-
Limit user access / privileges
We have family members who visit our house when we're away sometimes. We've added them (their phones) as Tado users so that the geofencing detects when they're here. Some of them have a temptation to change the settings which I don't then notice for a while. Is there a way to limit other users' ability to change the…
-
Add new "fingertap on top"-functionality for X devices
It is possible to hold your finger on an X device in order to start configuring it, i.e. place your finger on the display, wait until the circle is completed, (re)configure as desired. Firstly, I would like the duration to be massively increased, e.g. 30 seconds, in order to make it more child safe, i.e. retain the…
-
Configurable "How many degrees to change"-setting for X devices
Especially for X, it is a pain for non-technical users to use the device manually, especially to turn it on and off. This has changed since V3, as X seems to require much more movement on the device I would therefore like to be able to configure a "How many degrees to change"-delta value for my household. It should be…
-
Protect thermostatic valves from stucking closed during summer (off heating season)
Most thermostatic valves get stuck if they are left in a CLOSED position for an extended period of time. In order to prevent this we could either 1) leave all valves OPEN when heating is off - if the heater does not work, it makes no difference which position the valves are, and in OPEN position they do not stuck. Or 2)…
-
Samsung Smartthings
Hey How do i get Tado radiator to work with Samsung Smartthings - I tried both smartthings app(classic) but no luck :(
-
Mac M1 and the Tado App
Is it possible to allow the app to run on the M1 and M2 series Mac computers ? Not everyone in our home has a smartphone, so it would be nice they can use their laptop to control Tado. I asked this question a year ago but no one seems to care. It requires no extra programming, just a setting to make the app visible on the…
-
Grouping rooms for boost/off
I have our house divided into rooms with timings setup that work majority of the time. But, it would be good to boost multiple rooms at once but not all rooms (eg downstairs). Would be great if you could have boost/off zones that consist of multiple rooms, without it being all rooms.
-
Manual adjust graph axis
I would like to be able to adjust the axis of the temperature graphs in the Tado app. Currently this goes automatically hence graph axes jump every day and is different for each room. That makes it difficult to compare different days or rooms and makes it difficult to observe how quickly a room heats up or cools down. I…
-
Dynamically adjust opening percentage based on rest of system as well as heat demand
A couple of weeks ago I posted a suggestion that users be allowed to set the minimum opening percentage on the smart valves to alleviate water rushing noise. In a separate thread about vibration, a solution was suggested to remove the Tado valve from the radiator nearest the boiler because "…it can happen that the water…
-
Enable eBUS support for Tado X Wireless receiver
The V3+ supports both eBUS and Opentherm however the newer product series X does not support eBUS. Please enable also eBUS support for the X series. I imagine since you have the code for V3+ in the firmware it could be refactored over for the X and with a firmware update it could work.
-
Icons for each room type
Can you give the ability to select a range of icons that can be applied for each room that we have. The Hot Water icon is a great example of a visual icon that is easy to see very quickly. We have 14 buttons for heating rooms in our house and it would be very helpful if there were icons for different rooms. For example,…
-
Enable tado on wifi without internet
Today I had 6 hours without heating in the winter. My internet was not working for 6 hours. Tado expects the bridge to be connected to internet for smart scheduler to work and connect with wireless thermostats. Why not enable bridge using wifi home without internet? A heating system should never rely on internet. Relying…
-
Making smart schedule more smart
Would be nice have one page in which they are group the history for heating activity of all rooms together, to have more clear when the boiler can be left off reducing one or more temperatures at a certain time. (Sorry for my English)
-
Ability to rename device
When batteries are running low I get an email informing me that a particular device in a specific room has an issue. In some rooms I have 4 radiators. I then have to go round ‘blinking’ the stat multiple and watching all the stats in the room to find which one it is. it would be great to be able to rename or give a…
-
Guest car support
For guests using the home charger, offer the capability to control the charger timings by: - manually setting start and finish state of charge - departure time - make/model of car
-
Worcester Bosch 4000 ems control
Please enable support of EMS / Ebus functionality so Tado can control modulation of this boiler