-
Option turn off LED
an option for the led display to be turned off, perhaps only when actually used, for example. The display lights up a dark bedroom and can be disturbing.
-
Text size.
Great app but the temp display is unnecessarily small.
-
Control even and odd weeks respectively
I'm wondering, could it be possible to control schedules for odd and even weeks in the application? Biweekly (even weeks) my two children stays at my place, and biweekly (odd weeks) they stay with their mother. Quite normal nowadays which is why I think it makes good sense to have the option to lower the temperature in the…
-
Leave valve open when batteries low
When the batteries go flat, I have found that the heating keeps trying to heat that room, but with the valve closed it won't, so the system either needs to turn that room off or personally I'd rather it leave the valve open so it can heat the room, with the rest of the house.
-
Window (No.) open detected
Hi. Hope all is well. Window open dedicated does not tell me which window is open and sometime I am notified even though all my windows are closed. This tells me that draught is somewhat coming in but I don’t know from which window. It would be really helpful to be able to identify which window is open, this is so that one…
-
Aanpassen aanvoertemperatuur CV
Graag een functie toevoegen om zelf de aanvoertemperatuur voor de CV in te kunnen stellen. Nu moet dat heel omslachtig en tijdrovend via de helpdesk. Ik denk dat iedereen er bij gebaat is, wanneer de klant dit zelf kan aanpassen.
-
one time heating for short time
Hi, I have idea if is it possible to add in your app one time heating time. For example if I have heating plan in smart schedule, but something change in one day and I know it need heating 3 hours early, but I don't want to change the plan.
-
Humidity indicator
Could have added humidity level in HomeKit nearby temperature like little ⭕️
-
Indicate the operating mode of temperature sensors on the home screen.
On the app, the main screen with tiles for each room, add a symbol to the tile indicating if the sensor is in Controller / Independent mode and/or has been locally set.
-
schedules that can be assigned to week numbers (for co-parenting)
When faced with co parenting, kids are typically away for a week and the next week they're back. During the off weeks, no heating in their rooms and their bathroom is required and that cost can be saved. In vacation time this scheduling can change, for example two weeks of and then back. So having the ability to make two…
-
Apple M1 app
Can the Tado app be made available in de M1 appstore please. It requires no additional programming, just allow it. We use apps like the ones from Millheat, Eufy Ikea,... on our iMac M1. This way everyone can use it (not everyone has a smartphone and the ones who have one aren't always at home)
-
Badly designed system
I'm kind of annoyed that I even need to post this here so apologies for the tone but I've repeatedly asked by customer support to do it even though I think what I describe below as a bug or at the very least, a highly flawed design. I do not think such issues should be dealt with via an 'ideas and suggestions' category in…
-
Auto return to room schedule when temp has been manually set
The schedules are real flexible but sometimes you need to boost the temp. This you can do easily via the app or stat. What would be usefully would be able to select return to to normal automatic schedule on the next timed change to the room temp. We have had a number of occasions where someone felt cold tweaked the stat or…
-
Use standby heat setting +8/10C in my heat-pump thru tado?
Hi, I can't use standby heat setting +8/10C in my heat-pump thru tado. That is essential when I lower temperature when I am not in my cottage. Cottage could be empty for several weeks. I is no point to keep temperature over +10C. Standby heat setting 8/10C+ is separate button in Panasonic heat-pump remote. Is it possible…
-
Colour change
Please can you change the colour of the button for care & protect from red to any other colour.. There is nothing more wallet clenching when looking on the app to see what is off & see the red of the care & protect button & start thinking.. Dam who turned the hot water on ;-) Thanks
-
Manual thermostat adjustment temperature limit
We run a B&B and every room is equipped with a smart thermostat so the guests can control the temperature in their room (normally the Smart Schedule controls the temperature). To my surprise numerous guests turn the temperature to the maximum of 25°C (I guess they just turn the control knob all the way without thinking)…
-
Home Screen - Flag/highlight rooms currently on manual override
It would very useful to see on the Home Screen which rooms, if any, have been set manually using the app or, more likely, a radiator control (I.e. and, therefore, are not following the schedule). On too many occasions, I’ve discovered a family member or visitor has adjusted a radiator control, which has defaulted to ‘until…
-
Show thermostates %opening graph
Hi, i woukd really like that my thermostates % opening are showed on the graph, now we can only see how much the the valve/thermostat was open with holding down on the graph and see on the 3 heating symbols, or on the 3 gray scaled colors, thats pretty much useless,,, the system have 0-100% so why not show it on the…
-
More than one tado
I have a holiday home where I have installed tado and I am very pleased with the system. The remote control by phone is excellent. I would like to install tado at my main house but I can’t because you can only have one application on a phone. I think it would be great to be able to have more than one application on a…
-
Temperature monitor of hot water cylinder
The hot water control does not really control the water in my cylinder, it is just an on/off switch. It will be excellent if Tado could come up with a compatible thermometer that would monitor the water temperature in the app. Even after spending close to £1,000 I am sometimes getting cold showers as due to some…
-
Air comfort notification
Can the app please push a notification if one of the rooms is going from high to low air comfort with a recommendation of what to do -> Open window, set higher temperature. Can the air comfort be shown in the main tiles (for instance small point) of the app?
-
Req. App intigration Homey
Hi Do you plan to make a integration with homey bridge? thanks for a great product \Søren
-
Gentle heating curve
Find it more pleasant when tado° heats my room slowly (as it does if the set-point is just 1° above the current temp on a smart TRV). Would be great to have a way to choose to have it heat up gently in this way (i.e. presumably with a lower flow rate) all the time.
-
Future request: please add AUTO mode to Tado smart AC
Hi, I would love to have also AUTO mode beside COOLING, DRY, HEATING and FAN in the tado app and also if possible in HomeKit too maybe we are more people willing that it will happen
-
TRVs for bathrooms
I know you have https://support.tado.com/en/articles/3403596-can-i-use-tado-in-my-bathroom but it would be nice to have some for smaller bathrooms (i.e. where the towel rail is <1m from the shower.
-
Increased Aircon Functionality
1) My Aircon has boost and eco on the remote. Could these be added to Tado app please? 2) Auto on my remote alows +/-6c around 24c. The Tado app does not allow temp setting in this way in Auto mode.
-
Smart AC Controller should be able to use a separate Temperature Sensor
I've been a happy user of Tado for two or three years. So when we added an A/C unit to our attic, I naturally purchased a Tado Smart AC Controller, assuming it would integrate with the existing radiators and Remote Temperature Sensors in the same room. I was quite surprised to discover this isn't possible. I might be able…
-
Motion sensor to detect if there is activity in the room and activate heating
Could you introduce a motion sensor that understands if there is someone in the room so that it starts heating the room only if there is activity in the room. We have some rooms that we rarely use, it could be very handy to have this functionality with sensors detecting the activity and heat the room when people are in it.
-
Smart home connections..
There are two things I would like access to from Hubitat and/or Alexa. Preferably Hubitat. 1.Home or Away settings, both to change and monitor 2.Device calling for heat from boiler.
-
Improvements to the Wireless Receiver / Programmer Cover
In the UK, many modern houses have the programmer / controller in an easily accessible place and it is not uncommon to find them on the kitchen wall about 20cm or so above a kitchen worktop. They are therefore potentially at risk of splash or dirt ingress. Many of these controllers / programmers have the cables coming in…