-
Geofencing lors d'une consigne de température via l'application
Bonjour à tous, Je rencontre un souci avec le geofencing lors de l'auto-assist qui est aussi valable pour le mode absent. Lorsque j'indique une consigne de température supérieure via l'application a celle prévue dans la programmation intelligente ( que ce soit en durée, ou jusqu'à la réactivation de la programmation ou…
-
Temperature monitor of hot water cylinder
The hot water control does not really control the water in my cylinder, it is just an on/off switch. It will be excellent if Tado could come up with a compatible thermometer that would monitor the water temperature in the app. Even after spending close to £1,000 I am sometimes getting cold showers as due to some…
-
Monitoring of Connectivity
Useful if the app could monitor connectivity of the Tado Internet Bridge to both he internet and Tado Cloud and notify the user if there is an issue
-
som om versus 24 hour
why not chance the app, so people have the choice to set time schedule between am pm and 24 hours schedule, IT would make i easyer for som people.
-
Daily schedules
Ability to have a different schedule every day if you want. And the ability to save the schedule to be repeated by month/season so it is easy to change betwee different schedules throughout the year very easily.
-
Increase Zone Controller Room Limit
Backstory: I have reached my limit for number of rooms connected to a single zone controller which currently stands at 10. Trouble is of course the typical UK household only has one thermostat, so when you switch to tado it's only possible to wire in one main controller. For a medium size house (or bigger) there is enough…
-
Airco and heating syncronisation
It would be great if Tado airco and standard Tado heating controls could synchronise in the same room so that heating doesn’t try to heat when airco is cooling. This seems like an obvious feature, but apparently they are two totally different systems in the app. This is a shame as in many cases in Europe the heating is…
-
Add Time Block
Currently this is quite crude. The app adds a time block from 10:00 to 12 :00. But usually the user needs to insert a split a current time block which could be anytime if the day. I suggest to move the "Add Time Block" into the Edit Time Block. This is where the Delete Time Block currently lives so this is neater. More…
-
Fix HomeKit support (round up of feature requests)
Hey tado, everyone seems to know better than you what your HomeKit support needs. Here I gather all the requests I have seen around: Allow temp/humidity sensors to be exposed independently. We bought these pricey TRVs. Why don't you let us use all their features? Expose battery levels in HomeKit. It is really stupid that…
-
Improvement to the Humidity Messages in the Air Comfort Section
Over the last few months I've noticed a lot of messages in the Air Comfort Section making suggestions about how I can improve the humidity levels in the majority of rooms. Unfortunately the messages have been misleading due to the high natural levels of humidity in the air. I suggest that the algorithms could use humidity…
-
Open window detection only when heating and without Auto-Assist
First: The automatic suspension is a really efficient tool, but I absolutely don't see any reason why we should pay for it? As I don't have auto-assist I receive a push notification whenever an open window is detected. The effort for tado of disabling the heating in the room for 15 minutes is lower than the effort of…
-
Air comfort notification
Can the app please push a notification if one of the rooms is going from high to low air comfort with a recommendation of what to do -> Open window, set higher temperature. Can the air comfort be shown in the main tiles (for instance small point) of the app?
-
Make it easier to see which room is requesting heat by adding a symbol/colour to room Icon
I have a few rooms with smart TRVs and it always takes me a while to find which room is requesting heat. It would be easier if there is a little logo, or maybe a coloured border around the room icon if it is being heated.
-
Air Source Heat Pump
Hi, I currently have a tado controlling my hot water and central heating. I would like to update my central heating to use a ashp, are tado controllers compatible with this type heating system
-
Maximum Temperature Limit
Hi there, with the increasing cost of fuel , I was thinking that a maximum temperature limit may be of some use that could be set by the account holder in order to prevent "temperature tampering" by anyone not authorised. This could possibly be built into the app, and hopefully could save money. Any thoughts !
-
Child lock vs. manual temperature adjustment when offline
Thank you very much for implementing a child lock feature to the radiator thermostats. It is essential as my son is now in the age where he tries out everything digital and he would totally mess up our heating schedule :-) BUT: When child lock is turned on the ability to manually adjust the radiator thermostat in case the…
-
When an open window is detected add the name of the room to the notification
Could the name of the room be added to the notification text when an open window is detected?
-
Req. App intigration Homey
Hi Do you plan to make a integration with homey bridge? thanks for a great product \Søren
-
Swipe from left to close room thermostat pop-up for Tado app on iPhone
When clicking on any of the rooms to change the temperature, I have to somewhat awkwardly (or use my other hand) press the little cross in the top left corner. It would be a lot easier if I could either swipe from the left to go back, or swipe down to close (as it comes in from the bottom). Other than that I think the app…
-
Low/High humidity notifications
Would be great for Tado app to send a notification when a room has low or high Humidity, with the ability to set the level that the notification can be triggered.
-
Verhoog de maximale instelbare ruimtetemperatuur
Graag de maximale instelbare ruimtetemperatuur verhogen.. dan wordt het installeren in de zomer eenvoudiger.. anders moet je de thermostaten in de koelkast leggen om het systeem te testen.. Als je deze maximaal 35 graden kan zetten dan heb je geen probleem met instellen..
-
Batterijen Tado leeg.. deze batterijen zijn de beste vervangers..
Als de batterijen leeg zijn, vervang ze dan door oplaadbare batterijen 1,5 volt lithium.. Wel zo duurzaam en gaan een leven lang mee... stop de verspilling.. https://amzn.to/396MPaC
-
Humidity correction
Discovered a function to set the room temperature correction and would like to have a function to set the a correction for the humidity
-
Multiple households
Pretty sure this idea already been suggested in the past, but I still want to re-suggest the idea. A function to manage several households with one account would be really useful for many users.
-
origin of an order
Virtual assistants are increasingly present in homes. And Tado, interact with them very easily. It would be a very valuable information if, in the activity graph, in addition to other information (temperature, humidity, climate ...) the origin of a machine start-up order could be reflected. And so, to know if it has been…
-
Summer mode
My son has a Netatmo system and during the summer, the connected valves calibrate every 2 weeks, even when the thermostat is off, so that the thermostatic heads do not get calcified or stuck (which may happen if the valve is fully closed for a couple months). With Tado, I need to take all my programming to put the valves…
-
New hardware product: controller for electric underfloor heating
Please consider adding a new item of hardware to your set of products; a controller for underfloor heating. Such a unit should: Be able to switch at least 16A. Have an integrated air temperature sensor. Have connections for an underfloor temperature probe. Support operation in 3 modes; air temp only, floor temp only and…
-
SUMMER MAINTENANCE CYCLE
Tado needs the following. A way of cycling all the valves at least once a week during summer, and running the central heating for a couple of minutes to prevent valves seizing, to prevent pumps calcifying in hard water areas, and to prevent dead spots where sludge settles and to cycle inhibitor. All that is needed is a 10…
-
Gentle heating curve
Find it more pleasant when tado° heats my room slowly (as it does if the set-point is just 1° above the current temp on a smart TRV). Would be great to have a way to choose to have it heat up gently in this way (i.e. presumably with a lower flow rate) all the time.
-
Away Mode (Pet friendly)
The away mode is great, but I a have a cat and maybe it could be great to have an away mode “pet friendly”. Making sure that the house is neither extremly cold or hot so my pet is confy in it.