-
Gloworm Ultracom 35CXi with ClimaPro RF controller
have been looking at changing my controller to Tado but have just read this article (Connecting wireless receiver to Glow-worm Energy 30c — tado° Community) which seems to suggest that doing so will prevent the boiler for modulating which I believe would impact its efficiency. Is this correct? Is there another Tado…
-
Do existing dumb TRVs need to be in working order to replace them with Tado smart valves?
I've recently bought a house and am planning to replace the dumb TRVs with Tado but I'm aware that some of the existing TRVs don't work (this manifests in that the affected radiators heat even when the TRV is set all the way to off). My question is: do these dumb TRVs need to be fixed or replaced before the Tado valves…
-
Tado Wired Thermostat Replacing Mains Powered Danfoss TP5000
Hi all Have seen a number of posts with similar circumstances but what’s throwing me off is that my TP5000 is mains powered whereas all others i’ve seen are battery. I have an Ideal Logic Combi ES35 boiler, with 2 zones for heating controlled by two TP5000 controller/thermostats (upstairs and downstairs). I would like to…
-
Still no option to set max outgoing water heating temperature in central heating. Why?
Hi all, I actually have a TADO system I bought in 2018-2019 and I'm using 6 wifi thermostats and the extension kit wired to the digital control of my boiler. To set the max outgoing temperature for the heating of the home I had to ask directly to the developers as I'm (still) not able to do it within the app. As I'm going…
-
NC or NO
I recently was trying to replace my danfoss basicplus2 wt-p with Tado smart floor heating. When I removed my old thermostat, there were three wires, 1 connected to NC, 1 connected to COM and one connected to N. So, my question is, should I do the same thing on Tado device? Should I connect the wire to NC or NO. Tado…
-
smart thermostat and smart radiator thermostat?
Hello, I have been using the Tado thermostat for several years, and I am very satisfied with its performance. Currently, the thermostat is in the living room, where it regulates the temperature for whole house. I would like to upgrade the system so that each room has its own control. In this case, do I need a radiator…
-
2 thermostats to power 2 pumps for UFH and radiator systems from Heat pump.
Hi Sorry new to this. We have just had a heat pump installed with its own controls that are ok but not slick and clunky to control/ edit times etc. For info we have a buffer tank (separate to DHW) installed which the correct set of controls might allow me to heat up without heating the whole house at 'cheaper rates' Anyway…
-
What maintenance is recommended for the TRVs and other kit?
A heating engineer recommended that I set up a schedule to fully open all my non-smart TRVs once a month for 15 minutes as preventative maintenance. Now that we've fully switched to the tado smart system including TRVs, what is the recommended maintenance schedule? Does it happen automatically?
-
Multiple receivers and/or hubs?
Hi there, we’ve got the wireless thermostat and receiver plus multiple radiator thermostats controlling the heating around the house – all works great. But we also have underfloor heating in one of the rooms that currently has its own EPH receiver and wireless thermostat. I’d like to replace this with a Tado…
-
How to identify Smart Radiator Thermostat model number - not printed near the pairing button
I am trying to identify my Smart Radiator Thermostat model number (VA01, VA02 etc.), but cant see any reference to this printed on the sticker near the pairing button. Is this normal? Is there any other way of identifying the model number? I am trying to identify if my thermostats are compatible with rechargeable…
-
Help fitting V3+ Thermostat
Just had my kitchen completely renovated and my fitter removed my old thermostat without taking a photo of the wire layout. Can anyone advise what I need to do to connect it correctly? I basically have a red, blue, yellow and yellow/green wire. Thanks in advance.
-
What do these icons do?
First of all thank you for reading. In the app on the settings screen at the bottom on the left there are two icons that you can tap and a green tick appears. I’ve no idea what they do and I’ve searched the app and the internet. Hence I found this forum.
-
Danfoss compatibility
Hello, I recently purchased the thermostat radiator and when trying to mount it, I realised that the adapter does not fit. I tried googling for my specific Danfoss model and it seems like this is the one (it looks exactly as the one in the image - just on green instead of red)…
-
Tado to control electric heater
I have a storage room with a traditional (non smart) electric heater. I'm looking for a way to control the temperature in that room from my smart home setup. Is it possible to get a tado thermostat to control that heater in any way? Would it be possible to control a smart plug based on the temperature and connect the…
-
Tado Won’t Turn On Hot Water
I have a tado system for a while. Yesterday I ran out of hot water as the tado is not turning on the hot water according to the schedule. It turns on the heating ok. Issue seemed to have stared after the smart thermostat needed new batteries. I put new ones in and it’s all connected. Have rebooted the extension kit too.…
-
Extension Kit not connecting
Hi there, I'm new to Tado having bought a house with a system already installed - this morning we had no hot water and on checking the App, both the Smart (Wireless) thermostat and the extension kit next to the water tank were offline. I've manually restarted both devices, the smart thermostat has come back online, but the…
-
Heating n hot water settings when away on holiday for 7 weeks
Hi. We are not gonna be home for 7 weeks. Is it ok to turn off heating n hot water from tado settings?
-
Will my UK extension kit support ebus?
Hi all I've got an old tado thermostat (2018) + extension kit (2020) and a vaillant ecofit pure 835 combi boiler and the boiler's getting moved so needs rewiring. The current wiring piggy-backed off the old wiring that was originally there for the previous system boiler with the extension kit taking the place of the old…
-
SRV two different zones
Hi, I have the following zones: Hall (1 temp sensor), Living room (1 temp sensor & 1 SRV), Bedroom 1 (1 SRV), Bedroom 2 (1 SRV) Bedroom 3 (1 SRV). Is there a way of setting up my tado so when I set the temp/ask for heating for the hall, it will open all SRV. But I can still have all the individual zones too. So for example…
-
V3+ Receiver controller doesn't believe I have two control valves
I've just installed the tado V3+ unit in place of my Danfoss FP75. The closest one the Tado app can find is what they call an FP975, which looks identical. The Danfoss runs fine with my Vaillant Ecotec plus 615 connected to a two valve system. The 615 is a combi capable boiler but not used that way - I prefer a hot water…
-
Internet Bridge Pairing Light Flashing
Have just installed 3x Smart Thermostat Rad Units. All paired and working correctly. However since the installation the pairing light on the Internet Bridge is flashing continuously. Has anyone any ideas on what it means and how to fix? TIA
-
New Setup Help
So I am installing TRV's on all my rads, I have the main hallway thermostat connected to the boiler to trigger and call for heat. Now I have added a wireless temp sensor into the main rooms. How do I setup, so the person in say Room 1 can set the temperate on the wireless temp sensor, so that opens the TRV on Room 1 at…
-
Alternative system that would link to Tado?
After three years, Tado still don't seem to have the facility to incorporate an electric fire into their system. That being so, we will probably need to switch to an alternative. Any suggestions anyone?
-
New to Tado - Will this work?
I moved into our house in May and would like to get Tado up & running before winter. The house has a Ideal Logic+ C30 combi boiler driving 9 radiators and water based underfloor heating in the kitchen. There are two Salus wireless thermostats, one for the main household heating and the other for the underfloor in the…
-
After Battery change in my room stat my heating will not turn off
I recently changed the batteries in my tado room stat now My boiler does not turn off, I have had it for a few years & this is the first time I have had a problem. Does anybody know how to fix
-
What is "Air Freshness"?
I can see the humidity in the graphs for each room. Separately from that, I can see the temperature and humidity under "Air Comfort". Those make sense to me because I know that Tado monitors the temperature and relative humidity. What I don't understand is what is meant by air freshness. Is that based solely on how many…
-
Central heating not turning on
Hopefully someone can help me, i got my Tado kit sent to me today from OVO, it included wireless receiver, wireless bridge and a wireless thermostat. Set it up and followed instructions to the T, however my central heating is not coming on, the light on heating is lit up and on my app i put radiator up to 25 but still…
-
Added smart head to room with thermostat
Hi can someone explain how this works please, so have my wireless thermostat in the living room and added a smart trv to existing rad in the same room, so all house bar bathroom has the smart heads. So how does Tado control the heat in this room now or have I wasted my money ? Thanks
-
My tado thermostat isn't working, it won't change temperature, it's showing symbols like an O and c
My tado thermostat isn't working it is showing symbols like an O and two facing c's
-
How to make use of the (paid for) 'Balance' service without also paying for a Heat Pump Connector?
Hi. I have a fairly new build (2020) with an air source heat pump. It has a set of John Guest wired thermostats (Yuk). A lot of manual tuning every time I want to change the setup. And with an Octopus agile schedule, there is a lot of tuning to make the most of it. Time to look for something better... I purchased a Tado…