-
Add current Boiler Flow rate to graphs if using Digital Link
As Tado˚ knows the flow rate temperature of boiler at any given time, can this information be added to the graphs, as you hold your finger on the graph, see example below This would help us to determine if we can adjust the MAX Flow rate to be more efficient or if the Flow Rate is not high enough and the boiler is…
-
Hot Water Catch Up
Hi One issue is that when the geofencing controls the hot water, and you are out for the day and your scheduled timings are not done, you come home to no hot water :( It would be great if there can be a setting for a 'Hot Water Catch Up' that would identify if a hot water schedule has been missed, and Geofencing identifies…
-
Heat release valves
If there would be an option on valves to setup not to close the circuit when reaching the heating point, just send the end signal to the themrostat, then there should be circuits where the remaining heat should release and this extra heat could be useful in bathrooms or other higher heet needed rooms.
-
Support for multiple tado installations linked to 1 account
Please can we have proper support to enable management and control of multiple tado installations via the one account/email I stay at several locations and manage others as a landlord. When email notifications arrive they do not indicated which home they are for. Logging in/out of multiple accounts is awkward when you want…
-
iOS 16.3 HomePod Temperature Sensor
With iOS 16.3 HomePods can now relay temperature and humidity data to HomeKit. I’ve had trouble with the room heat being cold on one side, and the tado valve is near radiator… I’m using the HomePod for offsetting the room temperature, could this be automatic ?
-
App should be able to shutoff manual settings of starterkit
For the use of Tado (starterkit) in rooms which cannot be accessed by you in person, such as; guestrooms, B&B, kids bedroom, other privacy sensitive situations, etc., it would be welcomed if the app can shut off the ability to change the roomtemperature manuallly. EG. We have a B&B and we have programmed the temperature…
-
Improve the temperature differential by applying a feedback loop
Every house is different. Boilers and plumbing is different. This leads to the temperature rising gradient being specific to each installation. So far so good? Now we often find a situation where a tado rad stat or room stat is set for, say, 18 degrees cent, but one later finds that the actual temperature is higher. It…
-
Target temperature in graphs
Hi Really like the graphs of the heating profile throughout the day for each ‘zone’. However it would be great to see the target temperature (in a red line) on those profiles.
-
Color of tiles
The color of the tiles is now fixed at blue/green till 18 deg and orange/red from 19 degrees. We never set the temperature above 18,5 and therefore the colors are always blue/green. It would be nice to be able to set other limits. Having different limit for bedroom and living room would also be nice.
-
Hide Tiles
On the homescreen there are tiles that I never use and would like to hide. It would be nice to be able to hide the following tiles: auto-assist, air comfort, energy IQ, Care & Protect.
-
Hybrid Heat Pump support [Atlantic Aurea 5 R32]
This heatpump comes with the plugwise Anna thermostat using the opentherm protocol to control most combi-boilers, so they control the heatpump and the combi-boiler, but one must remove the Tado thermostat. If plugwise can control the hybrid system, it should be trivial for tado to do the same thing. I would like to remove…
-
Tado to start replying back
My idea is for Tado to start replying back to the community. I am seeing posts from YEARS ago ignored. It's time for this idea to be the top one in the company and Tado to listen to it's loyal customer base.
-
Warn about two day instruction wait time with compatibility check
I've just had to change my boiler, and I followed all the Tado advice about asking for a compatibility check. I thought all was good. The boiler installer engineer was here getting towards completion. I went to the Tado app to change the boiler. Found the boiler… and it said something like "Please wait for up to 2 days for…
-
Valve moving when out of heating season
It's usual that the long pressed valve needles are stuck. If the valves move them on a setupable time period (daily, weekly, etc) this should be avoidable.
-
Better collaboration with Air Source heating system
I have an air source heating system in my home and the projected forecast costs are not reflected well at all with the app. I input my energy usage each month and never get anywhere close accurate costing suggestions. The data input screens are clearly for gas/oil systems, and not designed for Air Source systems. Our Tado°…
-
Manually switching off individual rooms
Sometimes it is easy to switch off one room, for example the one that is still cold in the morning but is heated by the sun while nobody is there. The only way to do this is to turn the temperature down, or first switch off all the rooms and then switch some of them back on.