-
Switching on/off based on humidity
Hello, It would be grate if we could have a function in the app where one can choose to switch on or off based on humidity. For example: if humidity reaches 60% switch on to 23C till humidity is lower then 60% or another value
-
Meerdere woningen bedienen vanuit 1 tado account
Hi, Ik loop er tegenaan dat ik meerdere woningen wil bedienen. Echter is dit nu niet mogelijk vanuit dezelfde account en moet ik een tweede account aanmaken voor de tweede woning. Daarnaast moet ik bij het wisselen van woning steeds uit- en inloggen. Ik heb het idee dat meer mensen met dit probleem kampen. IT-technisch…
-
Support boilers with no ability for different levels of heating better
My boiler, like many others, does not support different levels of heating - just on or off. I find it really annoying that my app says 1 flame or “heating to 20.8c” and colours the graph area in when it isn’t actually heating my house. Additionally this makes the stats on how long the heating has been running during the…
-
Smart Assistant - notifying of temperature not raising as expected
It's more a feature improvement than an actual problem: I've started heating season last week and left the home for few days. The smart valves have been open all the time but temperature was not growing due to malfunction of the heating circulation pump. I've fixed it (it got blocked after summer season not being used) -…
-
RESTORE DECIMAL PRECISIO
RESTORE DECIMAL PRECISION. IT'S A CORE FEATURE! IT WAS A STUPID IDEA TO BREAK A CORE FUNCTIONALITY TO SOLVE A UI PROBLEM WITH THE CURSOR
-
Room specific 1h boost button
Boost button in the room tiles in the overview screen. Useful when you prepare the kids for bath or bed. I have 7 rooms/zones spread over 2 floors and I don't want to boost all the rooms.
-
Airco and heating syncronisation
It would be great if Tado airco and standard Tado heating controls could synchronise in the same room so that heating doesn’t try to heat when airco is cooling. This seems like an obvious feature, but apparently they are two totally different systems in the app. This is a shame as in many cases in Europe the heating is…
-
Open window detection only when heating and without Auto-Assist
First: The automatic suspension is a really efficient tool, but I absolutely don't see any reason why we should pay for it? As I don't have auto-assist I receive a push notification whenever an open window is detected. The effort for tado of disabling the heating in the room for 15 minutes is lower than the effort of…
-
Humidity correction
Discovered a function to set the room temperature correction and would like to have a function to set the a correction for the humidity
-
Adjust temperature or Boost Heating feature
Boost Heating is useful but the default 25C value is, in my opinion, too high. I would like to be able to change this, eg. To 22C.
-
Bypass feature
Hi all, I am a happy tado user since a few months and realized that we needed to install a by-pass in our cv system. Now I am wondering why tado does not offer the feature to mark one of your smart thermostats as the by-pass radiator. So this thermostat will never close fully, so that the pump of the CV (boiler) is…
-
Stop account leakage from the community
Currently it is possible to retrieve intelligence on the existence of community accounts by entering e-mail-addresses at login. This is especially bad, because many might be using the same e-mail for their personal tado account. This is highly advised against by several security guidelines, including NIST and ISO.
-
Smart AC & Smart Thermostat/Radiator integration
Hey, I am using Thermostat and Smart Radiator since my house has central heating, but for cooling reasons I need to install two AC's LG Split, more to cool than heating because I already have a central heating system. I am thinking of adding Smart AC Control to my Tado System so that I can integrate everyone on the same…
-
Customize the main screen
Add more options for a customized look. display humidity
-
dynamic offset to cure TRV inaccuracy
It's well known that TRVs are accurate for room temperature when the radiator is off, but inaccurate when the radiator is on. I'd like Tado to implement a feature where the user can set a dynamic offset, such that when the radiator is on the room temperature is offset by -9/+9 degrees. Should minimise the TRV temp problem.…
-
More rooms for extension kits
Tried to add a room to extension kit but limit is 10 rooms I cannot have more than 1 extension kit so I am restricted to a maximum 10 rooms can the limit on amount of rooms be increased for extension kit?
-
See which room is calling for heat on home page
You can see which room is calling for heat by going in to the room and seeing the wavey lines, but on the main home page, there is no clear indicator as for which room is calling for heat - just a colour indicator for 19 degrees and above (yellow) 18.9 and below (green). This can actually confuse things as yellow could…
-
Make Quick Actions more specific
I like the idea of the Quick Actions although the boost action would be much better and more useful if it were to be applied only to the rooms that are actively heating in the schedule at the time the boost is applied. I don’t want to be boosting the whole house when I’m only using the lounge or downstairs. Can this be…
-
Manual control - Turn-all-on/off (boost) timer - Away Mode timer/datePicker
I quite liked your Turn-all-on/off feature, but I am missing a specified time - the same way as if you manually set a temperature to a room, so for example 2h, 5m... Also the same way with the manual AwayMode - there it would be usefull a calender/dateTime picker. Thanks! Jaroslav
-
Notification when heat is turned back on automaticly
Hi. There is the feature where you'll get a notification if there's an open window and then you can click the "turn of heat", the heat stays of for a period of time and then on. My request is a feature that makes it possible to get a notification when the heat then turns on again - so that I know to close windows/the heat…
-
Support for multiple people and multiple zones
With current geofencing, if all devices are away from home all zones are set to away. If at least one device is at home, all zones are set to home. Ideally, this should be more granular. As an example: We have two devices, mine and my partners. We have four zones: my study, my partner's study, a shared bedroom and a shared…
-
Need a meter for hours heating was on
Living in a block of 8 flats, we all tap on central petrol heating. We get charged by the hours we have heating on. No information In the daily room graph (have only one thermostat) there is no indication of the time heating was actually on, from start of month / from start of day till present. Is something so obviously…
-
Oventrop 1011450 - Bulk Purchase
I am sure you are aware that the above elbow adapter is proving a success for the few using them. How about you arranging a bulk purchase from the German Firm in order that we may buy from you? For anyone who has not read the thread on this, the above link for Amazon shows the adapter which turns an upright tado TRV into…
-
Changing the maximum flow temperature myself
Initial problem: Hello, i have a Ferroli Bluehelix PRO 32C heating central. I use tado for 3 years now. After last update of Tado APP to version 6.0.2 (9826) i found following bug. I limit maximum temperature of heating using heating buttons on my boiler to 55C. After this update, maximum flow temperature is reseting…
-
VA03 Smart Radiator Thermostats support a charging port?
Will the next version of smart radiator thermostats include charging ports? Will make life a lot easier. I'm stuck with VA01's. Unless there is an introductory offer that I can't refuse I doubt if I'll change them. If I did I'd die happier if they had charging ports 😕⚰️😌
-
Include a full calendar plan
I miss a feature to plan with my Tado radiator knops on a calendar day basis. For example planning a period of holidays (heating off/away), indicating days I work from home (heating in my working room on during working hours) The current weekly schedule by room is a good start but very limited when things do not follow a…
-
Suggestions left unanswered.
Hi, Many of us have been asking for it for a long time. I am the new user of TADO V3+ and I am actually satisfied with it. However, after reading many suggestions of other users, Tado does not take it seriously. A lot of comments on the appearance and functionality of the main screen. Windows 8 appearance is ok but why is…
-
Ability to schedule "one time" events
Currently you can define a schedule but sometimes I have the need to just schedule a one off session. For example, Friday I will be home earlier than usual so I want to have the temperature be 20 degrees at 13:00 with the end-time being the "next" change. Its nice if this is possible because Tado will then pre-heat…
-
Energy IQ - Better process for when energy meter is replaced
I recently had to have our smart gas meter replaced, because the existing one became faulty. This meant that my meter reading dropped back to zero when the meter was replaced. When I came to enter a meter reading in Energy IQ, it said I could not enter a number lower than the previous reading. I contacted support, they…
-
Select how long boost hot water for Tado X
I've switched from the V3+ to Tado X due to connection issues with the bridge. With V3+ in the app I could select how long to boost my hot water for with the pencil, this was a vital feature for me. With tado X I can click boost but it is only set for 60 minutes and can't be edited. I see from tado's website this is a…