-
New to Tado - I have cast iron rads and never once has my tado hit its target heat.
Can anybody explain what I’m doing wrong? I’ve put the thermostat in my son’s room as he has a monitor in there with the temperature on too so that I can check. I’ve set it to be 21 degrees and the tado and his monitor say 19. It’s been this way for 24hours, never reaching its set temperature.
-
Delay removing heat after all valves close
I've got a recent Baxi condensing boiler connected with Opentherm via the wireless remote kit that supports Opentherm. When any of the radiator valves call for heat the boiler is switched on almost immediately, however after the last valve closes the demand for heat can remain for over 10mins with the pressure bypass valve…
-
Will this setup do what I need it to do?
Hi Guys, I’ve been reading up on all the Tado stuff for the last few days and I think I know what I need but just wanted an opinion or two on whether I’m on the right lines before I go ahead and purchase. I live in a recently built house with three floors including a dormer. The boiler is Ideal with two danfoss (TP5001 I…
-
Heating power percentage and calling for heat
The API exposes a heating power section: "heatingPower": { "type": "PERCENTAGE", "percentage": 33, "timestamp": "2022-03-11T07:15:43.873Z" } This is presumably used to render the 1/2/3 flames in the UI. But my heating system is just a plain old boiler that only supports binary calling for heat/not calling for heat states.…
-
Energy IQ all wrong...
Hi there I've been studiously putting in my meter readings - every day in fact - in to Energy IQ. The problem is the estimated usage (and therefore cost) is totally wrong. What's going on and how do I fix it? I do use gas for showers and cooking, but my non-heating gas usage is really minimal, and presumably pretty fixed…
-
Tado Thermostat
Got a Tado V3 installation kit fitted it was the wireless thermostat I got and that was fine. But I bought 3 SRT's the wireless thermostat I put in my living room and when I fitted one of the SRT's to my living room radiator the wireless thermostat does not respond in the app or voice through Alexa which it did before.…
-
issues installing smart radiators- iflo valves
Hi, I’m trying to install the smart radiator valves. However, I’m having difficulty. I can screw the smaller section on the radiator, but unable to then fit the ‘smart section’s I think this is because there isn’t enough depth. I think I need an adaptor but unsure which one and how to fit it. Help much appreciated 🙏…
-
Strv battery
Hi so I got the low battery email and checked the app and also reported there, so removed the head then the battery plate, left it for a minute then put the plate back on and fitted the head but the warning is still showing so I take it I need new batteries?
-
Possibly of interest to some here . . .
Costo has a special offer on tado at the moment, I bought my system from them some years ago when there was a similar promotion . . . https://www.costco.co.uk/search?searchOption=uk-search-all&text=tado
-
Purchase Tado Wireless but no Opentherm - effect on modulation?
Newbie here so forgive me! Worcester greenstar 4000 boiler 3 years old, wireless 'Center' thermostat not operating despite battery change. Now looking at Screwfix: Tado V3+ Black Edition Wireless Heating & Hot Water Smart Thermostat Starter Kit- or - Tado website Wireless Smart Thermostat Starter Kit V3+ with Hot Water…
-
Not sure what kit I need!?
Hi, I’m interested in moving to Tado but I’m not sure what kit to buy. I have a combination boiler heating system with a wired thermostat. It is not a combi boiler. I have a separate hot water tank. It all goes into a Honeywell controller. I’m confused as to whether to buy the wired or wireless kit. If I buy wired, it…
-
Tado Home / Control Comms Architecture - 'Device Offline' - Meaning?
Background I have the Heating controller + bridge + numerous TRVs and a couple of room thermostats. The Wifi environment is a mesh setup with 5 WiFi points / nodes to eradicate any dead spots. The Tado bridge is plugged into the main mesh router. The WiFi supports both 2GHz and higher bandwidth networks using the same…
-
Unable to recommend
I have a simple system. Heating one room with the thermostat nearby. We are sitting warmly with the temperature nearly a degree above the set point and the heating suddenly tuns on. The explanation seems to be approximately "it's AI and it knows best". That's not keeping our heating costs down. At least I can go back to my…
-
Auto-Assist subscription - it is per user or per home
I have a V3+ system with 1 Smart Thermostat and 6 TRV. I'm considering subscribing to the Auto-Assist, but I'm not sure how the subscription model works. Does my wife also need to buy it? What about kids?
-
Can no longer find how to set Thermostatic mode
Hi, In the old version of the app you could go to Settings/Rooms/Smart AC Control and select Thermostatic or non-thermostatic mode. I am having an issue with my AC that may be related to the AC temperature measurement so I was wanting to switch to Thermostatic mode, however I can no longer see that option in the settings…
-
Why has Thermostatic Mode ended on AC Smart Controller?
I have a Smart AC Smart Controller, I would like to shut down the AC when the room temperature reaches the target. I was able to do that last year with the Thermostatic Mode. Now this option has dissapeared and Tado sends the desired temperature to the AC. This way my AC keeps turned on when the target temperature is…
-
Relocation of hallway temperature sensor
I currently have 7 smart TRVs in different rooms, and there's a wireless temperature sensor in the hallway connected to the EU Combi boiler kit via Opentherm. I'm wondering if keeping the sensor in the hallway is redundant or if I should relocate it to a more frequently used room for better temperature accuracy. Any advice?
-
My water is not heating
As of today I do not appear to have hot water.
-
My Tado system keeps showing as Offline
Our Tado App keeps showing as offline and saying it is the wireless receiver that is the problem. This will happen after working successfully for weeks and without our having changed anything. Sometimes it will just come back on but today it is staying offline. We have taken the power off and on again. Has anyone else had…
-
Have TRVs disabled my thermostats?
My central heating has 2 radiator loops, each controlled by a Smart Thermostat. This has worked fine for several years. I just bought and fitted 4 TRVs for the upstairs radiators. Today I got tech support to enable heating zones, and the TRVs are all working fine. This evening the schedule for the downstairs radiators…
-
What exactly do i need to buy
Hi all New to the Tado experience and wondering what to buy. Thank you for your help in advance current system oil fired boiler on a standard 24hour mechanical time clock. 4 heat zones with wired thermostats. Just the standard mechanical type. Twist up or down😊. Have excellent fibre broadband throughout the house 100Gb +…
-
tado v1 and v2 and thermostat mode
Hi, if i find an used tado v1 or v2 i can use the thermostat mode? Thanks
-
Tado install on Vokera Easi-Heat I 29C
Good morning New to Tado and looking forward to getting to grips with it . . But I have a slight issue in regards to boiler selection for the wireless receiver. I have a Vokera Easi-Heat I 29C and was wondering if there's an alternative for this selection to get me under way ? Does anyone have the same issue and have done…
-
Will modulation work?
Hi all. I have been interested in getting tado for a while but have held off as I was having a new boiler installed which has now been completed. I have just had a Worcester Greenstar 4000 25kw combi NG installed so need some advice on whether or not the tado products can offer modulation on this boiler so that it can…
-
private
Hello I have Tado smart radiator thermostat v3+ 3 years old How do you get new hardware (update) so that you can reverse the display (orientation)
-
V3 Wireless Receiver Installation
Hi all, I have a quick question regarding the installation of the wireless receiver. Having taken the cover off the old programmer, I am left with the attached wiring. The yellow cable is for my water and the blue cable is for my heating according to the old unit. Is it just a case of putting the yellow cable to HW NO and…
-
Useless? Tado with Air Source Heat Pump
Hi Currently got a combi boiler with Tado thermostat and radiatorr valves around the house. Works great and help turn on/off the boiler when needed. However now considering to upgrade to an air source heat pump system. I understand that the thermostat and TRVs would still be working and compatible but what's the point ? I…
-
Siri issues
Siri understands my command, but can’t make it. Despite I ask a temperature of 19.5°, Siri will set it at 19°
-
Digital EMS Opentherm connection Worcester Bosch 42cdi
Hi It's clear that it is possible to control Bosch Combi boilers based on users actual experience. But can I ask if anyone done it with a Greenstar 42cdi?. I will try tado support but that at moment is taking a long time to get a response I asked WB. their response below. I have a WIRED room thermostat with digital…
-
No heating thrmo not firing boiler
I have no idea why but last week we realised the heating wasn't coming o, did some checks and the wireles throat is recording the right temp checking the app it's recognising that the temp is low and says the heating is on the wired controller is showing the heating is on but it will not fire the boiler,,,, the hot water…