-
"summer mode" to keep radiator valves open during summer
The problem is: If I connect all the smart radiator thermostats to my zone controller and I don't want to heat any room (because it is summer now) this results in all the radiators being 'closed' (or 'blocked'). This makes the total central heating system volume smaller (since the radiators are essentially cut off from the…
-
Modus koelen of verhogen temperatuurbereik i.v.m. vloer & radiator koeling
Ik heb een warmtepomp, welke ik met deze buitentemperaturen op de modus 'koelen' heb gezet. Echter staan de radiatoren nu dicht, omdat de Tado thermostaat/temperatuursensor niet op de koelen kan worden gezet. De temperatuur in de woning is nu ook circa 25-26 graden en ik kan ook niet 'vals spelen' door de gewenste kamer…
-
"Summer/Cooling mode" for wall thermostat
Hi there, I have an underfloor heating with a cooling function. In summer, cool water can run through the floor to cool the room. For that I currently need to set the temperature to max (25°C) to keep the thermostats open. If the room temperature would rise above 25°C the thermostats would close and prohibit a cooling…
-
HomeKit automation: resume schedule
I am having trouble understanding why the feature to resume schedule can not be triggered by a HomeKit automation. Surely this should be a fundamental feature?
-
Disable geofencing for hot water
It would be useful if we could disable geofencing for hot water so that if we go out or go away the heating turns off but the water is heated as per the regular schedule. The current options of either having the water permanently on or permanently off in away mode are not really ideal at all.
-
Hot water control like in V3 - other device control i.e. Apple Home, Google Home or Home Assistant
I have found it impossible to see any control of the hot water in any of the Matter/Thread control systems. It is impossible to add the wireless controller X to any of Apple Home, Google Home or Home Assistant. The only place that hot water can be controlled is through the app, and then only with the facility to set a…
-
Simple Sensor for indoor, outdoor and swimming pool
My house is equipped with TADO system. However, I have some room that I like to know the temperature&humidity without using a thermostat controler. Besides, I wish having a thermometer for my swimming pool that I can add to this system. I found that it's strang that Tado dont sell the sensor alone for room and for swimming…
-
Ability to rename device
When batteries are running low I get an email informing me that a particular device in a specific room has an issue. In some rooms I have 4 radiators. I then have to go round ‘blinking’ the stat multiple and watching all the stats in the room to find which one it is. it would be great to be able to rename or give a…
-
Rename Zone Controllers / Wireless Receivers
We should have the ability to rename the wireless receivers and give them proper zone names. I have 3 wireless receivers on my boiler for 3 floors in my house. When I add a new temp sensor or radiator TRV, I should be able to add it to 'downstairs' or 'basement' or 'upstairs'. Not to PR123456789! I installed all three…
-
Support for the EMS2 bus - Bosch Condens
Bosch / Junkers / Nefit boilers with the EMS2 bus have been on the market for many years now, have a large chunk of the European market share but Tado only supports relay operation for them. I myself have a Condens 2300i boiler and while the relay mode works up to a point, the TPI algorithm operating the relay can't avoid…
-
Full Air-conditioning Control
I have a house in France that I rent out with 5 air Mitsubishi Conditioning units. These units are inverter units so can perform the following tasks: cool,heat,dehumidify, fan, the IR controllers interface looks to of been created by the same guy that invented scientific calculators. Great if you know what you are doing…
-
Turn off open window notifications when heating is not actually on
Our Tado is installed in a village hall. When the hall is being heated I can live with the 'open window' notifications that occur when people come and go at the end of each letting but when the heating is not actually on (like today Thermostat set to 18 but inside temp is 26) the notifications of 'open window' are rather…
-
summer mode entry
Good morning, I am a loyal customer of yours but I would like to suggest a small change to the settings of the tado valves. During the summer period when the heating system is off the valves are closed in the sense that all the valves close the radiators forcing the valve spring keeping it closed, over time the valve…
-
Precool room when in away modus
It would be great, if the cooling could start, also in away modus, when approaching the apartment.
-
Please add a “make all days same” copy/paste feature
I’m sure like many users, I want my timer to be set with the same settings for every day of the week. As it is now, I have to laboriously copy/paste the present day adjustment 6 times in order to update it to make all days the same. Why isn’t there a simple one click app button in the scheduler to easily copy the present…
-
Set the status of the radiator valve to off when reaching temperature.
Currently if i set the smart radiator valve X on 22°C, and reach the desirable temperature, the valve is closing but the status of the valve is not off but 22°C because that's the desired temperature. It will be nice to be off so I can turn off my distribution pump via smart plug, oparated with google home in combination…
-
Summer mode for district heating areas
Hello. I know this has probably been asked tons of times, but it's a feature that must be implemented as soon as possibile. Tado products can be used in totally autonomous heating systems as well in semi-autonomous systems like district heating. Here in Italy, in many ares we have district heating which is operational…
-
Child Lock for the Smart AC Control V3+
Hello, I would like to propose a new feature: Child Lock for the Smart AC Control V3+. It would be useful to prevent accidental changes on the unit. Could you forward this to the development team?
-
Early start, time to temp
My 10 year old Nest thermostat had 2 features that I now miss after moving to tado X thermostat. 1. early start so my room is at temperature at my scheduled time when I get up. 2. estimated time for room to reach temperature. Can these features be added to Tado X ASAP as I really miss these and expected them to be there. I…
-
Smart AC Control V3+ / Setup Quiet Mode
Dear Support, It would be a great plus for the product tado smart ac control v3+ to support quiet mode. The controller already supports fan control and adding this feature will provide the benefit of completely giving away the hard manual controller of an older air condition. Maybe a generic mode could be added for the…
-
Exposure of additional information to Matter for Tado X Radiator Thermostat
Hello, I'd like to ask if the development roadmap for the Tado X Radiator Thermostats has the exposure of additional entities to Matter planned in the near future? I'd like to see the battery % and also the valve position (valve open %) directly within the connected home automation ecosystem through Matter, which is…
-
Thermostat to show more details on Identification
Hello! There is a feature that I find very useful on the valves (model X), which is that when I identify a valve, it displays “Hi!” followed by its current setting. With Home Assistant, when I open a window, this allows me to turn off the radiator and display the setting for confirmation, for example. I would really like…
-
Pre-heat and early start for Tado X
Hello, Just bought the tado x System and I am a bit disappointed that the pre-heat and early start feature are missing. Are there any plans to implement those two features? Please implement those two features🙏 Thanks, Florian
-
Summer eco
Is there a summer eco setting or can we have a summer eco setting? This could work really simple with one on/off toggle like the “Early On” feature (Early on known to us in the industry as weather optimisation). How this could work is the end user could turn on/off summer eco. when on you could set your own summer eco temp…
-
1 Hour Boost Hot Water
Hi, Would it be possible to add a “1Hour Boost” Button for the hot water. This would be great feature for when hot water is needed out of your schedule. Cheers👍
-
Add missing features from V3+ to X app/system
On Tado support page https://support.tado.com/en/articles/3387209-how-do-i-set-up-my-tado-room-smart-schedule However this is for a V3+ system. If you have the newer X system, the following features are not implemented: - No schedule days - Edit time block - no geofencing option - Away - no preheat before arrival option -…
-
Add (back) hot water schedule to Tado X
I would like Tado to bring back a schedule for the hot water boost function. I have a combi boiler controlled by opentherm. It has a preheat comfort mode that keeps some water hot in the heat exchanger so that you get hot water more quickly . For economy I only really need this for the morning and evening rush so would…
-
show humidity on room tile
Why do I have to go into a room to see the humidity? There’s enough space on each room tile to add the humidity figure.
-
Add humidity in the tiles
The current tiles have enough room to add more information like humidity. Additionally you could a a toggle in the settings to toggle on/off certain displays.
-
Boost Heating All Rooms - manually change duration
Hi, In the Tado X system it would be great if we had the option to adjust the time when the 'Boost Heating All Rooms button' is pressed. The default appears to be 30 mins, but rather than waiting 30 mins and pressing it again it would be great to adjust that time to something else like 60 mins. Also the same thing for the…