-
Suggestion: enable Homekit Away/ Home automation
Tado should allow homekit users to toggle the home / away status of tado, using homekit automations. Issues; - Expensive - Tado charges £29.99/y just to toggle auto geofencing (extortion). - Privacy issues - I have to always share my location data with tado. I don't want to do this. - No support for guest / multi house…
-
Less confusion about being at home
The Tado app has a small piece of code in the Geofencing area which pulls the trigger defining that one is at home, by recognising a home network and logging into it. It has a small oversight which confuses it. In an old thick walled house it is often necessary to fit wireless repeaters or powerline wireless nodes. They…
-
Tado X and home assistants (adding important elements)
I added official integration, but for tado x I see only outsite temp, localization, solar energy (prediction) and tado mode nothing else. I need hetting status, actual temp., sett. temp., humidity , opened window status, etc. For all added thermostats. For version V3+ all info is available in home assistant (google home…
-
Global slider to adjust temperature within schedules.
Could we have a global setting to increase or decrease the temperature asked for by the TRVs whilst in a current running schedule. For example I have a current schedule running for beginning of Autumn here in the UK, but sometimes it's colder than expected or even a bit warmer than expected. The ability to adjust a global…
-
API Integration for Energy IQ
I use the energy provider Octopus In the UK, and they provide me with an API key for my account that can be used for getting meter readings and other things. It would be so good if, in Energy IQ, I could put in the API key so that the meter reading were added automatically.
-
Energy IQ - Usage is not based on actual meter readings
We were away from home for about one week and wanted to try an experiment with usage data. Our heating was in away mode throughout and did not switch on. I submitted regular meter readings within Energy IQ at the start of April, then on the day we left, and as soon as we returned, and on the following day. The meter…
-
Air source heat pump linked to UK's Octopus Energy Agile Tariff
Tado should add the ability to heat up the water cylinder using an air source heat pump based on the cheapest energy rate of the UK's Octopus Energy Agile Tariff. This could save lots of £. It would need some AI or the like to spot what is likely to be the cheapest rate for the day, though that may be quite stable and for…
-
Add command ON/OFF of the system in the wireless sensor Thermostat
Hi is possible add to the wireless sensor thermostat the command of on/off of the system, like is in the app of mobile. The same way that the temperature of the hot water is adjusted to the thermostat menu. Thank
-
Ensure that Tado Support reply to support requests
Hello, I have messaged tado customer support numerous times over the past few days (including setting up new message threads). However, I have not received a reply. My suggestion for improvement is that you improve this situation and make sure requests for support are answered. Mine is quite urgent because my tado has…
-
App Ideas - 'call for heat' alignment
Issue: my heating is on a lot through the day. I'd like better visibility of when the boiler has been triggered (called for heat) and by what. And better control so I can (or the system automatically will) try to align devices calling for heat (so perhaps 3 devices call for heat together for an hour, then all go off for an…
-
Adjust support expectations; replace the bot with a form
tl;dr: Having a support chat is giving a false impression of one actually getting one-on-one, immediate support. I do however understand why tado absolutely wants people to go through the bot instead of just sending an email. So how about we compromise and everyone gets something they want… Long version: Looking through…
-
Daikin Heat Pump Compatibility
I am looking for a smart home heating solution and contacted support to assess compatibility for Tado X which states it accommodates under floor systems. Support informed me that Tado X is not compatible with Daikin Altherma R F - EHVH-CB and Daikin ERLQ006CAV3. I would suggest adding compatibility as this is a widely…
-
Tado X suggestions
(I originally messaged this direct to Tado but they asked me to repost it here.) I have read that currently your Tado X heat pump controller supports only some makes of ASHP as of yet but based on customer requests you will add more. I am therefore contacting you to suggest both Samsung Mono HT Quiet, and Daikin Altherma 3…
-
All room graphs in 1 place
Please offer either a consolidated graph for all rooms, or an easier way ('next, next, next...') to browse the room graphs. Currently it's tedious to exit each room page, enter the other, tap the graph icon; repeated x times.
-
Maximum opening percent and time on radiator thermostate
To ensure not to send hot water out of the radiator, it could be helpfull to could adjust the maximum opening percentage combined with maximum opening time, followed with a minimum closing time.
-
24 hour clock
The smart schedules are set using the. 24 hour clock. However, the next event for each room uses am/pm. I know I live in the UK with its outdated time but it would be useful for users to select a consistent 24 hour (or am/pm) format.
-
Viesmann DHW Control - Set Temperature in ECO mode
I have Viessmann Vitodens 100-W B1kF connected via OpenTherm to a Wireless Receiver (EU) version. There seems to be a problem with DHW and I would like to share my experience after investigating and talking to Tado about it. I hope this suggestion will help others so that maybe Tado implements it. Situation Viessmann has 2…
-
Boiler Immergas compatibility with digital bus
I just bought an immergas victrix extra 32 boiler and found that it is not compatible with the digital bus and I had to connect it to the on/off relay. can you make it compatible please? Thank you
-
Merged: Manage more than only one home-house in one/each account
This discussion has been merged.
-
Away/home status in Alexa
Hello, Since ifttt is OUT, it's important to have the tado status return on Alexa routine. We need to have this information: away, home. I think it's the same for google. Regard
-
Low/High humidity notifications
Would be great for Tado app to send a notification when a room has low or high Humidity, with the ability to set the level that the notification can be triggered.
-
Activate open window detection with external window sensors
I would like to be able to use my window/door sensors to activate ‘open window detected’. This would be a great improvement as it will speed up this process and will keep ‘open window detected’ on until I close window/door. I know this can be done indirectly by setting the heater to “off” with ifttt but this means that it…
-
Set a manual time limit on Manual Away Mode to go back to auto.
Set a manual time limit on Manual Away Mode to go back to auto similar to the manual timer mode on the TRVs/Thermostats.
-
Set the "Follow Me" functionality of my Midea Air Condition from the App
Issue The air condition Midea Silent Cool 26 Pro WF is equipped with a so-called "Follow Me" functionality. Activating the feature via the included remote control or on the device itself makes the AC use the remote control's temperature sensor to measure at the location of the RC. Tado is not respecting this setting and is…
-
[Released] Rechargeable batteries in Smart Radiator Thermostats VA02 hardware revision
tado EDIT 10.02.2021: We have released support for Eneloop 1900 NiMh rechargeable batteries for the VA02 hardware revision of the Smart Radiator Thermostats. - Why only Eneloop 1900 ? Because other rechargeable batteries might be too thick to fit into the battery compartiment because they are thicker than Alkaline…
-
Child lock for wireless temperature sensor
As per the title. The TRVs have a child lock function, but the wireless sensors cannot be child locked. As the wireless temp sensors effectively control the heating in the same way as the TRV, it doesn't make sense to not have child lock on them. Thanks
-
Home Screen - Flag/highlight rooms currently on manual override
It would very useful to see on the Home Screen which rooms, if any, have been set manually using the app or, more likely, a radiator control (I.e. and, therefore, are not following the schedule). On too many occasions, I’ve discovered a family member or visitor has adjusted a radiator control, which has defaulted to ‘until…
-
3rd party temperature sensor support or cheaper add-on temperature sensor
I have multiple tado radiator thermostats, but all of them are a couple of degrees out with the actual temperature. I use an Aqara temperature sensor to measure the actual temperature in the room, further away from my radiator. It would be great if the tado app could use the data of these aqara sensors to measure the…
-
Mac M1 App
Bring the iOS Tado app to the Mac AppStore to use the features in which HomeKit doesn't support (Ie. Override Timer, energy reports, timer settings). When we had access to run these apps pre MacOS 14.2 or 14.3 tado was one of the best apps to use via MacOS for M1 devices which saved me from hunting down my iOS device. It…
-
Disable TRV "calibration" when offset is changed [required for using external sensor]
As you may have read elsewhere on this forum, myself and other Tado users have been working on ways to make Tado TRVs more usable by using cheaper external sensor to read the actual room temperature and dinamically update the temperature offset of the valves with great results. The only drawback of that is that we have to…