-
Remove the 10 room limit from the controller
Please remove or increase the 10-room limit from the controller. I have to group rooms together to make my system work which is not ideal.
-
p/kWh
For the UK Market, the tariff is in p/kWh for Gas. for example my tariff is 10.33 p/kWh But on the tado app i can only imput £/pWkh so my energyIQ is not correctly showing my usage. Is this something can be implemented?
-
Away Mode by Mobile Device
So my wife and I work from home, yet on some days (random days) either of us may go into the office. We work in 2 separate rooms at home. Because I do not know the days either of us will be in the office I need i remember to turn the programmed heating off in the room in which no one will be working that day, and…
-
Lock wireless thermostat
Can I lock my wireless thermostat ? If not when will this feature be available Thanks
-
Switch all off for 1,2,3 hours
Any chance of a function to switch off all heating for a set period and for it then to return automatically to schedule? Thinking of when, for example, we go to bed early and heating doesn’t need to be on. It’s possible to switch off, but need to wake up and remember to switch back on for the morning. Automatic resumption…
-
New gas meter in Energy IQ
In Energy IQ add the possibility to start meter readings back at zero after installation of a new gas meter. At the moment you have to delete your complete history before starting back at zero.
-
Profile related away mode
A possibility could be to relate and correlate the away to different profiles. When one Profile-A and Profile-B are at home ALL the house will be warmed. When profile-A and Profile-B are out ALL the house will NOT be warmed When profile-A is at home and profile-B NOT only commons rooms and profile-A related rooms will be…
-
Large House Capability
I have a new Tado system fitted to an old oil boiler and I am mostly loving it. The issue I have is thick walls and scalability. I have maxed out devices so had to change back to regular TRVs in some rooms and I have maxed out on zone controllers. The bridge can never see all TRVs or Wireless Temperature Sensors (WTS) at…
-
Merged: Heating Schedule based on number of people at home
This discussion has been merged.
-
Dry clothes function
I have a dehumidifier and together with the room humid graph I known when I need to turn heater on, open windows (when humid outside in lower than inside, it could be found in local forecast) . I see when cloths are drying by the humid going up, but after 85 it doesn't dry than I have options, open windows, turn on the…
-
Simply show heating on and which rooms requesting on the App
When I open the app I want to (really need to) be able to simply see: Has Tado requested my heating to be on? Which smart radiator room(s) is triggering the request We've just fitted smart radiator thermostats, and our heating is on unexpectedly. Driving me mad trying to work out why it is on (or off!!!). The heating has…
-
Moved: Update the app so it works properly with iPhone 14 pro camera….
This discussion has been moved.
-
Control hot water with wireless reciever from more then 1 thermostat
I have 2 tado thermostats, one upstairs and one down stairs but can only turn the hot water on manually from one of them via wireless reciever, only a minor issue but think it would be useful to be able to control from both!
-
Add silent mode to app and API
Many aircons have a silent mode for at night. I use his mode very often and it can only be enabled with the original remote. It would be great if the silent mode is added to the app and to the API so domotica developers can use it too.
-
Add decimal to the usage amount
The city heating is measuring in giga joules. My usage last month was 0.356 GJ and a unit costs €45.26. Currently it is not possible add meter readings because it will be too inaccurate. So please add the possibility to have 4 digits behind a decimal.
-
GeoFencing early start
SUGGESTION: Provide for GeoFencing to be programmed or set in advance. For example - I'm going out in 2 hours time. I'd like GeoFencing to start in say 1 hour. And could such programming be regular (every Tue/Fri, weekdays, etc) as well as occasional
-
Boiler Protection
As many combi boilers continue to run even after shutting off (to prevent internal overheating) Would it be possible to add a feature where you can select a room to act as a bypass valve. This would be as simple as when the command is sent to the boiler to turn off, the nominated valve opens to prevent possible damage to…
-
Recommend Zoning Setback Temperature
As recommend by Tado and Heat Geek instead of going around the app setting what I think are good temperature differences per room - can there be a recommend setback temp that is variable depending on the temp I have set.
-
Allow the swapping of Smart TRV data from room to another room
What i mean is that if you need to swap a TRV from one room to another (very rare occurence) like I have had to do (moving noiser TRV from bedrooms to other areas) then i would like the option to keep the statastic from its original placement onto the new TRV. Looking at my Energy IQ today shows one room used 3m3 of gas…
-
Adjust humidity readings (Humidity offset)
Graag een optie om een offset mee te geven aan de luchtvochtigheid. Zelfde optie zoals bij de temperatuur
-
Energy IQ to take account of hot water
I find the energy IQ quite useful but it would be so much better if it took into account the gas usage for heating hot water. Can this be implemented so that energy usage for hot water can be shown both separately and combined with heating?
-
Balance AC without shutting off (and possibly breaking) the heat pump
I tried out Balance AC feature, nice that it has one month free try available but terminated it. Balance AC always turns off the heat pump, several times per day to save energy. This behaviour is against all the heat pump vendor/reseller and national heat pump associations guidelines, at least in Finland where pumps are…
-
Always on display
Beste Ik zou het graag zien (in de toekomst) dat de temperatuur altijd af te lezen is vanaf de thermostaat, zonder op die knop te moeten drukken. Kan dit worden gerealiseerd? Dit dan vooral bij de bedrade thermostaat zodat het geen batterijen kost.
-
Hot water schedule
is it possible to create a separate schedule for the hot water when in away mode? it is really annoying not being able to adjust the hot water schedule more accurately and automatically when we are not at home.
-
Enable Temperature Sensor & Radiator Thermostat to display temperature in Fahrenheit
I live in the USA and own 4 temperature sensors and 5 radiator thermostats. The app shows the temperature settings and readouts in Fahrenheit, but the temperature sensors and the radiator thermostats do not, which makes it extremely not user-friendly for imperial countries. Furthermore, you cannot choose the choice of…
-
EnergyIQ compare to same month last year not previous month
The energyIQ graph compare the last month with the current month. This doesn’t make much sense because any changes are likely to be seasonal and weather dependent rather than as a result of any actions. It helps to reduce energy usage and costs if we are comparing year on year consumption
-
Eco->Comfort slider for each SRT
There's a few of us that want the SRTs to work slightly differently. I want them more open so there is more over shoot and more residual heat, some want them more open to stop too much heat being returned and others want them more closed and having tight control on the temperature. I suggest an Eco-> comfort slider so in…
-
Virtual Tado TRV as workaround for lack of a bridge range extender
As I have a large 3 storey home with a side extension for which the tado bridge cannot communicate to all of the TRV's/radiators on my property and no sight of a hardware/software fix anytime soon, I intend to implement a workaround using Samsung smartthings and some temperature sensors to give me ability for the rooms out…
-
More detail on device errors - Wireless Receiver
Quite often the Wireless Receiver is showing 'device errors' (blinking hazard light) but none of the devices actually have any issue. I believe that this condition is also explained by the fact that a software update may be in progress. However, this is not at all obvious. It would be really good if there was an option to…
-
Show temperature with one digit on the smart thermostate
Hi, It would be great if the temperature you want shows on the display of the smart thermostate with one digit instead of zero digits. It is strange that the current temperature of the room is shown with one digit but if you change the desired temperature for instance to 19.5 degrees it shows as 20 degrees. Why not show…