after the system reverts to the current schedule (its set to revert any manual changes), or an away state. The following screenshots…
-
A reduce heating button
Much like the boost heating option, it would be nice for an option to reduce the heating for a set amount of time. Sometimes I find myself doing housework and then the house gets too hot. I only have the option to turn the heating off and then remember to turn it back on again. With the reduce function I think it could be…
-
Ability to use AC thermostat as a sensor to radiator valves
I have an AC thermostat and a radiator with tadoº valve in the same room. Cant' understand why can't we use the AC thermostat as a sensor for the heating radiator. Should not have to buy an extra sensor for the room temperature. The AC thermostat already does that.
-
Geoloactie werkt niet als je langere tijd dichtbij van huis bent.
Ik ga van huis, uit logeren. Maar niet verweg. Ik wil tot een datum/tijd dat het HELE huis op een bepaalde lage temp staat. Want, het probleem is dat ook als geolocatie op zeg 5 km zet en je bent 15 km ver weg. Dan denkt Tado “die is niet ver weg, en dus zorg ik dat het huis niet tot de minimale temp afkoelt.” Dus dan moet…
-
Feature request: consider central heating schedules
Hi there, I live in an apartment block with a central heating boiler. It does not run 24/7. There is a schedule that can vary every year or on special circumstances. I believe this is a very common situation in Spain, maybe not so much in other countries. So I cannot have the heating on at any time I choose, but only…
-
A Pause Button… with Adjustable Duration
I would like to suggest a Pause button… Similar to the Boost button but with the opposite effect. Or add a time restriction to the Off button. With the weather so variable there are times when the heating just does not need to come on if one of the rooms drops 0.2 degrees below the target temperature. With temperature…
-
Set temperature for selected rooms shortcut
It would be useful if I can select the rooms fast where I would like to set a temperature for the next hour other than doing it individually. Thank you,
-
Active / Inactive rooms fast switch
I wold like to include a fast button for each room within the main view to mark that room as 'active' or 'inactive'. That way you can switch on/off the room you are currently using with a click. This would be nice.
-
Time block call for heat option
In the room time blocks, provide the ability to choose at different times whether thermostat calls for heat, or operates in passive mode
-
Smart AC Control V3+ / Setup Quiet Mode
Dear Support, It would be a great plus for the product tado smart ac control v3+ to support quiet mode. The controller already supports fan control and adding this feature will provide the benefit of completely giving away the hard manual controller of an older air condition. Maybe a generic mode could be added for the…
-
modo frio para el termostato
Actualmente tengo un sistema de suelo radiante/refrigerante y necesitaría que los termostatos tuvieran una función de frío para poder usarlo tanto en invierno como en verano. Esto ya se lleva pidiendo durante años en el foro Tanto en ingles:…
-
Lowering frost protection or turn it off per device
I have a conservatory attached to the property and the temperature can go down as low as 3 or 4°. A useful feature to be able disable frost protection for this area or choose a lower level for frost protection, such as zero.
-
Some Suggestions
Tadoº Ecosystem Ability to use AC thermostat as a sensor to give temperature readings to radiator valves or the radiator thermostats (this is a big turn down). On the App (iOS) System: Ability to add shortcuts to iOS system, allowing to activate Boost Heating, Resume Schedule, Turn Off All, more easily. Geofencing: ability…
-
Timed override for geofencing
Would be good to have a way to override geofencing (to home or away, from auto) for a set period of time - like the timed manual override for TRVs. I manually override geofencing to ‘Home’ so that heating stays on for babysitters when I leave the house. But then I have to remember to turn back to “Auto” when I get home.…
-
Plieger
Goedemiddag, Wil toch even reageren op onderstaande mail van jullie. Misschien dat jullie er iets mee kunnen?! Ik heb een Herz adapter M30 inwendig naar M28 uitwendig gekocht waar een messing sukje bij zat wat over de pen van de kraan past. Ik heb enkel het messing stukje op de en gezet en….. tadaaa, de Tado knop werkt.…
-
Visitors pre-set
It's probably been suggested before but I'd love a preset for certain rooms so you can quickly switch between occupied and unoccupied. For example we have 2 X guest bedrooms. When visitors come it would be really helpful to have a preset to quickly switch the heating schedule on just for their rooms. When unoccupied we…
-
Heating Manual Adjustment Notification
We have multiple people in the house and it would be handy to receive a notification when the heating is manually adjusted from the schedule.
-
Raam open
Ik wil zelf kunnen aangeven dat de raam open staat. Hij detecteert niet dat het open staat. Als ik zelf opgeef dan wil ik ook tijdsduur meegeven voor hoelang ik denk dat het raam nog openstaat
-
Schema - zomer / winter
Wanneer het winter wordt, wil ik overschakelen van een “zomer” schema naar “winter” schema ipv alles moeten aanpassen
-
Extend open window time
Is it possibile to extend or to modify the open window time? So when you are doing the spring cleaning or leaving the window open due fry smell (in the kitchen) leaving longer then 15 minutes? And having a smooth warm up after the windows are closes
-
Heat transfer profiles to choose from
My old Honeywell thermostat had 4 profiles I could choose from. Each profile represented a different type of heat transfer speed. For example, hot air heating is a quick heating method. Convector heating a slower one. Both have their cons and pros. What currently happens is that when you use the Tado thermostat for hot…