-
Hot water
You should be able to see from the app if there is hot water, when the boiler is calling to heat for hot water.
-
Window open, show witch room window is open in with app
Nice would be to be omformed in Tado app, witch room detects window is open in. Right now message display: Window open, turn off heating
-
Send notifications when firmware downloads taking place
Recently at 04:00 all my tado devices disconnected from the internet and all smart radiator valves turned to off. During the day various devices reconnected then disconnected again. On investigation I found the Smart valves were being updated with new firmware. On continuing tado I was told that firmware updates can…
-
Icons for each room type
Can you give the ability to select a range of icons that can be applied for each room that we have. The Hot Water icon is a great example of a visual icon that is easy to see very quickly. We have 14 buttons for heating rooms in our house and it would be very helpful if there were icons for different rooms. For example,…
-
Temperature slider should not jump to a certain position but slide from current temperature
There has been an unwanted design change in how you change the temperature in a room with the room temperature slider. In previous versions of the Tado app you could place your finger on the slider and subtly slide the slider half a degree or other amounts up or down. Now, when you place your finger on the slider, it…
-
App colours based on heating on or off
It makes no sense to have the app colours be based on a subjective assessment of the temperature the room is set to. It would be far better to have the colours change from, for example, green when at temperature and not heating and orange when heating. When I look at the app, I want to know quickly which rooms are heating…
-
Better accessibility support in the mobile app
Hi there, Due to the lack of features in the web app (which is bizarre enough on it's own), I'm forced to use the mobile app on a tablet to access a dashboard on a device large enough to read and interact with as I age and my eyesight increasingly worsens. I'm cool with getting old (ok no I'm not, but there's no one to…
-
History graph (also) in web app
I'd love to have the history graph of devices also in the web app. First of all because I have a larger screen and thereby better readability. Also I (ab)use the web app for another building, as multi-home support is not there.
-
Energy IQ in tado web app
Hi, I'm a user of both the mobile and web apps. Would you consider adding the Energy IQ info in the web app as well? For this particular section, I always have to switch to the mobile app. This is the current dialog in the web app that appears when you click Energy IQ. The display space would also be more generous in the…
-
Add timer option to Geofencing option
Add a timer option to the Manual select Home / Away Geofencing options, so that you can override any devices that are reporting as home but are not at home for a specific time length or indefinitely and on the flip side ignore devices that are away. But after the timescale is up go back to manual mode ;)
-
Limitations for larger properties
So, I've got a large property - 19 rooms 10 downstairs including hall, 9 upstairs including landing. Its an odd L shape as well which means i have concerns about distance. I was excited when i read tado supports 25 devices... and then i realised the limitations...having spoken with 1st line support... I want to zone each…
-
Offer a cheaper radiator valve.
In rooms where a wireless temperature is used as the control device there is no need for the SRVs to be able to sense temperature. Why not offer a cheaper version which only opens and shuts the valve as demanded by the wireless sensor.
-
Range extender
I'd like to have a range extender for my tado products, so when my bridge can't reach all Tado units, I can put a device in between that will repeat the signal. One solution could be a repeater, like IKEA has for their Tradfri line. Another option would be to switch modes on a bridge, so it could be used as a secondary…
-
Control zone valve and boiler with receiver? (Underfloor and radiator zones)
Hello, This is a new system we are setting up as we have just done an extension with underfloor heating and fitted a new boiler. We have underfloor heating one large room(the extension) downstairs and then radiators in other rooms. We have 2 zone valves installed, one for the underfloor heating and one for all radiators.…
-
Heating advance
Hi, This is an old idea that hasn't occurred to Tado as yet. My old school heating controllers have always included a Heating Advance Button. It's a simple idea - if you have a day that starts a bit earlier than usual, you just advance the whole heating programme with a single click, or turn of a knob. The next programmed…
-
Add max. valve opening on thermostats!!
It is crazy how my thermostats are often overheating causing a loss since the exiting water in my radiator is boiling hot. This is CRAZY EXPENSIVE - but app still calculates this as savings which is simply wrong. Add the functionality to limit water flow e.g 25-100%! Add the functionality to set max time on the max water…
-
Maintenance Service for improved longevity and reliability
I have used Tado throughout my home since mid-2017. It has always gobbled batteries; around 200 in that time (although there is always plenty of battery life remaining when they don’t have enough oomph for the SRVs, and I recycle them for other equipment; the low battery warning email always says that Tado is working to…
-
Selección retardo cierre válvulas
Buenas Creo que sería muy buena implementación poder elegir en la app el orden preferencia entre la señal en el relé del termostato sobre el cierre de la válvula de los radiadores. Esto sería para cerrar antes la entrada de agua general mediante la señal de las válvulas y después las propias válvulas inteligentes, así…
-
Lower hysteresis for underfloor heating
We have Tado controlling our underfloor heating but it has two issues: it's not learning and the hysteresis is too big. If I set the room to 20C then the underfloor heating doesn't come on until the temperature has dropped to 19C. It then runs the boiler until the room hits 20C but the residual heat in the floor keeps the…
-
fonction anti vol
Bonjour, Nous avons des chambres en location court séjour. Vos thermostats se déclipsent bien trop facilement, un système de verrouillage est indispensable pour nous car ce matériel est fragile et couteux bien cordialement
-
Group Adapters
Like most folks, I heat certain rooms in the morning, certain rooms during the day and certain rooms at night. I should be able to merge adapters into a group and be able to turn on, off and set temps at a group level
-
Worcester Bosch 4000 ems control
Please enable support of EMS / Ebus functionality so Tado can control modulation of this boiler
-
Tado Windows Desktop App
Does this exist or are there any plans to create one? Personally I still find it easier to manage things on a desktop / laptop than a phone screen.
-
2 steps verification
Hi, I am wondering if you are implementing two steps verification soon? Thank you!
-
Room view: change from tiles to list
Hello I have several rooms, and floors, and I find since the early days that the tile view is quite confusing. I always waste time in finding a specific room. There is a lot of screen space wasted, so I must each time scroll down. On top of that the colour codes and why and how a tile would change colour remains unclear to…
-
Heating Bills For Oil Heating Systems Inc Hot Water
Can a modification be made to the usage tracking heating bills to include the option for oil heating systems. Also, there should be a breakdown of usage by hot water which there currently isn’t. If you do enter data from your usage the system does not calculate based on actual usage data and seems to estimate it. This in…
-
Visualize heating requests of all rooms in 1 graph
In the app I can see the temperature and heating request of a room. I would like to see the heating request of each room in a single graph, preferably over multiple days. I made the graph below using the API in just a few hours, and I think Tado should add such a graph to the app as well.
-
Smart light switches
Hi Loving my tado system and progressively getting more and more smart items in my house. I currently have tado, another company smart door bell and robo vaccume. This now takes 3 app to administrate. My next smart desire is smart light switches. I don't want bulbs as switches need to be permanently on. I would of thought…
-
Balance AC without shutting off (and possibly breaking) the heat pump
I tried out Balance AC feature, nice that it has one month free try available but terminated it. Balance AC always turns off the heat pump, several times per day to save energy. This behaviour is against all the heat pump vendor/reseller and national heat pump associations guidelines, at least in Finland where pumps are…
-
Device grouping
Be able to group devices in to zones/areas Rather than having to turn all devices on if needed set a group for example downstairs/upstairs or whole house which would turn the grouped devices to the same settings