-
Develop a "basic backup schedule" mode for when Tado outage or loss of internet
tado EDIT 10.02.2021: Please read my statement on this topic here: https://community.tado.com/en-gb/discussion/comment/22789/#Comment_22789 Original post: When Tado devices lose access to the Tado servers, either due to a Tado server outage (as has occured a few times), or due to temporary internet issues at the property,…
-
Matter…Thread
a few month later nothing new ? I don’t want to buy dead products…
-
Time for Matter
Being able to interconnect with other devices, sometimes produced by multiple vendors in a smart house matters(pun intended), especially when the internet goes down. A smart home is a sum of all its smart devices. Currently tado is one of the multiple weakest links at least in my home. For tado to “matter” in our future…
-
Display temperature
Please enable permanent display of room temperature. Graag (mogelijkheid van) permanente weergave van de actuele kamertemperatuur
-
Please implement the possibility of disabled the three LED lights of the internet bridge
Hi Everyone, the Tado internet bridge has three very bright LED lights. I would like to have the possibility to disable those LED lights please. A configuration as described below could be useful for all users: by default, after booting, the LED's are also on but in the app and/or the web portal you can choose to disable…
-
Always show temperature on Tado ac
Have an option to set Tado ac to always show the current room temperature on display.
-
Geofencing per room per person
My wife and I both work from home and have tado TRVs in our home offices. It would be useful if our individual rooms turned off heating when either of us leave the house. So if I’m still at home my room could stay heated but if my wife left the house the geofencing could detect that she was out and could turn the heating…
-
Open or close valve without controlling heating system
It would be nice if we could control the valve full open or fully closed without start/stop heating system. Example, i need a radiator always opened because of the pressure system and dont want it to control the heating system, just let the current water flow in.
-
Mesh system
I have a very long house with thick stone walls so the internet bridge cannot reach all my radiators. My internet system uses a mesh system to get WiFi to all areas of my home I was hoping that this type of system could be used by tado to solve my problems.
-
Working Support
Here is a really novel idea. A support service that actually supports its customers! Having run into an issue, finding out that all support is now via the chat bot. Only to find that no support engineer has even looked at the request in nearly 48 hours. Disgraceful!
-
Energy IQ - room heater size
Allow us to enter the size of radiators or UFH systems in rooms to get a better estimate of which rooms actually use the most heat. At the moment I assume the estimates are useless as my 300W towel rail is the highest usage in my home despite having multiple 2kw radiators elsewhere.
-
Minimum TRV level
When a TRV is closed down to less than 5% it probably doesn’t allow any significant flow and is effectively off. However, it still calls for heat, and the heat source continues to run when it may not be needed. It would be useful if the TRV closed fully once it reached a minimum threshold.
-
Graph scale in 1 degree increments
The graph scale is very odd. It is either in units of three or units of six degrees. This makes it very difficult to work out what temperatures the line is reading when it is between the labeled grid lines. It would be much easier to read if the graph scale was simply in units of one degree with ideally subdivisions of…
-
Alternate heat source
Would it be possible to have a button for alternate heat source. This would allow tado to work as normal but not trigger the boiler to come on. I have a back boiler that is used during the winter that heats the house and water so the boiler is not required in order to have the radiators open I currently leave tado to do…
-
TRV thermostats open without requesting heat for a back boiler stove
I have a back boiler stove that heats my radiators and hot water when we use it. - in addition to our burner Every time I do this, I have to unplug all the TRVs manually. My friends laugh at me because of this. Why is there not a mode to open the valves without requesting heat? This would also help with bleeding radiators…
-
Change currency on estimated energy report
Currently the beta “estimated energy report” appears to be fixed as EUR currency. This should be configurable so users can select their home currency e.g GBP
-
Personalised Boost heating
Is there any chance to personalise the boost heating option? Option to program time and temperature for the "Boost heating" would be useful feature
-
Battery Monitor Improvements
As a suggestion, there needs to be better battery level monitoring\reporting between the Tado application and devices. I have noticed in recent weeks that devices are reporting battery levels as "Good" but then are malfunctioning due to suspected low battery life, which is then confirmed when you re-insert the batteries…
-
Launch a range extender or upgrade to mesh network
Tado ticks many boxes but it's behind the competition in its lack of signal booster / wireless repeater. I'm unsure whether to take the risk and buy the system for my relatively large stone house given the risk of radio dropouts. If I knew I could add a range extender if required, I'd have the confidence to buy. Perhaps an…
-
Support newer version of Worcester HT-BUS
I just upgraded from a worcester bosch greenstar cdi to a worcester bosch greenstar 8000 life. On my old boiler I could connect to the digital low voltage interface bus however the new boiler the ht-bus is not supported and I couldn't simply change over I had to rewire to the old relay style. The bus interface is better…
-
A manually set temperature overrides the schedule. Let us know here if you don’t want this
I raised the following with Tado: If you indicate by geofencing that you are not at home, the heating will stop according to schedule, but not by manual settings. In other words, if you manually set the heating higher than according to the schedule and then leave, the heating will remain on. I find this very impractical…
-
Create more scenarios
Please create more scenarios than just “Home” and “Away”. Note how Philips Hue do it. Eg being away for just one day make you want to turn down the heat less than being away a whole week. Not having this option means you have to adjust the “Away” scenario all the time to fit your needs
-
2 factor authentication
Todo has a web app! It's not really comfortable to know someone can control your home just by having your login 2FA should be mandatory
-
my.tado.com : support for 2FA
Hi. There is a ETA for support 2FA for the accesso to my.tado.com ? Best regards
-
Option to show demand temperature set in the schedule on the room temperature display
It would be helpful if there was an option to show the temperature demand from the schedule as a line on the room temperature display. I know that you can see it if you hold your finger on the temperature line of the graph, but it would be much easier to see how the room was performing if the temperature demand was shown…
-
Support current and more recent Vaillant eBus controllers
Tado asserts the benefits of modulating boiler control and touts compatibility with Valiant and eBus. However, the reality is rather grim. It turns out that as of 2019-03 eBus is only supported in these scenarios using the now discontinued VR65 controller. No other controllers are supported (VR66 for example). This means…
-
Limit user access / privileges
We have family members who visit our house when we're away sometimes. We've added them (their phones) as Tado users so that the geofencing detects when they're here. Some of them have a temptation to change the settings which I don't then notice for a while. Is there a way to limit other users' ability to change the…
-
Software feature to allow a SMART TADO valve as a zone valve.
Currently the problem to have a TRUE wireless UFH system is a not there... as you need to run wires to ALL the rooms for the room thermostats... my solution would not require the running of wiring at all but simply use the Tado room thermostats wirelessly paired with the Tado Smart Valves on the manifold without a SINGLE…
-
tado° transparency time slots dark mode (ITA: tado° trasparenza fasce orarie modalità scura)
EN: The new graphic design of the temperature graph is beautiful, but there is a small problem in the dark mode. In fact, the shade of the vertical bands should be proportional to the heating intensity, as happens correctly in the light mode; but unfortunately, this does not happen in dark mode. Since in dark mode the…
-
Support for the EMS2 bus - Bosch Condens
Bosch / Junkers / Nefit boilers with the EMS2 bus have been on the market for many years now, have a large chunk of the European market share but Tado only supports relay operation for them. I myself have a Condens 2300i boiler and while the relay mode works up to a point, the TPI algorithm operating the relay can't avoid…