-
My list of features I'd like to see
It's getting on for a year since I installed Tado to control my heating and hot water and I still think it's a great system - no regrets - but I thought I would list some features I'd really like to see in future updates. I generally use Home Assistant to control Tado which works really well. I've implemented most of these…
-
Suggestion: enable Homekit Away/ Home automation
Tado should allow homekit users to toggle the home / away status of tado, using homekit automations. Issues; - Expensive - Tado charges £29.99/y just to toggle auto geofencing (extortion). - Privacy issues - I have to always share my location data with tado. I don't want to do this. - No support for guest / multi house…
-
Less confusion about being at home
The Tado app has a small piece of code in the Geofencing area which pulls the trigger defining that one is at home, by recognising a home network and logging into it. It has a small oversight which confuses it. In an old thick walled house it is often necessary to fit wireless repeaters or powerline wireless nodes. They…
-
Change this board to differentiate between actual bugs and actual enhancement requirements
Am getting increasingly concerned that this community board does not differentiate between actual bugs in Tado systems and enhancement requirements. As an example @davidyall recently identified a bug, unequivocally, in the way in which schedules are organised and what happens when there is a manual override. It is possible…
-
Tado X and home assistants (adding important elements)
I added official integration, but for tado x I see only outsite temp, localization, solar energy (prediction) and tado mode nothing else. I need hetting status, actual temp., sett. temp., humidity , opened window status, etc. For all added thermostats. For version V3+ all info is available in home assistant (google home…
-
Hot Water 'Boost' Button - 30, 60, 90min options
We have been using TADO for 2 years - and its worked well, and so recently installed the Hot Water head unit. We find that there is a big need to have a quick way to turn on the Hot Water for just enough time to heat the tank for one bath/shower or to heat the tank for a couple of bath/showers and then possibly even…
-
Global slider to adjust temperature within schedules.
Could we have a global setting to increase or decrease the temperature asked for by the TRVs whilst in a current running schedule. For example I have a current schedule running for beginning of Autumn here in the UK, but sometimes it's colder than expected or even a bit warmer than expected. The ability to adjust a global…
-
Multiple, configurable schedules
In the post-pandemic world splitting schedules by Weekday / Weekend is not flexible enough. We work sometimes in the office, sometimes from home. The kids are sometimes in school, sometimes there is a school break. And so on. It's incredibily time consuming and tedious to have to readjust schedules every time a change…
-
API Integration for Energy IQ
I use the energy provider Octopus In the UK, and they provide me with an API key for my account that can be used for getting meter readings and other things. It would be so good if, in Energy IQ, I could put in the API key so that the meter reading were added automatically.
-
Energy IQ - Usage is not based on actual meter readings
We were away from home for about one week and wanted to try an experiment with usage data. Our heating was in away mode throughout and did not switch on. I submitted regular meter readings within Energy IQ at the start of April, then on the day we left, and as soon as we returned, and on the following day. The meter…
-
Create a range extender or let us use a second bridge...
Having olny 1 bridge per house is a massive design flaw yet to be addressed by Tado. Unless you leave in a tiny house made of cardboard walls, the TRV wlll lose connection or burn batteries in only a matter I'd a couple of weeks. I live in a house across 3 floors, I really struggle with the range and can't have full…
-
Tado X and Home Assistant
I purchased the new X thermostat and valve system. I am hoping for more Home Assistant integration, as is the case with the V3 system; it doesn't offer much at the moment.
-
Air source heat pump linked to UK's Octopus Energy Agile Tariff
Tado should add the ability to heat up the water cylinder using an air source heat pump based on the cheapest energy rate of the UK's Octopus Energy Agile Tariff. This could save lots of £. It would need some AI or the like to spot what is likely to be the cheapest rate for the day, though that may be quite stable and for…
-
Different schedules in X equipment like in the V series
Is there a possibility to have the same configuration related to the schedules like in the V series? Depending on the days: M to F and WE All the days Everyday
-
Extend the diameter of the Home Area.
Way back around 2013, when I first fitted a Tado system with an extension kit as a relay control over the boiler, there was a bug in Tado's system. It couldn't locate my actual address correctly on the map and it also allowed me to set the Home Area diameter to as much as 50 miles away from home. Since moving into a very…
-
Consumption graphs: add option to scale the graph from 0
It would be great if there was an option to make the vertical axis of the consumption graphs scale from zero, instead of showing them as a "zoomed in" scale e.g. between 14°C and 22°C or whatever. It's clearer to see patterns and the peaks/troughs are less exaggerated from 0. It's also impossible to compare graphs over…
-
Add command ON/OFF of the system in the wireless sensor Thermostat
Hi is possible add to the wireless sensor thermostat the command of on/off of the system, like is in the app of mobile. The same way that the temperature of the hot water is adjusted to the thermostat menu. Thank
-
Ensure that Tado Support reply to support requests
Hello, I have messaged tado customer support numerous times over the past few days (including setting up new message threads). However, I have not received a reply. My suggestion for improvement is that you improve this situation and make sure requests for support are answered. Mine is quite urgent because my tado has…
-
Multi Home Support
I would like to use tado in my main house and in my vacation home. Currently this is only possible by using one account through the app and the other account using the web-app. I would like to have both available in the same account.
-
App Ideas - 'call for heat' alignment
Issue: my heating is on a lot through the day. I'd like better visibility of when the boiler has been triggered (called for heat) and by what. And better control so I can (or the system automatically will) try to align devices calling for heat (so perhaps 3 devices call for heat together for an hour, then all go off for an…
-
Be able to see when heating was on in all rooms on one chart.
I like that I can see what times of the day the heating came on in a given room, but it would be great if I could see all the times the heating came on, in all rooms, at the same time in the same chart. This would help me to see my usage much better than checking 7 devices separately and reduce energy usage. E.g. I may…