-
Low Battery Display
Hi would it be possible to show battery status on main menu where all rooms are displayed, this would save going to settings menu to check battery status. Many thanks Stuart
-
Features of the mobile application / Fonctionnalités de l'application mobile
I am a happy new owner of a Tado system with a base kit + 6 thermostatic heads, but I had 3 questions about the mobile application (Android): 1- On the home page of the App (home icon), is it possible to see at a glance if the wireless receiver (connected to my boiler) is in heat demand for one of the different rooms…
-
Early Finish
As we have underfloor heating, the early start feature has meant that (over a few days), the thermostat has nicely learned that it needs to come on early to get to temperature. At the other end, if I set the finish time at 2200, there is no point the thermostat asking for heat for at least an hour or so before this time as…
-
Heating system efficiency score
It would be nice if Tado analyzed how efficient my heating system is. Maybe we could specify the area of the home, and with using of the consumption and weather data it would calculate the efficiency.
-
Boiler problem detection
My idea for a new feature, came to me when we was having trouble with our boiler. So the idea is tado could notify you (via the app) if it detected a possible problem with the boiler. I think this could work by tado noticing if it turns the boiler on but the heat is not increasing. As at the moment tado stays the heating…
-
App suggestion front page dashboard heating room
Can you show in the overview of the room with the small heating icon,which room is requesting heating? Right now I have to open each of them individually to see which one is triggering my kettle to run. Would be easier to see this in front screen
-
Lower flow temperature for nighttime use
Our heating is working beautifully but given gas prices and the cold, we would like a more cost effective way of keeping bedrooms warm in the winter. In practice what happens today with our tado and viessmann 200 w digital link is that the valve in one or two bedrooms partially opens every hour or so to keep the bedroom at…
-
Zones
Add the ability to set schedules for zones, keeping the individual devices as rooms, therefore seeing the temp and humidity for each area but controlling as a single schedule. Currently, you can an add multiple devices as a single room, setting a device as the master however you loose the visibility of what the…
-
2 of 3 verschillende Slimme schema's
Is het een idee om meerdere slimme schema's te kunnen maken. Welke je kan selecteren. Bijvoorbeeld: Slim schema 1: Normale week Slim schema 2: Thuis werken Slim schema 3: Vakantie (dus later uit en in bed dan normaal)
-
Heat Boost on smart Thermostat
Is there a way to enable temporary adjustments of the room temp on the Smart Thermostat? I (or the wife & kids) would like to boost the heating on the thermostat without the need to remember to open the app and “resume schedule” afterwards.
-
jamming of the needle which open and close a valve body
Je voudrais faire une suggestion d'amélioration à Tado: J'ai observé à de nombreuses reprises des blocages des pointeaux qui ouvrent et ferment un corps de vannes lorsque celui n'était pas actionné pendant un moment. Ce phénomène de grippage peut se produire en été mais également en période de chauffe dans des pièces…
-
Add option to reboot devices overnight
To improve resiliency, add an option to reboot all of the devices every night. Either the whole system or on a per device basis.
-
All thermostats history on one graph
It is very difficult to analyze the operation of the entire heating system. For example, it is difficult to see the effect of a thermostat in one room on the temperature in another. It is also difficult to say how often the heating request is sent because each thermostat sends it independently. It would be very helpful to…
-
Expand Tado product line: Radiator fans
Hi, I'd like to make a suggestion to expand the Tado product line to include Radiator fans. In my country, The Netherlands, it's mostly standard to have central heating, with radiators installed throughout your home. Since we have a mild climate, a way of projecting heat (like an A/C) is very rare. Radiator fans have shown…
-
14 days schedule (or month)
Hi I would like a way to set up 14 days schedule (or a month schedule would also work) I can only find a way to set up a week schedule. The reason is that I have my kids every second weekend. So there is no reason to warm up their rooms in the weekends, where they are not at my house. Right now I have to do a lot of…
-
Winter
Could it be possible to make a function on the app that is configered by the user. Like a configurabel remote-control on the phone. The case is that I use my tado to remote my air-air heater. There is a function on that heater I cant start, or end, by the app. Its a function on a Mitsubishi heater, Nordic. That function is…
-
Open Windows sensors
The open window detection feature doesn't work well for me. Are there any plans to add sensors to your system? Thank you.
-
Tomorrow-is-Sunday
Possibility to set next day as a Sunday to follow that particular schedule in all rooms
-
Manual valve or thermostat adjustment
When you adjust the room temp via the app you get the option to set how long it runs until it goes Back to following the schedule. But if you adjust the temperature via the rad valve or room stat then it continually stays at that temperature. .my question / idea is regardless of where the manual increase or decrease of…
-
Flame 🔥 icon
How about adding a flame 🔥 icon to the heating zones that are currently heating? Would be clearer than it is presently
-
Home page indication for rooms on altered schedule
I am new to this, and messing with the schedules to set it up comfortably. I've noticed when I make a manual change to a room schedule, and then return to the homepage, the room icons show the set temps, but the button at the top right says Resume Schedule All Rooms. What you can't tell is which room(s) are set outside the…
-
Use 1 decimal degree Celsius precision on Smart Thermostat
While the app allows setting the temperature in 0.1 degree Celsius increments, the Smart Thermostat only supports 1 degree Celsius increments
-
Stop AC from getting over temperature
I have tado AC control set to heat my office during the week. It's set to 17 degrees, but I regularly have to temporarily turn it off because it's showing 23 degrees in the room. Tado should be turning the AC off proactively to achieve the temperature requested.
-
Reminder that a schedule has been overidden "until you cancel"
When you use Google home to control the status of the heating or hot water, the schedule gets overridden "until you cancel". It would be good if tado sent you a reminder after sometime, or had the little infinity symbol on the tile (or both) to indicate that the room or hot water wasn't on its usual schedule. My hot water…
-
Text size.
Great app but the temp display is unnecessarily small.
-
Family Geofence
Would it be possible to have family members assigned to certain rooms? Example, Son staying away at the weekend with grandparents his room would be set to away as no requirement to heat.
-
Sensori Master e sensori Slave
Buongiorno a tutti, a casa io ho un sensore master che accende e spegne il riscaldamento, e due sensori slave che possono solo tenere aperto o chiudere parte del circuito. Sarebbe bello poter impostare questa situazione nell'app, in modo che nei grafici i sensori slave risultino attivi solo se è attivo il sensore master.…
-
Add a text field on devices to show their location in the room.
I have three radiators in a room. It isn’t easy to locate a TRV which needs resetting. Have to use the Hi button and work out which one isn’t responding. Easy solved by adding a text field in the devices summary screen. It could say “near door”, “behind settee” and “near hifi”.
-
Either block or support being a member of more than one Tado home
I accepted a membership request from my son’s Tado and it wiped my App configuration. Was a nightmare to get sorted. Either block accepting a request if you already have a membership or support multiple homes in the app properly!
-
Basic Wired Stat
Hi, I have a home with underfloor heating and 13 zones. I wish to upgrade. I use TADO at another property and it is great. However, at around 100 pound for a stat it is "too expensive and too smart" to buy 13 of them. I believe there is logic in a more basic phone connected wired stat. There is no need for humidity,…