-
Tado linking to new boiler - app asking me to set up new home
Hi, I'm trying to set up tado on my new boiler. The app and website when I log in are asking me to create a new home. However my details are already registered so I cant register with the same email address again. How can I access my old account to set up tado? Regards David
-
Tado turned on heating without user turning it on
I had a message warning that one of the Smart rad battery is low. I ignored the message as I haven't had the time to replace it. Then this morning at 5am the heater came on without anyone turning it on. Is there a known issue with Tado that it will turn on the heater randomly?
-
Radiator Ext
Hi All, I have the tado boiler extension for the heating and have for years . Looking at the radiator valves also next , do I need another extension kit or does it not just talk to the same one the wireless thermostat talks to and bridge ? Thanks
-
Lock manual contrall for thermostatic valve
Hi All There is any possibility to lock the manual contrall from the thermostatic valve?? My daughter (6 months) like to play with the valve rotating the contrall and setting to 35degree in!summer 😂😂😂😂😂. Can I lock the possibility to change the manual programming ?? Many thanks Nicola
-
Do I need the V3+ app with a V2 bridge?
I’m confused. I have a V2 starter kit. I don’t want Apple Home integration so don’t intend to upgrade to a V3 bridge. I believe my V2 kit has always switched off the heating when the last person leaves the house. Will I benefit the Auto Assist Skill by buying the V3+ app? It seems to me, I already have it and can only lose…
-
Is polling the temperature from Smart Radiator Thermostat using API is taking a lot of energy?
My Home Automation system is polling the Tado API to get the temperature of my Smart Radiator Thermostats and I am wondering if this will dramatically decrease the battery life or it will have minimal impact. What is a reasonable polling rate to keep power consumption low?
-
Tado Extension kit to replace controller
I have a glow worm 15hxi boiler heating both central heating and hot water, controlled with a Siemens RWB9 controller. I already have a Tado thermostat and numerous smart radiator thermostats. i am wanting to swap out my controller to enhance my control of the hot water. Can I use the Tado extension kit to replace my…
-
Control when not home
I’ve got guests staying, and I won’t be there while they are. How do I get the system to disregard the fact that I’m not there, so they can control the heating while I’m not home?
-
Seperate room with tado radiator thermostat and own hot water input
In the living room I like to use V3+ thermostat to control heating. This will be connected to Tado internetbridge. We use city heating, so hot water is coming in. In a seperate bathroom I like to use a tado radiator thermostat knob Here is also hot water input, but separated from the living room input. I like to have…
-
Hot water control not working
My setup: Worcester Greenstar 32CDi Combi Boiler + MT10 I disconnected MT10 and installed the extension kit as outlined in the DIY instructions. The instructions told me only to connect two wires, blue (-) and brown (+) to the EMS block of the boiler. I did this, it powered up, extension kit is on and its all synced and…
-
Has anyone installed a starter kit/Extension with a Thermacon boiler please?
Has anyone installed a starter kit/Extension with a Thermacon boiler please?
-
Smart AC firmware update?
Hi, Has there been a firmware update for the Smart AC system in the last day? I have two Start AC units, and they both stopped working at 4am this morning and won't reconnect to my Wifi. Nothing has changed on the router, and everything else on the network is still working normally, so the only explanation that I can think…
-
Humidity advice using tado
Hi looking for some newbie help please. I checked the app which suggested excellent outdoor air quality, the indoor humidity was at 61-5 ish so I ventilated by opening all the windows as the app suggested the room was getting stuffy and it surprised me that the humidity readings increased rapidly to 71 with an increase…
-
can i set a at witch outside temperature heating should go off ?
like an outside temperature senor
-
How to schedule?
I've just set up my smart thermostat and extension kit to control my heating and hot water. I'm confused about scheduling, it seems quite convoluted to add various times of days I want the heating off and on. So for weekdays I would click the + button a few times and have it on for an hour in the morning, then and hour in…
-
Seperate room with tado radiator thermostat and own hot water input
In the living room I like to use V3+ thermostat to control heating. This will be connected to Tado internetbridge. We use city heating, so hot water is coming in. In a seperate bathroom I like to use a tado radiator thermostat knob Here is also hot water input, but separated from the living room input. I like to have…
-
thermostat setup fail to load
I have a tado extension kit, and tado thermostat and a tado bridge. The bridge is not connected to a router as I do not have internet onsite yet I'm trying to configure the extension kit using the thermostat. The extension kit links with bridge successfully, the thermostat links with bridge successfully, but I cannot get…
-
Moved house, new boiler, new/moved install?
I had an existing Tado installation which I was very happy with, but have now moved house and the new house has a different boiler installed so I require new installation instructions for connecting my Tado system to this boiler. The new boiler is a "Worcester Greenstar 28i Junior Combi Mk IV". The current thermostat /…
-
Initial setup
Hi If I install a Tado Horizontal Radiator Therermostat on each radiator will this control each room temperature via an extension kit without fitting a smart thermostat. Can I link twin radiators in the same room Many thanks Calrod
-
Purchasing a Tado system, what to buy ?
Hi, I'm looking to do a self install of the Tado Heating and hot water system. I have a Glow Worm Flexicom 24hx condensing boiler (gravity fed) that supplies heating to the radiators and hot water, with a room wired room thermostat in the hall and a Towerchron QE2 timer controller (made by Grasslin) in a first floor…
-
Extension Kit Heating Always on
Hi, we has our Tado professionally setup today but the heating is always on regardless of how low thermostat temperature is set. All seems well on the app and everything is connected, guessing it's wiring on the extension kit to our Logic 24 boiler.
-
Tado AC temperature display always on?
How can i set Tado ac to always show the current temperature? I had managed somehow to do this before (no idea how) and it was lost after a power outage and now i miss it.
-
underfloor wired heating in bathroom
Hi Whilst refurbishing my bathroom I'm thinking of installing electric wired underfloor heating but as far as I can tell the Tado system does not work with a system that has a temperature probe installed. As almost all of the underfloor electric heating units have temperature probes to stop them overheating I'm not sure if…
-
Changing my boiler
I’m updating my boiler and heating system from heat only to a combie system. How do i reprogram my smart thermostat to the new equipment
-
How to get keyboard to appear
In the iOS app on my iPad the support page has a search but the keyboard does not appear when you click in it. This makes it difficult to search! if I select to open safari browser, I can search.
-
I’m missing some functions in HomeKit....
I have the Smart AC V3+ and it’s working an absolute treat for heating and cooling. There are some features in the tado° app, however, that I cannot see in HomeKit such as fan speed, dehumidify, and plain fan (neither heating nor cooling). Is this by design? If so, on whose part?
-
Password in plain text
Really Tado? You send passwords in plain text?! Beside that I don't have a home associated to my account 😒
-
FCU WIth Chilled Water Line
Hi, Can I get a solution for FCU with chilled water line control with TADO thermostat. 3 FCU in one apartment feeding 3 Rooms. Mobile APP is also a requirement 3 Speed FCU
-
Can I get immersions heater controlled by tado?
I have two tado thermostats wired and extension kit at the boiler, however my immersions heater is upstairs and when heating is off during warm season I have no hot water, so I’m wondering can I setup another extension kit or thermostat or something anything just to get this working the way I want?! I hope I explained my…
-
Tado App
Today, all of a sudden, my app on my Android Phone wouldnt start, just got the start screen with the Tado on it. So I deleted the app, rebooted the phone and reinstalled the app. Now it wont log me in, username and pass all corret. Pressing the Sing in button gives me a splitsecond of loading, then returns to the login…