-
viessman eco mode for DHW
I own an viessmann vitodens B1KF on opentherm protocol apired with tado v3, since i changed to opentherm my eco mod(preheat) option disappeared from both boiler screen and vicare app. its not on viessmann side i ve talked to viessmann and they said this: "Have you spoke to Tado about the DHW temp setting ? The ECO stays On…
-
Powered Smart TRVs
Could you introduce AC-powered smart TRVs with a rechargeable battery backup please? Haven't had enough use of the units on battery so far, but want to get away from constantly changing batteries in the household. Take this a step further and have them communicate across the home power cabling to the Internet bridge.
-
Electric towel rail controller
I keep hearing that in the UK, a huge amount of energy is wasted through the inefficient use of electric towel rails. Namely, they are dumb with on/off switches and are not managed alongside the heat output of the main central heating system. Therefore they are left on for long periods. Tado, how about producing an…
-
Relais vloerverwarming bij 1 golfje ook volledig open
Blijkens antwoord van Tado is een als relais ingestelde slimme bedrade thermostaat op een Honeywell Zoneklep maar 33pc van de tijd open bij een warmtevraag van een golfje. Dat betekent dat als je temperatuursensor in de kamer met vloerverwarming een warmte vraag naar de ketel stuurt, de zoneklep niet geopend wordt; voor…
-
Set A/C mode across schedular
I have an a/c unit that I use to cool the house in the summer and heat in the winter. Using the tado a/c controller, if I set the a/c mode to auto it creates a problem. When a scheduled time block has a lower temperature than the one before it, the a/c will actively start to cool. In the winter this is not a desired…
-
Home Assistant boiler data/control
It would be nice if the data/control to en from the boiler would be integrated in home assistant. This would give a better image of how much gas we are actually using. These info would make nice graphs. Knowledge is power!
-
fonction iFeel Clim Gree
Bonjour, a quand la fonction iFeel intégrée au tado pour une meilleure efficacité et gestion de nos climes.
-
Hot water tank smart thermostat
I think there is a market to provide a variation on the Smart Thermostat in the form of a unit with a temperature sensor on a cable, to allow the user to install in a thermal water store. This can give the flexibility for hybrid systems that have multiple heat sources for the store such as Solar thermal, biomass and oil or…
-
Connect to enery supplier as a service
It would make it a lot easier and simpler to have a service that connects to the energy suppliers. This would make the the usage and money part of the application a lot more accurate to manage. I have already seen this service offered by some online applications.
-
Central Heating On/Off missing feature on Tado app
There is a feature to turn Hot Water on or off in the app but no feature to turn Central Heating on or off. For anyone with a dual heating system for central heating, e.g. an oil fired boiler connected to a Tado receiver plus an alternative heating source, such as a solid fuel boiler, it is essential to turn off the oil…
-
Battery Changing
Hi Development Any thoughts on logging the battery changes. I suppose I could use a spreadsheet but seems a little OTT. The reason I’m asking is that a room which had new batteries (good ones) just three months ago and which is hardly used (temperature is set to 18 degrees). Is asking for new batteries again. Having said…
-
Permettre à la sonde de température de demander du chauffage à la chaudière directement
Apparemment pour le moment là sonde de température ne sert qu'à mesurer la température et ne peut que communiquer avec les vannes thermostatiques connectées des radiateurs. Ce serait intéressant que la sonde puisse directement communiquer avec la chaudière. Par exemple pour une chambre qui a besoin de rester à 16° :…
-
Dashboard
I would love to see a 'dashboard' type feature where I can see who and when users manually adjusted the trv's or when schedules started or ended or when home and away are started.
-
Away by individual family member
I would like to be able to set different away settings for each room by family member. I have 3 scenarios: 1. Both my wife and I are home: Both our office rooms we are using for homeoffice should heat. 2. I am home, my wife is not: Only my office room should heat. 3. I am out of home but my wife is home: her office room…
-
Temporary heating schedule option
On the tabs for heating such as the days the ability to create a temporary schedule for the day and if I need to do it again I could select the option as it would be perfect for days when I need to give my baby a bath.
-
Extra functions V3+
It would be particularly nice to be able to have a few "free" functions in the app that you can program yourself. I have a function on my Mitsubishi heat pump that is not supported now. And if you can program a mobile phone to be a remote control, then surely it is also possible for Tado??
-
Ability to weight the heating across multiple radiators in a single room
I would like to be able to disable one of the radiators in my living room when, for example, we have a Christmas Tree in front of it and rely on the remaining radiator to heat the room.
-
display changes made via app or siri on tado smart ac control unit
display changes made via app or siri on tado smart ac control unit
-
mode control via tado smart ac control unit
pls allow to control cool/dry mode
-
fan control via tado smart ac control unit
pls enable fan control on tado smart ac control unit (speed and louver/swing if possible but at least speed)
-
Energy IQ Improvement - independent TRV
Hello, A bit of context first. I moved into a new house and went all in with Tado products to make heating easier to manage this winter. My setup is as follows: Ground Floor has underfloor water heating and 2 Tado wired thermostats (Kitchen and Living Room) Upstairs has 4 Tado TRV (Bedrooms and Bath) + 1 additional…
-
Slim schema koppelen tussen ruimtes
Zou het niet handig zijn als je het slimme schema van de ene ruimte kan koppelen aan de andere ruimte. Meestal zijn er verschillende ruimtes in een huis die op dezelfde tijdstippen verwarmd moeten worden. Is ook handig als er meer dan 7 radiatoren in één ruimte zijn. Dan kun je de ruimte virtueel splitsen op deze manier,…
-
Show the wireless receivers ON/OFF graph
A single TRV can call for heat all night. And the only way to check that is to go into every single TRVs graph. Which can be many!
-
Show an overall ON/OFF graph
Show and overall ON/OFF graph that shows all thermostats. So that you can see what has been calling for heat. It will help with optimizing the schedule.
-
One-off schedule
Hi, Would like to be able to overwrite the programmed schedule, but in anticipation. Ie if I know that tomorrow morning I will have to wake up 1hr earlier than usual, I'd like to preschedule my heating to go on 1hr earlier, but not have to adjust my regular schedule as it's for 1 time only. Right now, I'm only able to…
-
Hot Water button irrelevant
Hi, I'm using a separate boiler for my hot water (heat pump), not connected to the burner I'm using for my heating. As such, the hot water function is irrelevant and I would like to make the button disappear from my home screen. I also had to create a schedule for the hot water to be "always off". It would be much simpler…
-
Multiple Internet gateways
My Internet gateway failed to get a reliable signal to a radiator valve through a single wall. Can we have either multiple gateways or use the normal house WiFi instead in order to fill in dead spots?
-
Disable Away mode when thermostat is scheduled to Off
When thermostat is scheduled to Off and I leave home, it switch to Away mode and start heating when temperature is lower than set in Away mode. This is the wrong logic for how this function works. When the schedule is set to off, the thermostat should not turn on when I am not at home.
-
Connect Energy flip and Tado.
By connect Energy flip and Tado, tarifs and gas/electricity consumption can be synchronised. This will improve both apps.
-
POE option in Bridge
As the range of the bridge is a bit limited, a Power over Ethernet option in the brigde would be very handy. Then you are more flexible to bring power and ethernet to the bridge at a central place in the house.