-
Do Smart TRV Basic Work With Wireless Temperature Sensors?
I really, really hope so 😬 I tested with a starter pack V3 with one Smart TRV and a wireless temperature sensor. It worked! So I then ordered 6 wireless temperature sensors and 8 Smart TRV's but accidentally Basic ones. I've only just spotted the difference, having installed one. Can anyone advise before I go further?…
-
Thermostat not triggering boiler when TRVs call for heat
Hi everyone, I'm going mad a bit over this issue. I have a fairly simply setup and can't understand why this isn't working properly. Here it goes: 2 rooms: 1 living room and 1 bedroom. Living room: Wired thermostat + 1 valve radiator. Bedroom: 1 valve radiator. To clarify: all three are tado products. Problem: TRV in the…
-
Connecting to logic C35
Hello, I have had tado connected to my logic combi c35 for a while, I changed broadband provider a few days ago and cannot work out how to get the Internet bridge connected to the new wifi, the light is flashing on and off.
-
Air Comfort is worthless, doesn't work
I recently upgraded to the v3+ app in order to get the Air Comfort functionality, which sounded quite useful. Except it doesn't work. I'm in the UK and the last couple of days have been lovely and warm. Therefore we've had the patio doors wide open all day in the same room as our Tado wall thermostat. Air Comfort is…
-
Scheduling issue
I have four time blocks, three of them work but the first one in the morning does not.
-
Battery replacement
Only had the system for a couple of months and already being told batteries need replacing .on one rad i replaced a week ago and tado says they need replacing again . Any comments welcome !
-
Upgrading an old Tado system
I had Tado installed 10 yrs ago and looking to upgrade and fit smart valves. I currently have a Bridge, wireless thermostat and a receiver wired to a Potterton Titanium condensing boiler. I understand that I need a new bridge and thermostat for smart valves to work but can I keep my existing wired receiver. Thank you for…
-
Battery dimensions and the TRVs
After growing tired of the ongoing expense of replacing batteries in TRVs (wouldn’t be surprised if the cost of batteries is equal to or greater than any perceived cost of energy usage) I invested in Duracell rechargeables, only to find they get stuck inside the TRVs and it needs needle nose pliers to get them out risking…
-
Bit of a long rant but tado is floored at a very basic level!
How many posts does there need to be on this topic? I have a very simple Tado setup, a single room using one wireless temperature sensor to control the whole heating system, internet bridge (fully connected) & wireless controller (wired exactly correctly) and for as long as I have had Tado installed I've had the same…
-
Installation Issue - Danfoss fp715si
Help needed please :) V3+ With water control Hi folks, Hopefully some wise old sage on here can help me out! :) I’m a total beginner and in fairness probably should have gotten a professional - but the dreaded YouTube convinced me to give it a try. Old kit Danfoss fp715si programmer Danfoss RMT230 wired Thermostat Pump fed…
-
Tado app won’t control Hot Water relay
I have a new v3 receiver with Internet bridge and wireless thermostat which I have tried to test prior to installation. I have applied power to the receiver but no other wiring connected. The devices are successfully paired to the bridge, connected to the internet. The app is installed on both an android phone and an iOS…
-
Multiple Zones - here be dragons
hi there! Recently joined the Tado community with a new setup for home in the UK. Since the ground floor extension was (almost) completed we had an opportunity to install UFH and also replace a very old boiler. So currently in a position where I am attempting to have tado control the entire house. The ground floor has UFH,…
-
Until next automatic change
Hello, I have installed Tado devices last week. When I change the temperature on the thermostat itself, it does not follow the schedule anymore. I would like that the smart schedule is taking over control when a new event occurs of the smart schedule. Settings Living room - Manual control on tado device: Until next…
-
Malt vs. Shake: Understanding the Delicious Difference
In the world of indulgent beverages, the difference between malt and shake stand out as timeless classics, each offering a distinctively delightful experience. At first glance, these creamy concoctions might seem interchangeable, but a closer look reveals their unique characteristics. A malt, short for malted milkshake,…
-
Heating coming on at night
Can anyone tell me why my heating comes on randomly through the night, but according to my heating graphs, no heat is called for? My boiler kicking in at least 3 times last night, so effectively wasting money heating a sleeping house.
-
Turn off specific room heating on individual geolocation
This may sound like a silly question but we live in a shared house and want to know that if me and my wife go out of the house can the geofencing turn set just our bedroom to 'Away' or does the Geo stuff only work when everyone has left the property?
-
How Do I Associate Remote Wireless Thermostat With Specific TRV In Room?
Thank you for answers to my previous question. They were enough for me to start to invest in Tado and I have bought and installed a starter kit consisting of one router dongle and a TRV and also a wireless remote thermostat to hopefully control just that TRV to test it out before going the whole hog with all the bedrooms!…
-
Boosting Online Presence: Exploring SMO Packages in India
In the realm of digital marketing, Social Media Optimization (SMO) has become instrumental in establishing a strong online presence, and businesses in India are increasingly turning to SMO packages to harness its potential. SMO packages in India offer a comprehensive suite of strategies, catering to the diverse social…
-
Problems installing extension kit, smart thermostat / Worcester Bosch Greenstar 34cdi classic
Afternoon all, Looking for any advice or assistance available to get my system fully and properly operational. For a few months I've only had the smart rad valves installed and they seemed to be doing their job. I had bought the starter kit and never got around to fitting the smart thermostat or extension kit. I've added…
-
Offline
The wireless receiver keeps going 'off line' 6 times in last 3 days, the bridge has 3 steady lights ok, and I can communicate with the room stat. Distance between bridge and receiver has been the same for at least 18 months. Is the receiver faulty? How can I check it?
-
Boiler Overheating: Valliant Boiler Error F20 and F83
Hi There I have the wireless starter kit V3 with Tado TRVs on 14 radiators. 6 of them are independent (ie in a room with one radiator) and the remainder are in rooms with multiple radiators. (2 x rooms with 2 rads, 1 x room with 4 rads). When I look at "Rooms and Devices" in the app it seems like they are correctly…
-
'Until temperature is reached'
Why don't we have this option in Manual control? We have: Until next automatic change Timer Until you resume schedule Timer should be changed to 'Until temperature is reached' I have Google Home automations as 'Set point' option which seems to kick off Manual control in tado, which I have as Timer option at 45 minutes.…
-
Bridge Pairing
My bridge pairing light keeps flashing and app shows as inactive
-
Three valves in the same room
Hello everyone, I just installed my Tado system. In a room I have 3 radiators with 3 TADO valves in each of them. Currently I have configured it as 3 rooms because some areas cool or heat before others. If I combine the three valves in the same room, I will only have one setpoint temperature, but the question is: ¿Will the…
-
I need help with wiring
Hello, Anyone help me with some wiring. I have an old dial switch.
-
Will tado work with my radiator valve?
I have a radiator valve, which seems to be the correct size to be a Danfoss RAV, however when I try attach the adapter it is very loose, which I guess is because it's made to be put onto valves with 4 indents, and not 2 indents like mine has. Now my question is will I even be able to put a tado onto this one?
-
Hot water does not heat up but heating works from tado app
Hi All, I have a Suprima 40L boiler with Tado thermostat and extension kit. Smart Thermostat RU1411FT01050581566464 Firmware: 54.20 Extension Kit (BU2542927872) Firmware: 54.20 Internet Bridge IB2817328640 Firmware: 92.1 In settings: In rooms and devices, the smart thermostat is stated as Connected and good. The hot water…
-
Why does one SmartRV drop out?
I have had Tado working fine since the beginning of October but every now and then and sometimes twice in the same day one tado SRV disconnects from the app. I remove it, remove the batteries and reinstall and connect again and all is well until the next time.
-
Smart thermostat not working
Hi.My Tado radiator Thermostat stop working.On The App is "offline".New battery.Is complety "death".Last connected was 19th December.Next day was complety "death".Someone can help?
-
Time Blocks (Survey)
Just wondering what everyone's time block setup looks like. I'm following the thread in the improvements group about the Comfort feature, which for me is always "cold and humid". My setup is this - applies to all rooms, all days 00:00-08:00 = 10.0 08:00-22:00 = 14.0 22:00-00:00 = 10.0 Only exception is bathroom, which has…