-
Account
Vorrei suggerire l'opzione di avere nell account app tado un amministratore che abbia solo lui la possibilità di impostare i parametri dando la possibilita ad altri utenti della casa solo di attivare e disattivare termosifoni o condizionatori in modo che non vengano modificate impostazioni o cancellati dispositivi in modo…
-
Fenster offen bei Fußbodenheizung
Hallo, ist es nicht sinnvoller bei der Fenster offen Erkennung die Temperatur einer Fußbodenheizung runterzufahren anstatt auszuschalten? Eine Fußbodenheizung braucht doch ewig bis sie wieder anspringt?
-
Opening of Tado to other home automation systems (JEEDOM)
Hello, Thanks to the thermostatic heads, I have a temperature and humidity sensor in each room of my house I would like to be able to use this data to manage the speed of my VMC via my Jeedom home automation system A connectivity with Jeedom for this would be great (local API ?) Thanks Pierre
-
Worcester Bosch Greenstar 4000 System GR4700iW 12 S NG system 12kw
I am planning on purchasing a new system boiler, Worcester Bosch Greenstar 4000 series 12kW its got some very good green features of being able to modulates down to 1.9kW central heating output. I also plan to have a 250L unvented tank. https://www.wolseley.co.uk/product/worcester-greenstar-4000-system-12kw/ The Worcester…
-
Choose if you want TRV to turn boiler on
I would like to have the ability to disable a TRV turning on the boiler when room temperature drops below its setting. This would allow service engineers to flush the heating system without the boiler being turned on. It would also allow the TRV to act in “dumb mode”, stopping a room from over heating but stop it being…
-
Modalita away programmabile
Modalita away programmabile giornalmente come avviene per la modalità home
-
Black cover plate
You cannot buy a black cover plate, perhaps there are more people who would like it and maybe then they will get them on the market
-
Better block temperature indication in the schedule.
I thought it was great that the schedule had blue blocks for when I wanted it cold (at night and while at work) and orange blocks for when you wanted it warm, nice and easy to see what's going on. But then I saw that the warm block were set to 25 and thought that was ridiculous, so I set them to 18, and suddenly it's all…
-
App colours based on heating on or off
It makes no sense to have the app colours be based on a subjective assessment of the temperature the room is set to. It would be far better to have the colours change from, for example, green when at temperature and not heating and orange when heating. When I look at the app, I want to know quickly which rooms are heating…
-
Child locks for all devices
It would be good to have child locks for all devices, wireless thermostats and wireless AC controls. Wireless AC controls need to be fitted to make them smart but ideally want them to not be manually controlled by the occupant
-
Option for room thermostats not to trigger boiler
Please make an option for your smart stats to just behave like a stat, with the heating controlled by the main house thermostat. I bought 2 room smart thermostats for less frequently used rooms, set their profile to a lower temp to save energy, but when the rooms get cold first in the night (because they were colder in the…
-
Allow Tado App to display independent Temperture readings
I don't want to put a £70+ tado device with a IP20 or IP30 rating in my 99% humidity Bathroom, but I would like to be able to see the reading from a (much cheaper) none Tado Alexa enabled measurement device. Can this skill be added?
-
Boiler constantly on not turning off when temp reached
Hello, I have just set my Tado v3+ wireless system up to my baxi 105 he boiler and the problem I have is the central heating is constantly on. I have capped the old thermostat as to the instructions and wired the receiver to the boiler as to the instructions. So currently I am running off my old timer system. If I ask the…
-
IFFT Fan Speed Selector
Is there a reason why selecting a fan speed in IFFT isn’t an available option. It has a drop down menu for it however just states “no fan speed options available”. Is this something that will be offered eventually?
-
Auto turn off and reset of smart thermostat
When a smart thermostat is on during its timed schedule and it loses connection to the bridge. Can it be written in software to automatically shut the valve and to reset it. 1. So it doesn't continue to heat the room without control. 2. The reset allows it to reconnect to the bridge automatically. The fact that the…
-
(Slim) gebruik van de maximale keteltemperatuur om gasverbruik significant te verlagen
Het algemene advies is om de temperatuur van de CV ketel zo laag mogelijk te zetten omdat dat het efficiëntste is. Ik zie dat Tado daar niet automatisch gebruik van maakt omdat de opwarmingstijd van de kamers veel korter is als de maximum temperatuur van de CV ketel hoger is. Ik heb dit getest met temperaturen tussen 55 en…
-
App update notes
Hello, my suggestion is to make a visible note what is new in the new versions, because I download it but i don't have time to explore the whole software for new features. Also it is going to be wonderful if the app checks for updates by itself, because many users don't have autoupdate enabled in the Play store. And I am…
-
Connexion wifi avec ac control v3+
Il serait intéressant de pouvoir commander et régler en Wifi les climatiseurs connectés plutôt ( ou en plus) de l infrarouge. Cela affranchirait les distances et le positionnement difficile du TADO pas forcément en face. Exemple Toshiba Haori connecté qui utilise l appli Toshiba Home.
-
Open raam detectie aangeven per ruimte / show open window detection per room
Ik heb een oude grote woning (1895), waarbij de tado app nog wel eens aangeeft een open raam te hebben gevonden, terwijl alle ramen gesloten zijn. Het zou enorm helpend zijn als de app ook aangeeft in welke ruimte de app het open raam heeft gevonden. (En eventueel wat er gevonden, temperatuur daling / tocht / etc.) Hiermee…
-
Halve graden
Wij zouden het wel prettig vinden om op de muurconsole ook halve graden te kunnen instellen, niet iedereen heeft de app waarmee het wel kan. Laat je horen ;-)
-
Temporary User
It would be nice to be able to add a user for a limited time. With guests staying, they can conrol tado, but only until a certain date/time and be able to activate geofencing.
-
Child lock for Airco controllers
Add a feature to the smart ac controllers just like child lock on the thermostats. Our help in the household sometimes trigger the smart ac controller when we aren’t home and this enables the airco controllers. Currently I configured the tado app to revert any manual input after 1 minute, but with a feature similar to…
-
Geo Fencing Position Override
The geo fence is based on a location and a radius. The location is determined by the address given to the home but cannot be overridden. It is problematic when a building or a unit is far from the street (courtyards, especially in Berlin), or for houses built far from the road and requires to increase the radius. It should…
-
Display must be on all the time
I would like to request tado to add continuous display feature which shows temperature or another animated messages ..which makes it very cool ..hope everyone wants it too
-
Emoji's in Room Names
It would be great to be able to "color" code the rooms with emoji's for an even nicer overview in the app homescreen. Currently some emoji's work fine (e.g. "✨ Bedroom"), while others result in an error (e.g. "🪴 Living Room"). The error after submitting a name with a "faulty" emoji:
-
Homepage tile ideas (outside temp & wood burner temp)
Hi, just something that would be good to see would be ability to add a tile that displays outside home temp (via weather info source) and wood burner temp (of course would require additional hardware)
-
Control non smart TVR radiators independently
The system must have the capability to turn my heating system on but shut the smart TVR’s. That way I could heat my towel radiator without needing to heat another room unnecessarily. Surely the wireless receiver could call to heat whilst the smart TVR are closed thus heating all non smart TVR equipped rads.
-
Boiler modulation + zone valve control
I would like the option to use my extension kit to control the boiler via opentherm, but still have my wired thermostats click over when that sensor calls for demand so that I can use it for my zone valves. Really don’t understand why this isn’t an option, many home in the UK have zone valves meaning boiler modulation…
-
13 amp controller
Make the wireless thermostat capable of switching 13amps for heaters etc.
-
Lodgers tado app
I need my lodger to tell tado when he is away or at home But I feel for security he should not be able to adjust the control on the heating etc